Home
Cooling

BMW Cooling System Parts & Accessories for BMW Z3 (1996-2002)

Clear BMW chassis

The cooling system is arguably the weakest point in numerous BMWs. If you drive an aging BMW or plan on taking your car to the track like we do, we recommend beefing up your cooling system before going to the track. Generally, the main components in your cooling system that are prone to failure include the following: expansion tank, factory hoses, water pump, thermostat, fan (especially if your vehicle comes factory with a clutch fan), and radiator. Factory BMW expansion tanks are plastic and prone to either breaking off at connection points or combusting. As factory rubber hoses age they either crack or break over time - we offer silicone cooling hose upgrades for most applications to avoid future failures. If you have an older vehicle, your water pump likely comes from the factory with a plastic impeller - we offer upgraded water pumps with metal impellers that are far more reliable. Newer model BMWs utilize electric water pumps - BMW spent millions of dollars engineering these water pumps, but they fail so often that we recommend replacing at 60,000 mile service intervals to avoid being stranded on the side of the road. In terms of thermostats, we offer various upgraded thermostats for racing applications. If your BMW utilizes a clutch fan from the factory, we have several options available in terms of universal electric fans - we recommend replacing these to avoid sending brittle plastic fan blades through your hood. For radiators, we recommend swapping out your radiator for one that does not use plastic connection points like your factory radiator.

Sub-Categories

Sort By:

Turner Motorsport HD Aluminum Coolant Expansion Tank Kit - M50/M52/S5...

For vehicles produced before 09/1998

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9998526

Part#: 008348LA01BKT

In Stock

Sale - Save 20% $ 423.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.19 USD

Add to Wish List

Qty

Sale - Save 20%

$ 423.99

This product was last offered at the strikethrough price on
06-14-2026

$ 339.19 USD

Add to Wish List

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E36 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install,

If your E36 needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Aluminum Coolant Expansion Tank Features:

- Maintains stock coolant capacity and expansion volume

- Designed to maintain OE coolant elevation, preventing air pockets

- Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading

- Carefully designed bleed passage prevents the introduction of air as the engine cools

- Turner engraved internal fill level

- TIG welded 5052 aluminum construction

- All bungs are machined to fit factory hose ends

Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

Show More Show Less

OEM Style Hose Clamps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338927

Part#: HOSE-CLAMPS

In Stock

Sale - Save 3% $ 3.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 3.87 USD

Add to Wish List

Sale - Save 3%

$ 3.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 3.87 USD

Add to Wish List

Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

Show More Show Less

Schwaben Coolant Refill/Air Purge Tool

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:362940

Part#: 003466SCH01

In Stock

Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-02-2026

$ 87.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 109.99

This product was last offered at the strikethrough price on
05-02-2026

$ 87.99 USD

Add to Wish List

When it comes to BMW's we all know the weak point is commonly in the cooling system, many models proving hard to bleed the air pockets out after the refresh. The coolant refill tool solves this problem, ensuring that you get an air pocket free fill. The entire task is as simple as draining the system like normal, reinstalling the drain plugs and hooking the tool up to your refill location. The reason this tool works so well is due to the venturi valve, it converts air pressure from the compressor to vacuum inside the cooling system, then with a twist of a valve sucks coolant right into the system using the vacuum pressure.

Show More Show Less

Coolant Vacuum Purge & Refill Tool Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:402498

Part#: 024948SCH01A

In Stock

Sale - Save 25% $ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 86.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 86.99 USD

Add to Wish List

The Schwaben Coolant Vacuum Fill Tool ensures no air pockets get into your cooling system while you're replacing your coolant - intended for use to refill your cooling system, not for removal. Can be used with Schwaben fluid extractors or with shop air - standard air compressor with a minimum rating of 90 PSI (6.2 bar). Includes all fittings and adapters necessary for use, with a molded storage case to keep your Schwaben Vacuum Fill Tool pristine for future use.

Show More Show Less

Schwaben Water Pump Pulley Holder for Removal of Fan Clutch

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:362357

Part#: 001170SCH01A

In Stock

Sale - Save 25% $ 43.99

This product was last offered at the strikethrough price on
05-02-2026

$ 32.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 43.99

This product was last offered at the strikethrough price on
05-02-2026

$ 32.99 USD

Add to Wish List

Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.

Show More Show Less

Schwaben Locking Hose Clamp Pliers

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:377131

Part#: 004170SCH01A

In Stock

Sale - Save 55% $ 63.99

This product was last offered at the strikethrough price on
05-02-2026

$ 28.79 USD

Add to Wish List

Qty

Sale - Save 55%

$ 63.99

This product was last offered at the strikethrough price on
05-02-2026

$ 28.79 USD

Add to Wish List

These pliers feature a spring loaded clamp with a 24" cable and will lock onto the clamp and hold open for easy removal. These pliers are designed to remove metal or plastic self-tightening hose clamps with diameters from 11/16" to 2-1/2" ( 18 to 54mm).

Show More Show Less

Radiator Pressure Tester Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:391482

Part#: 014710SCH01A

Ships on Jul 30, 2026

Sale - Save 25% $ 205.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 154.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 205.99

This product was last offered at the strikethrough price on
05-03-2026

$ 154.49 USD

Add to Wish List

Are you refreshing your coolant system or having issues with coolant loss? An easy way to test your system for leaks and ensure you're able to maintain pressure without coolant loss is the Schwaben Cooling System Pressure Tester Kit.

Show More Show Less

Schwaben Long-Reach 32mm Open End Fan Clutch Wrench

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378938

Part#: 007701SCH01A

In Stock

Sale - Save 25% $ 42.99

This product was last offered at the strikethrough price on
05-02-2026

$ 32.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 42.99

This product was last offered at the strikethrough price on
05-02-2026

$ 32.24 USD

Add to Wish List

This tool was specifically designed for the tight clearances needed to remove most BMW fan clutches. Its slim design lets it fit into tight areas, and the extra-long length is ideal for fan shroud clearance.

Show More Show Less

Schwaben Locking Hose Pinch-Off Pliers

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:379950

Part#: 009787SCH01A

In Stock

Sale - Save 15% $ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 39.99

This product was last offered at the strikethrough price on
05-02-2026

$ 33.99 USD

Add to Wish List

Schwaben Locking Hose Pinch-Off Pliers have adequate clamping force to effectively seal large or pressurized cooling system hoses. These pliers are ideal for clamping shut most hoses, ensuring reliability in your automotive tasks. With swivel jaws, they provide even clamping force, making them a versatile tool for various applications.

Adequate clamping force for large or pressurized hoses
Ideal for clamping shut most hoses
Swivel jaws ensure even clamping force
Versatile tool for automotive maintenance

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. For more information, visit http://www.p65warnings.ca.gov.

Show More Show Less

Schwaben & Bav Auto Water Pump And Fan Clutch Tool Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:375872

Part#: 001170SCH01AKT

In Stock

Sale - Save 25% $ 65.99

This product was last offered at the strikethrough price on
05-02-2026

$ 49.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 65.99

This product was last offered at the strikethrough price on
05-02-2026

$ 49.49 USD

Add to Wish List

Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.

Show More Show Less

Schwaben 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:361021

Part#: DO-3236

In Stock

Sale - Save 25% $ 25.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 25.99

This product was last offered at the strikethrough price on
05-02-2026

$ 19.49 USD

Add to Wish List

Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport tech's use!

Features:

Made of Chrome Vanadium Steel for strength
32/36mm open end sides

Show More Show Less

Schwaben Radiator/ Intercooler Fin Comb

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:384260

Part#: 015326SCH01A

In Stock

Sale - Save 29% $ 20.99

This product was last offered at the strikethrough price on
05-02-2026

$ 14.99 USD

Add to Wish List

Qty

Sale - Save 29%

$ 20.99

This product was last offered at the strikethrough price on
05-02-2026

$ 14.99 USD

Add to Wish List

Straighten bent fins in heat exchangers like radiators, condensers, and intercoolers obstruct air flow and reduce heat transfer. Paper-thin fins are easily bent, even by slight pressure.

Select Vehicle

Purpose

Category

Home

Cooling

Brand

View All Brands

Price

Special Offers

Shipping