BMW Engine Parts for BMW Z Series E36/7 (1996-2002)

OEM Bosch Ignition Coil Pack - E36 318i 318is 318ti 1/94-99 Z3 1.9 ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:2907

Part#: 12131247281

In Stock at Vendor

$ 201.99

This product was last offered at the strikethrough price on
05-07-2026

$ 196.99 USD

Add to Wish List

Qty

$ 196.99 USD

Add to Wish List

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This is the OEM Bosch ignition coil pack for the M42 and M44 engines. It's sold as a pack of 4 coils that replaces the coil pack located on the right side strut tower.

This item fits the following BMWs:
1/1994-1999 E36 BMW 318i 318is 318ti 318ic
1996-1998 Z3 BMW Z3 1.9

Show More Show Less

DeatschWerks DW400 In-Tank Fuel Pump W/ Universal Set Up Kit ...

T#:5389791

Part#: 9-401-1001

In Stock at Vendor

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Show More Show Less

Race German Single Vanos Rebuild - Seal Kit W/Modified Socket ...

T#:6843923

Part#: RGSVNSSK-MS

Ships in 3 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. BMW introduced VANOS in the early 90s, and it added variable valve timing to the straight six engines. Over time the VANOS unit wears out which can cause error codes or VANOS rattle. Race German has sourced quality replacement parts in an easy kit. Seal Kit: 1 PTFE Teflon Ring Seal 1 FKM (Viton) O Ring Seal 2 Copper Oil Pipe Washers *Note: a modified 18mm socket is needed to disassemble the VANOS unit. We are now offering this socket at a small charge. If you have a 1993 model single VANOS car, the 18mm socket will not work. You will need a modified 17mm socket. This kit includes the modified sockets.

Show More Show Less

OEM Ignition Service Kit - M52 S50/52

T#:556710

Part#: M52S5XTISKT

Ships in 2 Business Days

$ 287.47 USD

Add to Wish List

Qty

$ 287.47 USD

Add to Wish List

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Show More Show Less

Vacuum Gauge and Fuel Pump Tester

T#:5498468

Part#: 20300

In Stock at Vendor

$ 52.99

This product was last offered at the strikethrough price on
05-07-2026

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

A must have

Genuine BMW Power Steering Pulley - S54

T#:19787

Part#: 32427830838

In Stock at Vendor

$ 167.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 136.99 USD

Add to Wish List

Qty

$ 136.99 USD

Add to Wish List

Genuine BMW Pulley
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Cylinder Leak Tester

T#:5498460

Part#: 75500

In Stock at Vendor

$ 48.26 USD

Add to Wish List

Qty

$ 48.26 USD

Add to Wish List

Quickly pinpoint or check for combustion leaks.

Supertech Black Nitrided Exhaust Valve - Set Of 12 - BMW M50/M52/S50/...

T#:8549426

Part#: BMEVN-1030-12

In Stock at Vendor

$ 358.99 USD

Add to Wish List

Qty

$ 358.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 30.50mm Material: Black Nitride Groove Type: Triple Groove Length: 105.65mm Stem Diam: 5.95mm Size: Std

Show More Show Less

POR15 Absolute Coatings Fuel Tank Sealer

T#:1575841

Part#: POR49216

Ships in 7 Business Days

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Show More Show Less

Fuel Injector Clinic 1000cc Fuel Injector - Set of 6

T#:6924326

Part#: IS802-1000H

Ships on Jul 31, 2026

$ 683.00 USD

Add to Wish List

Qty

$ 683.00 USD

Add to Wish List

High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.

Show More Show Less