BMW Intake Parts for BMW Z3 (1996-2002)

BMW S54 Silicone Throttle Body Boot Set - With Clamps is an essential upgrade for any BMW S54 engine, designed to replace aging and deteriorating rubber intake boots. Engineered by Turner Motorsport, these silicone throttle body boots provide superior durability and reliability under both street and race conditions, including boosted applications. Unlike simple silicone reducers, these boots are meticulously designed with the same internal features as the originals, ensuring a perfect factory fitment. The three-ply construction offers enhanced strength and longevity, making them slightly thicker than the factory boots. This set includes six boots and compatible clamps, providing a complete solution at a fraction of the cost of OEM replacements.

• Enhanced Durability: Three-ply construction withstands heat cycling, vibrations, and oil exposure.
• Perfect Fit: Designed with factory fitment in mind, including all internal features of the originals.
• Complete Set: Includes six boots and compatible clamps for a full replacement.
• Cost-Effective: Less than half the price of OEM replacement boots.
• Versatile Compatibility: Fits all intake plenums, including US, CSL, and replicas using OE-style boots.

This kit includes everything to fit an OBDI M50 manifold to an OBDII M52 or S52 engine (1996-1999). It takes the guesswork out of adding the M50 manifold to your engine. The kit includes a CNC machined adapter, with all hardware and gaskets, that allows the freer flowing M50 manifold to be installed while maintaining full function of M52/S52 components including factory PCV cyclone / oil seperator valve. No vacuum leaks, no check engine lights. And the entire kit is completely reversible. Turner Motorsport has dealt with the problems from other kits and this adapter block is by far the best solution.

The base price of this kit does not include the M50 manifold. You can pick up a used manifold from a 1992-1995 E36 325i or a 1995 M3 3.0 liter. You can find them in local junk or scrap yards, online at Craigslist or eBay, or from various forums. If you would rather not deal with the potential pitfalls of a used part, we can offer a new Original BMW manifold to go with the adapter. While expensive, the new manifold is guaranteed to be in perfect condition with no cracks, warping, or foreign objects hidden inside. A new factory BMW manifold can be added to your order by selecting the option above.

With the introduction of the 1996 model year came the OBDII emissions compliant engine. Among the many changes the OBDII engines received was a more restrictive air intake manifold. Where the older M50/S50 engines continued to make power up in the higher RPMs, the newer M52/S52 ran out of breath, limiting high-end horsepower, but boosting low-end torque. Converting the OBDII cars to the 1995 and earlier OBDI manifold is a popular modification to remove this high-rpm restriction.

To best maximize the horsepower gains of this modification, you should be using the M50 manifold with bigger cams, HFM, injectors, and software. We have found this combination of upgrades and software to yield the best results for producing top-end power. Note: using the M50 manifold shifts the power band higher in the RPM range. This is GREAT for track cars but not well-suited for street cars where the OBDII manifold works best to produce torque at lower RPM. Presently, we do not have software tuned for only the M50 manifold without cams or the HFM upgrade. Check our website again for future product releases. We currently offer custom mapped Shark Injectors for these packages:
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/stock OBDII manifold
E36 M3 - 3.5" HFM/24lb injectors/Schrick cams/M50 manifold

Optional fuel rail cover. The standard M52/S52 fuel rail cover is too tall for the M50 manifold and does not have the proper brackets for securing it in place over the fuel rail. We can correctly modify the stock M52 fuel rail cover for you to complete the factory appearance.

Download PDF Installation Instructions

This is a replacement air filter for your Dinan air intake. Replace your dirty, damaged, or lost filter to restore the performance you expect of Dinan and your BMW.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

OEM BMW crank case vent valve part number: 11151703484.

A bad DISA valve can cause a variety of issues, from a loud racket in the engine bay, hesitation at low rpm and a rough idle with lean codes.

If the valve is making a loud noise, we recommend replacing it as soon as possible. It is possible for the pin holding the flap to be sucked into the motor causing serious damage.

Very easy to replace, just need to undo the 4 bolts holding it to the intake manifold.

Includes new mounting hardware

The ultimate intake for the E46 M3, made from prepeg carbon fiber in the same weave as the Genuine airbox for a OE look. The Karbonius airbox also features carbon fiber intake trumpets in place of the factory's plastic trumps, and are finished to a ultra smooth finish for perfect airflow.

OPTIONAL ESS E46 M3 Alpha-N E-Flash ECU Tuning Software

The plastic hoses and oil separator can crack or become faulty, leading to vacuum leaks or oil leaks. This is caused by the stress the plastic components are exposed to during heating and cooling cycles, especially if the vehicle is not brought up to operating temperature during driving in cold weather climates.

This kit includes the needed hoses, oil separator, mounting grommet, and hardware.

Fits the following BMWs:
1996-1999 E36 BMW 323is/ic 328i/is/ic M3
1996-08/1998 E39 BMW 528i
1996-2000 Z3 BMW with M52/S52

Ensure your vehicle maintains optimal fuel efficiency and performance by swiftly replacing the Mass Airflow Sensor (MAF). This crucial component regulates fuel delivery through injectors based on incoming air volume. A faulty MAF can significantly impact gas mileage and overall performance.

Gradual MAF failure often results in reduced fuel efficiency and performance degradation. Complete failure may cause stuttering and stalling, forcing the vehicle into a limp mode. A simple diagnostic test involves unplugging the MAF connector before starting the car; improved idling indicates a faulty MAF requiring replacement.

Failure to replace the MAF leads to excessive fuel consumption and inefficient burning, adversely affecting fuel economy. Opt for a Genuine BMW MAF replacement to ensure stock-quality performance and enhance vehicle efficiency.

Upgrade your BMW E36 Z3 M52 S52 engine's air intake system with the Turner Motorsport Genuine Air Intake Hose. This crucial hose, situated between the mass airflow sensor and the throttle body inlet, is prone to cracking over time, leading to lean conditions and decreased engine performance.

• Genuine BMW part ensures quality and compatibility
• Prevents air leaks and maintains proper air-fuel mixture
• Enhances engine performance and throttle response
• Direct replacement for easy installation

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

A silicone intake boot offers many advantages over the stock accordion-style boot:

• perfectly smooth interior surface (less turbulent air)
• stronger and more durable (no rips to create vaccum leaks)
• will not attract or radiate heat to the engine bay

This intake boot is the larger 3.5" size to replace the adapter and stock intake boot and delete ASC+T on E36 M3 and MZ3 models. Normally deleting ASC will require a new boot from a non-ASC model but this boot is stronger with a small power gain as a bonus. And you don't need the HFM adapter used with most HFM kits. The Mishimoto E36 boot has a perfectly smooth interior finish with no sharp angles or other obstacles for the intake air to be slowed by. Installing this boot assumes your car either does not have traction control (ASC), or you will be removing it from your car. Removing ASC is a great way to decrease intake restriction, and this intake boot is perfect for this upgrade.

This boot has two ports to work on early and late E36 models. Early cars have vaccum and the crankcase vent hoses entering the intake boot. Later models only have the vaccum hose (the crankcase vent empties into the oil dipstick. We offer an intake boot plug for the later models to plug one of these holes. You can add one from the options below.

Choose from black, blue, or red silicone.

This Mishimoto silicone intake boot fits the following BMWs: 
1995-1999 E36 M3 3.0 & 3.2 (with ASC delete) 
1998-2000 MZ3 M Roadster/Coupe (S52 engine)