This pulley is mounted along with the hydraulic belt tensioner but can be replaced on its own. It is used for the main drive belt on the M50-M54 family engines (M50, M50TU, M52, S52, M52TU, M54, M56, and S54 engines). This is the same belt that covers the water pump/alternator/power steering systems. Replacement is a very easy procedure (requires fan removal) and will have your engine purring in no time. Belt replacement is strongly recommended at the same time. If you have a mechanical belt tensioner, the pulley can only be replaced with a new tensioner.

This high-quality replacement from Bremmen Parts is designed for exact fitment on your BMW. Whether you're looking to complete much-needed preventative maintenance, or replacing a failed roller, choose this component from Bremmen Parts for a lasting repair.

If you need the hydraulic belt tensioner, click here.

This item is 70mm Diameter. Please check the diameter before ordering.

This tensioner pulley fits the following BMWs: 1991-1995 E34 525i (M50 engine) 1992-1999 E36 325i, 325is, 328i, 328is, 323is 1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter) 1997-2003 E39 525i, 528i, 530i - Only for Hydraulic Tensioner 1999-2000 E46 323i, 323Ci, 328i, 328Ci - Only for Hydraulic Tensioner 2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi - Only for Hydraulic Tensioner 2001-2006 E46 M3 coupe & convertible - Only for Hydraulic Tensioner 2000-2006 X5 3.0 liter (E53 chassis) 2004 E60 525i, 530i (M54 engine) 1997-2002 Z3 & MZ3 2.5, 2.8, 3.0, M Roadster, M Coupe 2003-2009 Z4 M Coupe and Roadster

Ensure a leak-free oil change for your BMW with the Genuine BMW Engine Oil Drain Plug Washer from Turner Motorsport. This affordable and easy-to-use washer helps prevent oil leaks, providing peace of mind and optimal engine performance.

• Genuine BMW part ensures compatibility and quality
• Easy to install for quick and hassle-free maintenance
• Helps prevent oil leaks for improved engine performance and longevity

Seals the connection between the intake manifold and the head.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits these BMW engines:
S52 3.2L

Over time heat and quick temperature changes can cause this grommet to harden and split or crack, creating a vacuum leak and a host of issues. Replace your old, defective grommet with a new Elring part for long reliability and to prevent further issues.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M54, M52 (09/1998+)

Includes connector housing with terminals and seals. Commonly used for the camshaft position sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521732596 - Commonly used for the camshaft position sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Fix oil leaks on your BMW's passenger side engine with Turner Motorsport's CPV O-ring replacement. The O-ring failure in the CPV typically leads to slow oil leaks, and now you can address this issue at a fraction of the cost by replacing the O-ring instead of the entire CPV. Unlike the OEM Buna rubber, the new Viton Fluoroelastomer used in this O-ring is resistant to higher temperatures, ensuring prolonged life without leaks.

• Cost-effective solution for oil leaks on the passenger side of the engine
• Replaces the CPV O-ring without replacing the entire CPV
• Viton Fluoroelastomer resistant to higher temperatures
• Prolonged life without leaks
• Addresses O-ring failure due to heat cycling and oil exposure

Seals the valve cover where the bolts go through to mount the cover to block.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Fist the following BMW engines:
S85 S65 M50 M52 M54 M56 M62 S52 S54 S62 M60

CTA Tools - Spark Plug Gapper is an essential tool for accurately setting and measuring spark plug gaps, ensuring optimal engine performance. This precision tool is designed for both professional and DIY mechanics, providing reliable gap adjustments for a variety of engine applications.

• Versatile Measurement Range: The ramp gauge measures gaps from .020 to .100 inches (0.50 to 2.5 mm), accommodating a wide range of spark plug specifications.
• Precision Engineering: Engineered to deliver accurate gap settings, improving engine efficiency and performance.
• Made in the USA: Crafted with high-quality materials to ensure durability and long-lasting performance.
• Easy to Use: Simple design makes gap adjustments quick and straightforward, enhancing convenience in any workshop or garage setting.

Upgrade your toolset with the CTA Tools - Spark Plug Gapper to achieve precise spark plug gaps and optimize your engine’s performance.