BMW Engine Parts for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Febi-Bilstein "Cold Climate" CCV Kit - 11617533400S1
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:28304463
Part#: 11617533400S1
In Stock
$ 238.99

This product was last offered at the strikethrough price on
04-15-2026

$ 180.99 USD
Free Shipping on orders $49 and up
$ 180.99 USD
Free Shipping on orders $49 and up

After the introduction of the M52TU/M54 engines, BMW observed an uptick in CCV-related issues, especially in cold regions. Vehicles operating in extremely low temperatures often encountered a blockage in the CCV dipstick hose, leading to elevated crankcase pressure and visible blue smoke from the exhaust. To address this issue, BMW introduced cold climate-specific hoses with foam insulation, preventing condensation and facilitating quicker oil warm-up. This kit incorporates top-notch reproduction cold climate hoses to ensure optimal CCV performance across all weather conditions.

The crankcase ventilation valve, known as the oil separator, PCV, CCV, or crankcase pressure regulator valve, plays a vital role in redirecting oil from your vehicle's intake system back into the engine oil pan. This system comprises numerous plastic and rubber hoses, prone to damage due to prolonged exposure to chemicals and heat.

Designed to tackle or prevent impending CCV system failures, this kit includes four foam-insulated hoses made from durable plastic capable of withstanding heat fluctuations and chemical exposure. Additionally, a new ventilation valve is included for a comprehensive and long-lasting repair solution.

Signs indicating the need for crankcase ventilation system replacement include:

Whistling sounds from the intake manifold, caused by crankcase pressure venting through holes in the CCV hoses. Blue smoke emitting from the tailpipe, indicating oil consumption. Excessive oil usage. Milky or yellowish buildup under the oil cap, suggesting condensation due to ventilation valve malfunction. If you're experiencing misfires, lean fuel codes, decreased fuel efficiency, or noticeable oil consumption, it's advisable to overhaul your crankcase ventilation system. Opt for this reliable system from Febi-Bilstein for a repair that meets factory standards and ensures consistent performance.

Show More Show Less
5150 Autosport - Corporate Logo
T#:26171655
Part#: ATH-HG-CR-M50-84
Ships in 6 Business Days
$ 324.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW engine's performance with the Athena Cut Ring Head Gasket. This gasket replaces BMW part # 11121726619 and 11121726617 and is specifically designed for M50 & M52 iron block inline 6-cylinder engines found in E34/E36 chassis. Standard OEM & MLS gaskets can only handle a certain amount of cylinder pressure before they start to leak, making the Athena Cut Ring Head Gasket the recommended choice for applications making 16+ psi. A compression leak passing the head gasket can cause a range of issues, including engine overheating, loss of power, misfires, and in severe cases, catastrophic engine failure. Athena's gasket is crafted with premium quality reinforced M0115, an asbestos-free material that's original equipment approved and renowned for its superior quality. The AISI 304 stainless steel Cooper Rings bite into the aluminum head, providing maximum sealing capabilities around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2-bar boost. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Please be aware that the gasket should have a size that is 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Installation instructions: Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLS gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.
Show More Show Less
Febi - Corporate Logo
T#:363804
Part#: 11287838797
Ships on Jan 11, 2027
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
The Hydraulic Alternator Belt Tensioner is exposed to a lot of dirt, salt, and other debris due to its front lower location. This can cause the tensioner to seize and not allow the belt tensioner to adjust. Replace your belt tensioner with this OEM high quality hydraulic tensioner for many years of reliable operation to come.
Show More Show Less

Febi - Corporate Logo
T#:361338
Part#: 11311722651
Ships in 3 Business Days
$ 29.99

This product was last offered at the strikethrough price on
05-07-2026

$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up
Replacement guide rail for required maintenance

Febi Camshaft Position Sensor - Intake - E39 E46 E53 E60 E83 Z3 Z4 ...
Includes o-ring.
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:591868
Part#: 12147539165
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up
Febi - Corporate Logo
T#:28337855
Part#: 11151703484KIT
Ships in 1 Business Day
$ 108.14 USD
Free Shipping on orders $49 and up

Rubber breather pipes in various BMW applications are susceptible to cracking. Over time, engine heat and weather conditions can weaken these hoses, leading to breaks or leaks. This results in significant vacuum leaks that can severely affect engine performance.

Moreover, BMW faces a problem with oil separators freezing in cold weather, particularly if the engine isn't adequately warmed up during driving. Typical signs include a howling noise and subsequent oil leaks.

Show More Show Less

Febi - Corporate Logo
T#:361337
Part#: 11311726480
Ships in 1 Business Day
$ 38.99

This product was last offered at the strikethrough price on
10-05-2026

$ 26.99 USD
Free Shipping on orders $49 and up
$ 26.99 USD
Free Shipping on orders $49 and up
Replacement guide rail for required maintenance

Febi - Corporate Logo
T#:382327
Part#: 11142249533
Ships on Jan 11, 2027
$ 44.99 USD
Free Shipping on orders $49 and up
Replace when doing a clutch job.

Febi Water Pump Pulley - E39, E46, E53, E60, E83, Z3, Z4
For vehicles with production date from 09/1998
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:373752
Part#: 11511436590
In Stock
$ 40.99

This product was last offered at the strikethrough price on
08-13-2026

$ 30.99 USD
Free Shipping on orders $49 and up
$ 30.99 USD
Free Shipping on orders $49 and up
A common failing piece due to the plastic design.
OEM Febi Idler Pulley - Multiple BMWs
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382342
Part#: 11287841228
In Stock
$ 48.99 USD
Free Shipping on orders $49 and up
$ 48.99 USD
Free Shipping on orders $49 and up
This is an OEM Febi Upper Idler Pulley, also known as the roller pulley or deflection pulley. The upper and lower idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).
Show More Show Less
Exhaust Valve - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381763
Part#: 11347505731
In Stock
$ 26.99

This product was last offered at the strikethrough price on
10-07-2026

$ 22.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 26.99

This product was last offered at the strikethrough price on
10-07-2026

$ 22.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up


Febi Engine Mount - E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381807
Part#: 11811141377
Ships in 1 Business Day
$ 47.99

This product was last offered at the strikethrough price on
05-02-2026

$ 47.70 USD
Free Shipping on orders $49 and up
$ 47.70 USD
Free Shipping on orders $49 and up
Rubber engine mount
Performance Rod Bearing Kit - S54
Early Model S54 Engines up to 02/2003 production date
5150 Autosport - Corporate Logo
T#:26171617
Part#: 5150-HPRBK-S54-E
Back Ordered
$ 669.99 USD
Free Shipping on orders $49 and up
$ 669.99 USD
Free Shipping on orders $49 and up
Now one of 5150's best sellers has gotten even better! With a 5150 Autosports' complete High-Performance Rod Bearing Kit, you get all the parts you need to easily swap out the factory connecting rod bearing shells and bolts in one simple kit. 5150's S54 bearings are embraced by BMW engine builders worldwide. Popular for both forced induction and N/A builds, their coated bearings are "friction resistant" making thermal breakdowns that can occur due to lack of lubrication a much less common occurrence. Helping to prevent premature engine failures on street cars, and spun bearings under stress at the track when things are most critical. Proven by customers to help you finish the race even with loss of oil pressure! Kit includes: (1) Complete set of ARP S54 Connecting Rod Bolts (1) Complete set of 5150 High Performance Rod Bearing Set (1) ARP Assembly Lubricant packet Tech Notes: As with all bearings, please check your tolerances and size before installation. Due to the specialized tools needed, professional install recommended. There are no returns available on any engine bearings.
Show More Show Less
Solenoid Valve For Camshaft Adjustment
We Price Match - Give Us A Call or Chat! Requires use of open-ended wrench for installation - does not fit BMW specific socket tool
Febi - Corporate Logo
T#:16907180
Part#: 11361432532
Ships on Jan 11, 2027
$ 104.99 USD
Free Shipping on orders $49 and up
Works in conjunction with the VANOS piston to ensure proper function of the VANOS system

5150 Autosport - Corporate Logo
T#:26171649
Part#: 5150-HPMBS-M50
Ships in 3 Business Days
$ 299.99 USD
Free Shipping on orders $49 and up
5150 High Performance Coated Main Bearing Sets are made for the demands of high performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market. Tech Notes: As with all bearings, please check your tolerances and size before installation. Due to the specialized tools needed, professional install recommended.
Show More Show Less

Febi Tensioner Piston
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363749
Part#: 11311703747
Ships in 2 Business Days
$ 28.99 USD
Free Shipping on orders $49 and up
$ 28.99 USD
Free Shipping on orders $49 and up
This piston is housed by the cylinder and spring for the lower tensioner
Crankcase Vent Return Hose - E46 E39 E60 Z3
For vehicles with production date from 01/2000
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:12449
Part#: 11617504536
Ships in 1 Business Day
$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up

This is the BMW crankcase return line that goes from the intake manifold to the top CCV connecting hose. We also offer a complete CCV repair kit
Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.


This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2010 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i
1/2000-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Show More Show Less

5150 Autosport - Corporate Logo
T#:26171610
Part#: 5150-HPMBS-M54
Ships in 3 Business Days
$ 343.99 USD
Free Shipping on orders $49 and up

BMW M54 Main Bearing Performance Set is engineered to meet the rigorous demands of high-performance engine builds. Designed by Turner Motorsport, these high-performance coated main bearings offer enhanced durability and efficiency for engines subjected to extreme conditions.

  • High-Performance Coating: Treated with a specialized coating by Calico, these bearings reduce friction and prevent "spinning" under high stress, making them ideal for high-power applications.
  • Enhanced Power Generation: The coating allows the engine to generate more power while maintaining reliability, even under demanding conditions.
  • Thermal Resistance: Built to withstand high temperatures and perform effectively in forced induction and race applications, these bearings help prevent engine failure due to oil pressure loss.
  • Proven Durability: Tested extensively on and off the track, 5150 bearings are known for their longevity and superior performance compared to other bearings on the market.

Upgrade to the BMW M54 Main Bearing Performance Set from Turner Motorsport for a robust solution that enhances engine reliability and performance.

Show More Show Less
Febi Timing Chain Tensioner
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:359495
Part#: 11311743187
Ships in 1 Business Day
$ 146.99

This product was last offered at the strikethrough price on
05-07-2026

$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
This timing chain tensioner keeps the tension rail properly positioned on the BMW M42 and M44 4 cylinder engine.

This item fits the following BMWs:
1990-1991  E30 BMW  318i 318is 318ic
1992-1998  E36 BMW  318i 318is 318ti 318ic
1997-1999  Z3 BMW  Z3 1.9
Show More Show Less

5150 Autosport - Corporate Logo
T#:26171648
Part#: 5150-HPRBS-M50
Ships in 3 Business Days
$ 219.99 USD
Free Shipping on orders $49 and up
5150 High-Performance Coated Rod Bearing Sets are made for the demands of high-performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use, but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market. Tech Notes: As with all bearings, please check your tolerances and size before installation. Due to the specialized tools needed, professional install recommended.
Show More Show Less

5150 Autosport - Corporate Logo
T#:26171616
Part#: 5150-HPMBS-S54
Ships in 3 Business Days
$ 343.99 USD
Free Shipping on orders $49 and up
5150 High-Performance Coated Main Bearing Sets are made for the demands of high-performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.
Show More Show Less
Febi Water Pump Pulley - E34, E36, E39, Z3
For vehicles with production date up to 09/1998
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381779
Part#: 11511730554
Ships in 1 Business Day
$ 39.51

This product was last offered at the strikethrough price on
08-13-2026

$ 28.69 USD
Free Shipping on orders $49 and up
$ 28.69 USD
Free Shipping on orders $49 and up
Located behind the fan blade, fan clutch bolts to this pulley
Febi timing chain - E30, E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381709
Part#: 11311247160
Ships in 1 Business Day
$ 138.99

This product was last offered at the strikethrough price on
05-07-2026

$ 88.99 USD
Free Shipping
$ 88.99 USD
Free Shipping
Replacement timing chain for required maintenance


Febi Crankcase Ventilation Dipstick Hose - E39, E46, E60, E83, Z3, Z4...
For use in cold climates
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:359557
Part#: 11157532629
Ships in 1 Business Day
$ 23.99

This product was last offered at the strikethrough price on
08-13-2026

$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
From oil separator to dipstick tube
Crankcase Vent Valve
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:371784
Part#: 11157501567
Ships in 1 Business Day
$ 33.68

This product was last offered at the strikethrough price on
05-11-2026

$ 30.01 USD
Free Shipping on orders $49 and up
$ 30.01 USD
Free Shipping on orders $49 and up
The rubber breather pipes used a number of BMW applications are prone to cracking. Over the years, the engine heat and weather can take their toll and either weaken or cause breaks in these hoses. Your engine begins to run much worse due to massive vacuum leaks. Replace your vacuum pipe and restore your engine performance with a replacement tube from ECS Tuning. This Febi piece has all the right qualities; proper length, diameter, connections, and all the right bends. It's now easier than ever to seal up all of those vacuum leak problems and get your engine running as it should and your brakes functioning properly.
Show More Show Less
Febi valve cover gasket set - E36, E39, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381662
Part#: 11120034108
Ships on Jan 11, 2027
$ 49.99 USD
Free Shipping on orders $49 and up
Complete valve cover gasket set to address valve cover oil leaks

Febi Camshaft Position Sensor
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:368897
Part#: 12147518628
Ships in 1 Business Day
$ 48.99

This product was last offered at the strikethrough price on
09-01-2026

$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up
A faulty cam sensor can lead to issues like difficulty starting and stalling at low speeds. Replacing the cam sensor often resolves many drivability problems. Requires O-ring #12141748398 (not included).
Show More Show Less

Febi Cylinder Head Bolt Kit - E36, E39, E46, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363745
Part#: 11121721938
Ships on Jan 11, 2027
$ 37.99 USD
Free Shipping on orders $49 and up
$ 37.99 USD
Free Shipping on orders $49 and up
Set of 14 stretch bolts for installing cylinder head
Febi - Corporate Logo
T#:381684
Part#: 11281427252
Ships in 1 Business Day
$ 82.99 USD
Free Shipping on orders $49 and up
$ 82.99 USD
Free Shipping on orders $49 and up

This tensioner is for either the Water Pump or Alternator on cars with the mechanical belt tensioner system. Please check to ensure your car does not have the hydraulic tensioner. This tensioner comes with the pulley assembly.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Only for cars with Mechanical belt tensioner systems.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Febi - Corporate Logo
T#:381716
Part#: 11311432176
Ships on Jan 11, 2027
$ 74.99 USD
Free Shipping on orders $49 and up
Keep your engine running properly
Febi oil pan gasket - E34, E36, E39, E46, E53, E60, E61, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363747
Part#: 11131437237
Ships on Jan 11, 2027
$ 35.99 USD
Free Shipping on orders $49 and up
Metal / Rubber gasket

Crankcase Oil Separator Valve - E46 E39 E60 X3 X5 Z3 Z4
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:2855
Part#: 11617501566
Ships on Jan 11, 2027
$ 48.99 USD
Free Shipping on orders $49 and up
$ 48.99 USD
Free Shipping on orders $49 and up
This Crankcase Oil Separator Valve fits BMWs with the M52tu or M54 6 cylinder engine including E46 323i 325i 328i 330i E39 525i 528i 530i E60 525i 530i X3 2.5i 3.0i X5 3.0i Z3 2.5 2.8 3.0i Z4 2.5i 3.0i. It is fairly common for this valve to become plugged with sludge which can create rough idle and excessive oil consumption.
Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
1999-2005 E46 BMW 325i 325ci 325xi - only with M54 engine
1999-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8i Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
Show More Show Less

Febi - Corporate Logo
T#:382324
Part#: 11141275466
Ships on Jan 11, 2027
$ 31.99 USD
Free Shipping on orders $49 and up
Should be replaced each time the crank pulley is removed
5150 Autosport - Corporate Logo
T#:26204983
Part#: 5150-OPUK-M50
Back Ordered
$ 229.99 USD
Free Shipping on orders $49 and up
The M50/M52/S50/S52 engines are notorious for their well-documented problems stemming from harmonics. The vibration leads to the oil pump shaft becoming weak, causing it to either break or the oil pump nut to loosen and fall off, resulting in an immediate loss of oil pressure. Worry no more! 5150 has the solution! At the core of this kit is a hardened Chromoly shaft, meticulously centerless ground to guarantee absolute precision. This shaft is designed with an exclusive square key lock system, which not only prevents the gear from ever rotating on the shaft but also reinforces the mounting area, adding additional strength. Furthermore, we replaced the problematic oil pump nut with an extended-length bolt, which is EDM drilled to accommodate safety wire for a secure fit in all conditions. Don't wait until your oil pump fails, leaving you facing expensive engine repairs! Key Features: Centerless ground shaft made from hardened Chromoly. Bolt with EDM drilling, including safety wire. Grade 8 extended-length hardware for secure gear attachment. Left-hand threaded to prevent unexpected loosening. Double-D keyed shaft and drive gear. Fully serviceable and rebuildable without the need for grinding.
Show More Show Less
Performance Rod Bearing Kit - S54
For Late Model S54 Engines after 02/2003 production
Late Model: S54 Engines after 02/2003 production and later use M10 Bolts.
5150 Autosport - Corporate Logo
T#:26171618
Part#: 5150-HPRBK-S54-L
Back Ordered
$ 529.99 USD
Free Shipping on orders $49 and up
$ 529.99 USD
Free Shipping on orders $49 and up
Now one of 5150's best sellers has gotten even better! With a 5150 Autosports' complete High-Performance Rod Bearing Kit, you get all the parts you need to easily swap out the factory connecting rod bearing shells and bolts in one simple kit. 5150's S54 bearings are embraced by BMW engine builders worldwide. Popular for both forced induction and N/A builds, their coated bearings are "friction resistant" making thermal breakdowns that can occur due to lack of lubrication a much less common occurrence. Helping to prevent premature engine failures on street cars, and spun bearings under stress at the track when things are most critical. Proven by customers to help you finish the race even with loss of oil pressure! Kit includes: (1) Complete set of ARP S54 Connecting Rod Bolts (1) Complete set of 5150 High Performance Rod Bearing Set (1) ARP Assembly Lubricant packet Tech Notes: As with all bearings, please check your tolerances and size before installation. Due to the specialized tools needed, professional install recommended. There are no returns available on any engine bearings.
Show More Show Less


Febi Thermostat O-Ring - E23, E24, E28, E30, E32, E34, E36, E39, Z3 ...
For vehicles with production date up to 09/1998
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:13000
Part#: 11531265084
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
$ 12.99 USD
Free Shipping on orders $49 and up
O-RING:11709521

Genuine Porsche - Corporate Logo
T#:31092518
Part#: 9A700751700
In Stock
$ 1.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 1.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

Febi Oil Drain Plug
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:6628
Part#: 11131273093
In Stock
$ 6.99 USD
Free Shipping on orders $49 and up
GENUINE BMW ENGINE SCREW PLUG 11131273093
5150 Autosport - Corporate Logo
T#:26204921
Part#: CAR-CRS-S52-XT
Ships in 3 Business Days
$ 2,099.99 USD
Free Shipping on orders $49 and up
The 5150 AutoSport Pro-Xtreme Connecting Rods, made by CP-Carrillo, are designed to handle extreme horsepower and high RPM applications for BMW M50 Non-VANOS, M52, S50, S52, and M54 engines with 135 mm Rods. Constructed from high-strength, aircraft-grade steel, these connecting rods are engineered to withstand the forces generated by high-powered engines. The Pro-Xtreme design is specifically tailored to handle up to 2000 horsepower, making these rods suitable for high-performance turbo/drag racing or street/strip applications. They are also designed to handle high engine speeds of up to 9500 RPM, which is necessary for achieving maximum power output. Each connecting rod is precisely fabricated to meet the demands of high-performance engines using advanced manufacturing techniques such as computer-aided design (CAD) and finite element analysis (FEA). The Pro-Xtreme Connecting Rods are designed to be durable, reliable, and capable of handling the extreme stresses and forces generated by high-horsepower and high-rpm engines. Please note that these 135 mm connecting rods are designed to fit M50 Non-VANOS, M52, M52TUB28, S50 U.S, S52 U.S, and M54B30 135mm Rod engines. They will NOT fit M50-VANOS engines, as they require 140 mm Rods.
Show More Show Less

Febi Intake Valve - E39, E46, E53, E60, E83, Z3, Z4
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:374076
Part#: 11341438385
Ships in 1 Business Day
$ 23.45

This product was last offered at the strikethrough price on
08-13-2026

$ 19.91 USD
Free Shipping on orders $49 and up
$ 19.91 USD
Free Shipping on orders $49 and up
Replacement intake valve
5150 Autosport - Corporate Logo
T#:26171611
Part#: 5150-HPRBS-M54
Ships in 3 Business Days
$ 251.99 USD
Free Shipping on orders $49 and up
5150 High-Performance Coated Rod Bearing Sets are made for the demands of high-performance engine builds. Treated shells and coated by Calico to reduce friction, these bearings allow your engine to generate more power and resist "spinning" under stress. These coated bearings also have thermal resistant properties that not only perform in high HP applications like forced induction or race use but also help prevent sudden engine failure in the event of oil pressure loss. 5150 bearings have proven themselves on and off the track, lasting longer and outperforming other bearings on the market.
Show More Show Less

CP-Carrillo Connecting Rod Set - S54
Upgrade Your Connecting Rods in Your High Horsepower S54!
5150 Autosport - Corporate Logo
T#:26171622
Part#: CAR-S54-SCR
Ships in 3 Business Days
Starting at $ 2,149.99 USD
Free Shipping on orders $49 and up
Starting at $ 2,149.99 USD
Free Shipping on orders $49 and up
CP-Carrillo's connecting rods for the BMW S54 engine are specifically engineered to serve as direct replacements for BMW part numbers #11247834437, #11247831924, #11247834310, and 11247831331 in the BMW S54B30, S54B32, S54B33, S54B34, and S54B35 engines, with a length of 139 mm. These Carrillo connecting rods boast a range of impressive features: Crafted from a special chrome-moly based alloy, ensuring strong and durable forged rods. Their lightweight design significantly reduces mass compared to standard rods, optimizing engine performance. These rods have demonstrated exceptional strength and performance in racing environments, vouching for their reliability. Carrillo maintains stringent quality control measures, resulting in tight tolerances and precision balancing for superior performance. Each set is meticulously matched and balanced, ensuring consistent and smooth operation. The connecting rods come equipped with high-quality, non-stretch WMC rod bolts, guaranteeing stability under high-stress conditions. For those seeking even higher performance, there is an option to upgrade to CARR bolts. In conclusion, Carrillo connecting rods stand as the top choice for racers who demand the utmost in performance and reliability from their engines. With a track record of excellence and a suite of advanced features, these rods are the epitome of quality and precision for high-performance applications.
Show More Show Less

Febi - Corporate Logo
T#:371781
Part#: 11121730356
Ships in 1 day
$ 11.99

This product was last offered at the strikethrough price on
09-13-2026

$ 7.13 USD
Free Shipping on orders $49 and up
$ 7.13 USD
Free Shipping on orders $49 and up
2 required per car
Active Autowerke - Corporate Logo
T#:57616348
Part#: RTF-1L
Ships in 3 Business Days
New Item
7% off MSRP $ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD
Free Shipping
7% off MSRP
$ 140.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 130.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).
Show More Show Less
Febi - Corporate Logo
T#:6707
Part#: 11157532649
Ships in 1 Business Day
$ 19.12

This product was last offered at the strikethrough price on
05-29-2026

$ 17.68 USD
Free Shipping on orders $49 and up
$ 17.68 USD
Free Shipping on orders $49 and up
ENGINE VENT HOSE 11157532649


5150 Autosport - Corporate Logo
T#:38419052
Part#: 5151-HPRBS-S54
Ships in 3 Business Days
$ 399.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW S54 engine with the 5150 AutoSport High Performance Rod Bearing Set—a premium solution designed to improve durability, reliability, and longevity. This high-performance bearing set addresses the well-known rod bearing wear issues found in the E46 M3, Z3M, and Z4M engines, offering superior materials and precision engineering for high-RPM and high-load applications. Product Features: Advanced Materials – Manufactured from tri-metal or bi-metal alloys, these bearings provide superior wear resistance and strength under extreme conditions. Optimized Oil Clearance – Precision tolerances ensure proper oil flow and lubrication for maximum engine performance. Proven Durability – Built for motorsport, high-performance street use, and endurance applications, ensuring long-lasting reliability. OEM Replacement – Designed to fit factory specifications for an easy, direct installation with no modifications needed. Prevention of Bearing Failure – Helps mitigate the risk of premature rod bearing failure, a common issue in the S54 engine. For optimal performance, we recommend pairing these bearings with ARP rod bolts and an upgraded oil pump to further enhance engine protection and longevity.
Show More Show Less
Febi Mechanical A/C Belt Tensioner Assembly - BMW M52TU M54
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:38419099
Part#: 11281433571
Ships in 1 day
$ 64.99 USD
Free Shipping on orders $49 and up
$ 64.99 USD
Free Shipping on orders $49 and up
Keeping all of your belts tight is imperative to making everything in your vehicle functioning. If your A/C belt tensioner pulley is not keeping enough tension on your belt, your entire A/C system won't work as effectively. A usual sign that your tensioner needs replacing is if your belt keeps slipping causing the system to "squeal".
Show More Show Less