Prevent bothersome transmission oil leaks with a new pan gasket. Install it during routine transmission maintenance or to protect your transmission from damage caused by fluid loss.
Comes with pre-installed bearing, seal and axle nut Wheel bearings support the axles, road wheels, and vehicle weight. Loose steering, a growling noise from the wheels at road speed; abnormal tire wear; and noise while turning, are a few of the warning signs that you have one or more bad wheel bearings. Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles.
Show More Show Less
This is the Meyle brand rear axle boot kit for the interior CV joint. The kit includes the boot, clip, clamp and grease. This boot can be used on the outer CV joint.
This item fits the following BMWs: 1989-1991 E30 BMW 318is 1987-1991 E30 BMW 325i 325ic 325is M3 1991-1995 E36 BMW 325i 325is 325ic 1996-1998 E36 BMW 328i - Only for Automatic Transmission 1996-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Show More Show Less
Keep your BMW running at its best with the reliability of Meyle. Ideal for daily drivers, weekend cruisers, or performance builds, this accessory belt is the smart choice for dependable engine operation.
Show More Show Less
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately transmission replacement.
Show More Show Less
Used to tighten the A/C drive belt. The A/C drive belt is tightened by a separate belt tensioner. If you notice yours is worn at your next belt service, replace it with a new part.
A high-quality, OE-style replacement serpentine belt designed to deliver reliable power to critical engine components, ensuring optimal performance and durability.
MEYLE-ORIGINAL: True to OE spark plug boot Should be replaced each time you replace the spark plugs Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles. Comparable OE Cross Reference - 12139067831
Show More Show Less
Wheel bearings can need replaced for a number of different reasons. On some vehicles, when removing the front axles, it is required that you also replace the wheel bearings before reinstallation. If the wheel turns with a gritty feel or there is a loud metal to metal noise when on the road, your bearings have failed.
Show More Show Less
Wheel bearings support the axles, road wheels, and vehicle weight. Loose steering, a growling noise from the wheels at road speed; abnormal tire wear; and noise while turning, are a few of the warning signs that you have one or more bad wheel bearings. Includes bearing, cap, and circlip Wulf Gaertner Autoparts AG manufactures and markets automotive spare parts under its MEYLE brand. Since its foundation in 1958, Wulf Gaertner Autoparts has been an owner-operated, unlisted family business on the aftermarket scene. Since 1995, Wulf Gaertner Autoparts AG has been manufacturing and trading under its MEYLE brand. They pride themselves on top-grade quality-tested spare parts for passenger cars, vans and commercial vehicles.
Show More Show Less
Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil.
Show More Show Less
This direct-fit Meyle oxygen sensor plugs directly into your factory connector. Fits M44 engine Z3 and 3 series and M62 engine E39, E38, E31 with V8 engines. No cutting or splicing is required. A new oxygen sensor can improve driveability and lengthen engine life. This is the pre-catalytic converter oxygen sensor
Show More Show Less
Changing the automatic transmission filter and fluid is an important maintenance task that can help ensure the longevity and optimal performance of your vehicle's transmission system. Meyle has made this process easier with their Automatic Transmission Service kits. This kit includes everything needed to perform a full transmission flush and fill, including the extra transmission fluid necessary for a proper flush. Included: 12L of Meyle's Specially Formulated Transmission Fluid 1 Replacement Filter Element Replacement Drain Plug All Necessary Hardware Not sure if this kit is right for your BMW? Contact our sales staff with your VIN to confirm the exact part you need.
Show More Show Less
Symptoms of failed control arm bushings commonly include a loose and imprecise feel in the steering, excessive shaking and vibration through the steering that increases with speed and braking, and squeaking, whining or grinding from the front when turning at slow speeds.
Show More Show Less
If the sway bar links are broken or worn, the system doesn't work as it should. Replace your end links with one from Meyle and get all the performance characteristics back. New end links help you take turns better with less body roll. A great way to refresh your suspension.
Show More Show Less
Wheel bearings may require replacement for various reasons. On some vehicles, removing the front axles necessitates replacing the wheel bearings before reinstallation. Signs of failure include a gritty feel when rotating the wheel or loud metal-to-metal noises while driving. Modern wheel bearings often need to be pressed into place. If this applies to your vehicle, specialized tools like a shop press may be required for installation. Be sure to verify the tools and procedures needed for your wheel bearing replacement before placing your order. Fits both left and right sides.
Show More Show Less
