Search | Turner Motorsport

BMW B58 Oil Filter Housing With Filter

10X Entries Into Our F80 M3 Sweepstakes

T#:8677184

Part#: 11428583895

In Stock

Sale - Save 27% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 149.00 USD

Add to Wish List

Qty

Sale - Save 27%

$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 149.00 USD

Add to Wish List

Includes housing, gasket, filter and cap. A common cause of intermittent oil leaks on the BMW, the oil filter housing is an extremely complex part. If leaks begin to occur, the only solution is replacement. Losing oil can have dramatically bad consequences. If left unattended, running on low oil levels can cause premature wear in your engine, or worse yet, cause catastrophic failure. This filter housing also includes the caps and seals to make installation easy with all compatible parts included. Don't take a chance on losing oil. Replace your oil filter housing and seal everything back up!

Oil Filter Housing With Filter H811H

5X Entries Into Our F80 M3 Sweepstakes
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:39497971

Part#: 11428583895

In Stock

$ 208.99 USD

Add to Wish List

Qty

$ 208.99 USD

Add to Wish List

Oil Filter Housing With Filter

T#:384694

Part#: 11428583895

In Stock

5% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

Qty

5% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD

Add to Wish List

OEM Febi Oil Filter Housing - Gen1 B58

T#:47164988

Part#: 11428583895

In Stock

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

A notorious culprit behind those annoying, intermittent oil leaks on BMW engines, the oil filter housing is a surprisingly intricate piece of hardware. Once it starts seeping, there’s no patching it — replacement is the only proper fix. Upgrade to this Febi unit and keep every drop of oil right where it belongs: circulating through your engine, not decorating your driveway. Oil loss is nothing to gamble with. Low oil levels can fast-track internal wear or, in the worst cases, lead to full-blown engine failure. This Febi housing comes complete with new caps and seals, giving you a smooth, straightforward install with all the correct components included. Don’t risk running your engine dry — refresh your oil filter housing and button up your lubrication system the right way.

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...

T#:43378539

Part#: B58G1OFH

In Stock

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Rein Aluminum Oil Filter Housing - BMW B58

2X Entries Into Our F80 M3 Sweepstakes

T#:49404665

Part#: 11428583901

In Stock

$ 450.00 USD

Add to Wish List

Qty

$ 450.00 USD

Add to Wish List

Upgraded Aluminum Oil Filter Housing With Filter

10X Entries Into Our F80 M3 Sweepstakes

T#:45244553

Part#: 11428583895AL

In Stock

Sale - Save 28% $ 275.99

This product was last offered at the strikethrough price on
05-03-2026

$ 199.99 USD

Add to Wish List

Qty

Sale - Save 28%

$ 275.99

This product was last offered at the strikethrough price on
05-03-2026

$ 199.99 USD

Add to Wish List

Ditch the failure-prone plastic housing with this upgraded aluminum oil filter housing, built for strength, reliability, and peace of mind.

The factory plastic housing is a well-known weak point and a common source of oil leaks on BMW B58 engines. Once leaks develop, replacement is the only solution. Left unchecked, even minor oil loss can lead to premature engine wear, or in the worst cases, catastrophic failure.

This upgraded housing not only solves the problem with a durable aluminum construction, but also comes complete with caps and seals for a straightforward, hassle-free installation.

Protect your engine from unnecessary risk, upgrade your filter housing, and ensure a leak-free, long-lasting seal.

Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:27905122

Part#: 11428583895TKT

Ships in 1-2 days

$ 544.99

This product was last offered at the strikethrough price on
10-13-2026

$ 540.99 USD

Add to Wish List

Qty

$ 540.99 USD

Add to Wish List

BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Bremmen Engine Oil Filter Housing - Includes a new cap, seals, oil cooler, and oil filter Genuine BMW Oil Cooler Mounting Hardware Genuine BMW Oil Drain Plug Gasket Elring Intake Manifold Gaskets Elring Throttle Body Gasket Bav Auto Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.

Genuine BMW Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3...

T#:27905105

Part#: 11428583895KT

Ships in 1-2 days

$ 968.99

This product was last offered at the strikethrough price on
10-13-2026

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

BMW's B58 engine has been very successful and has proved to be a reliable powerplant that is highly capable of producing some crazy power figures. Unfortunately, in true BMW fashion, the B58 engine does have a few problems that can become serious issues if not addressed quickly. One of these issues is the oil filter housing cracking and leaking engine oil and/or coolant. BMW chose to construct the oil filter housing out of plastic and the housing tends to split if the cap is tightened too tight or even just over time as the plastic becomes brittle from numerous heat cycles. Another common failure point is the multiple gaskets that seal the housing to the engine block and between the housing and the engine oil cooler. when these seals fail, you will notice coolant and/or oil loss, or even the mixing of engine oil with coolant. There is also the possibility of your oil filter collapsing inside of the filter housing and preventing proper oil filtration and flow, sometimes clogging the small oil channels in your filter housing as the oil filter begins to fall apart. Though this is more common with vehicles that see extended oil change intervals, such as 12K+ mile oil changes, we have seen some failures as soon as 5,000 miles after an oil change! Whatever the cause may be, the solution is almost always the same, replacement of the whole oil filter housing. We have put together a kit including the basic components needed to replace your oil filter housing and get your BMW back on the road! Included: Genuine BMW Engine Oil Filter Housing - Includes a new cap, seals, and oil filter (oil cooler not included and must be reused or purchased new - see BMW # 11428583901) Oil Cooler Mounting Hardware Oil Drain Plug Gasket Intake Manifold Gaskets Throttle Body Gasket Transmission Fill Plug (For Automatic models) Genuine BMW Installation Hardware Not included in this kit are the fluids that will need to be replaced or topped off after the installation of your new oil filter housing, including engine oil, G48 or HT-12 coolant (depending on what your BMW came with from the factory), and automatic transmission fluid for models with the ZF 8HP transmission.

Oil Filter Housing Replacement Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:48850071

Part#: 11428583895MKT

Ships in 1-2 days

Sale - Save 1% $ 601.99

This product was last offered at the strikethrough price on
05-03-2026

$ 594.20 USD

Add to Wish List

Qty

Sale - Save 1%

$ 601.99

This product was last offered at the strikethrough price on
05-03-2026

$ 594.20 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Showing 10 results for "11428583895"

BMW B58 Oil Filter Housing With Filter

Oil Filter Housing With Filter H811H

Oil Filter Housing With Filter

OEM Febi Oil Filter Housing - Gen1 B58

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...

Rein Aluminum Oil Filter Housing - BMW B58

Upgraded Aluminum Oil Filter Housing With Filter

Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3.0L ...

Genuine BMW Oil Filter Housing Replacement Kit - BMW F22/23 F3X B58 3...

Oil Filter Housing Replacement Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results