click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
  3. Performance Flash Software, 2005+ Models
  4. Sprint Booster Drive-by-Wire Module
  5. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. E30 M3 S14 Engine Parts
  13. External Engine Parts
  14. Drive Belts & V-Belts
  15. Gaskets, Gasket Sets, Seals, & O-Rings
  16. Factory-Spec Replacement Turbos and Kits
  17. Crankcase Vent, PCV, and Oil Separator Systems
  18. Turbo Upgrades and Kits
  19. Motor Mounts
  20. Electrical Sensors, Switches, & Relays
  21. Ignition Parts
  22. Alternator & Alternator Parts
  23. Starter Motors & Starter Parts
  24. Fuel System Parts
  25. Internal Engine Parts
  26. Cylinder Head Parts & Head Bolts
  27. VANOS Units & Parts
  28. Rod Bearing Kits
  29. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. OEM Replacement Mufflers and Exhaust Systems
  10. Exhaust System Upgrades
  11. Exhaust Muffler Tips
  12. Catalytic Converters
  13. Oxygen Sensor - O2 Sensors
  14. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Replacement Cone Air Filters (for Cold Air Intakes)
  9. Intake Cleaning & Recharging Kits
  10. Intake Manifold Upgrades
  11. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  12. BOV, Chargepipe, and Intercooler Upgrade Kits
  13. Mass Air Sensor & Air Flow Meters
  14. Intake Boots & Hoses
  15. Throttle Body Parts
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Distributor Caps & Rotors
  8. Ignition Coils
  9. Ignition Wires / Spark Plug Wires
  10. Spark Plugs
  11. Bentley Repair / Service Manuals
  12. Service Reset Tools & Fault Code Readers
  13. Anti-Freeze and Coolant
  14. Engine Oils - Genuine BMW and OEM
  15. Power Steering and Hydraulic Fluids
  16. Transmission and Gear Oil - Genuine BMW and OEM
  17. MOTUL Engine Oil and Gear Lubricants
  18. Red Line Oil & Fluids
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Dinan Coilover Spring Kits
  7. Turner / H&R Height Adjustable Spring Sets
  8. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  9. H&R Coil Over Suspensions
  10. KW Coil Over Suspensions
  11. Moton Coil Overs & Race Shocks
  12. ST Suspension Coilover Kits
  13. Turner Motorsport TrackSport Coil-Over Suspension Kits
  14. Turner Motorsport Racing Suspension Kits
  15. Chassis Reinforcement Kits & Parts
  16. Sway Bar Kits
  17. Sway Bar Links & Sway Bar Parts
  18. Camber / Caster Kits
  19. Strut Braces & Stress Bars
  20. Control Arm Replacements & Upgrades
  21. Suspension Bushings & Mounts
  22. Wheel Bearings & Hub Assemblies
  23. Steering Racks & Power Steering Pumps
  24. Tie Rods & Steering Parts
  25. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. D Force Flow Formed Alloy Wheels
  6. Dinan Performance Wheels
  7. Original BMW Wheels and Wheel Upgrades
  8. Turner Motorsport Wheel Spacers
  9. H&R Wheel Spacers
  10. Wheel Bolts, Wheel Studs and Nuts
  11. Wheel Emblems, Caps, and Accessories
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2014+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2014+
  7. (F36) 4-Series Gran Coupe 2014+
  8. (F33) 4-Series Convertible 2014+
  9. (F33) 4-Series Convertible 2014+
  10. (F36) 4-Series Gran Coupe 2014+
  11. (F36) 4-Series Gran Coupe 2014+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW Sway Bar Kits

BMW Sway Bar Kits The next step in tuning your car's handling - after shocks/springs and camber plates - should be a set of swaybars. Using larger front and rear sway bars will give your car better/quicker turn-in and less bodyroll in corners. These bars replace the existing sway bars on the car for a clean and simple upgrade with very little downside. Sway bars should be matched with your springs/shocks to maintain a proper handling balance. In some cases only a front or rear bar is needed to positively change the balance and make the car more neutral. We sell sway bar kits from H&R, Racing Dynamics, OE BMW upgrades, and even some of our own designs. Swaybars are sold with new bushings. New links and other hardware are strongly recommended.
For accurate results, specify your model below.
AFe Control Sway Bar Set -- F30 335i 340i

The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear 2-way adjustable, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

Product Features:

  • CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
  • 2 Position Adjustable, CNC Machined, TIG Welded Bar Ends
  • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
  • 2 Stage Tangerine Orange, Powder-coated Finish
  • Direct Fit Installation, Requires No Modifications

Vehicle Fitment:

2012+ F30 BMW 335i 340i

Part #: 440X503002-N
Price: $695.00 (USD) 
$834.00 (17% off MSRP)
Quantity:   
H&R Front Sway Bar - E82/E88 1 Series (135i & 128i) 27mm FRONT sway bar / swaybar for 1 series, including 128i and 135i coupe and convertible.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2008+ E82 BMW 128i 135i
  • Part #: 70187
    Price: $278.95 (USD) 
    Quantity:   
    M3 Front Sway Bar Upgrade - E82, E9X The stock E93 M3 front 28mm swaybar can be used on all of the other E90/E92 and E82 cars as a mild upgrade to reduce bodyroll, improve handling, and get quicker turn-in. This is a direct upgrade for all E82/E88/E9X (not xi AWD) when used with the bar, bushings, and hardware.

    stock E90/E92 M3 sway bar size = 26.5mm
    stock E9X non-M3 sway bar size = 26.5-23.0mm
    stock E93 M3 sway bar size = 28-24mm


    The front anti-roll bar is one of the keys to improving handling feel for the E82 and E9X. The larger bar is stiffer, which helps control the front tires and keep them in contact with the road. The front tires will bite harder into the turn, giving you more front grip. You'll see improved turn-in response, less understeer, and less body roll. This is one the best street suspension upgrades you can make for the E82/E9X cars. And there's almost no change in ride comfort or noise. Installation is simple for the front sway bar and takes about one hour. The bushings are a tight compression fit to the bar - remember to use lots of lubricant to get them to snap into place.

    Required parts for installation on non-E93 M3 models:
    2 x 31352283967 - Swaybar bushings (bottom)
    2 x 31352283968 - Swaybar bushings (top)
    2 x 31352283037 - Mounting brackets
    Add these parts to your swaybar from the Options below.

    The E93 M3 28mm Swaybar Upgrade is for the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2006-2012 E91 BMW 328i - Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    2008-2013 E93 BMW M3 - Convertible (not an upgrade, replacement part only)
    Part #: 31352283965
    Price: $363.75 (USD) 
    Free Shipping Free Shipping
    Front AFe Control Sway Bar  --  F80 F82 F83 F87 BMW

    The aFe Control Front Sway Bar is a great upgrade option for your high performance BMW. Its tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bending and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 32mm Front
    • CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets
    • Direct Fit Installation, Requires No Modifications
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications

    Vehicle Fitment:

    2016+ F87 BMW M2

    2015+ F80 BMW M3

    2014+ F82/F83 BMW M4

    Part #: 440-503001FN
    Price: $395.00 (USD) 
    Quantity:   
    H&R Front Sway Bar - E89 Z4 3.0i, 3.0si, 35i 27mm non adjustable bushings included;

    H&R Sport sway bar / swaybar / swaybars are crafted from a special (hf) 50CrV4 steel alloy—the highest tensile strength available. The quality of the material and design guarantees smooth transitional sway bar function—decreasing the feedback response time—and increases stiffness over stock. H&R Sport Sway Bars improve a vehicle’s lateral stability and cornerning grip, while reducing body roll.

    H&R Sport Sway Bars are precision engineered—designed and manufactured to be strong, resilient, and durable. Adhering to the same manufacturing philosophy as H&R’s world-renowned springs, H&R Sport Sway Bar design and production receives significant attention to detail and commitment. Each sway bar is cold-formed and heat-treated, with forged seamless bar ends. H&R shot-peens the sway bars to increase durability and check for dimensional correctness. At H&R’s ISO9001 certified manufacturing facility in Germany, production is completed in-house and each sway bar must pass a series of rigorous quality control tests to earn H&R’s approval and yours.

    Being 100% German made means a commitment to doing it right—giving you the best quality product.

    This item fits the following BMWs:
    2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: 70987
    Price: $278.95 (USD) 
    Quantity:   
    F87 M2, F8X M3/M4 Dinan Tubular Adjustable Sway Bar Set

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F8X M3/M4 and F87 M2 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

    Dinan F8X Sway Bar Specs:
    F: 32mm, hollow, 4-position adjustable, adjustable links, urethane bushings, and brackets included
    R: 24mm, hollow, 3-position adjustable, urethane bushings, and brackets included

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This set is worth 2 points towards your Dinan badge.

    This item fits the following BMWs:
    2015+ F87 BMW M2
    2015+ F80 BMW M3 - Sedan
    2015+ F82 F83 BMW M4 - Coupe, Convertible

    Part #: D120-0605
    Price: $926.00 (USD) 
    Quantity:   
    E9X M3 Turner Motorsport Racing Blade-Style Front Sway Bar Kit

    Racers no longer have to struggle with sourcing the ultimate M3 front sway bar - this is it. The infinitely adjustable finishing touch to a highly advanced racing suspension package.

    Throughout our years of racing the E92 M3 we have experimented with many different suspension configurations. All this development has allowed us to design and manufacture exactly what the E9X M3 needs for a front sway bar. Our blade type infinitely adjustable bar is intended for track / race cars with a dry-sump oiling system. It will not fit street cars due to interference between the bar and the bottom of the stock oil pan (dry sump systems allow a much thinner oil pan).

    This bar is 1.25"x.95" diameter steel tube with a minimum of bends and adjustable blade-style ends. It is very rigid yet tuned perfectly to work with the rest of our suspension. The bar is solidly mounted using aluminum blocks with a rubber isolating liner. The front subframe/engine cradle must be modified for use with these brackets to allow the bar to clear other suspension components. You can modify your existing subframe or purchase one of our pre-modified pieces and exchange your original ($627.07 core charge applies). Our modified subframes also include reinforcing gusseting for the lower control arm mounts and other tricks from our racing department.

    For those unfamiliar with blade-style bars, the angle and orientation of the blade determines its torsional resistance. The flatter and more perpendicular to the road the more it will flex. Turning the blade on its side will make it more resitant to twisting and bending. This is the setup our own race team specified after years of racing - and winning - with the E92 M3 with driver feedback from Bill Auberlen, Joey Hand, and Boris Said.

    Racing-spec Front Sway Bar Upgrade includes:

     

    • tubular bar with serviceable end-bearings
    • blade-style ends
    • adjustable sway bar links
    • bar mounting blocks with collars and liners
    • all sway bar hardware
    • optional modified front subframe
    • Requires: dry-sump oil system

      This item fits the following BMWs:
      2008-2011 E90 BMW M3 - Sedan
      2008-2013 E92 BMW M3 - Coupe

     

    Part #: TMS176973
    Price: $3836.37 (USD) 
    Free Shipping Free Shipping
    E46 Non-M ECS Tuning 27/21 Performance Sway Bar Kit

    To reduce the understeering affects of a staggered wheel setup you want a balanced set of sway bars. ECS has configured this anti-roll bar set for the non-M E46 with a 27mm adjustable front bar and a 21mm rear bar. The front is adjustable to two positions to fine-tune the handling and reduce understeer. The rear bar is fixed to retain the stock sway bar link. These anti-roll bars include urethane bushings with a reinforced inner liner that eliminates squeaks and doesn't require lubrication. The bars are powder coated for durability and good looks.

    These bars fit in the stock locations using the existing brackets and links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs (note: the rear bar is designed to only use the stock link, heavily lowered cars should not use this kit).

    The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the hole(s) furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and adjust to your liking from there. 

    This item fits the following BMWs: 
    1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

    Part #: 007277ecs01KT
    Price: $329.95 (USD) 
    Quantity:   
    E82 128i/135i Sport Rear 12mm Sway Bar This is the factory sport package rear sway bar as used on the E82 128i Sport and 135i Sport. It's a 12mm diameter which is perfect for a mild suspension upgrade, especially when using factory or mild aftermarket springs. The base 128i did not come with any rear sway bar which makes this a big upgrade (requires mounting kit, see below). The 135i had a stock 11mm rear sway bar so the effect will be less dramatic.

    On the 128i models that did not have a sport package, BMW did not install a rear sway bar. Adding one will make the car feel 'snappier' with more rear end drifting. It will be easier to get into an oversteer situation which makes this upgrade suitable for autocross or other tight cornering environments. If you are upgrading from no rear bar you will need the brackets, rear links, and hardware. We have packaged these pieces together in a kit for you - add it to your order from the options below.

    This sway bar is sold as the bar only. Bushings should be ordered separately, see below.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    Part #: 33556764424
    Price: $155.95 (USD) 
    Free Shipping Free Shipping
    on orders $200 and up
    Quantity:   
    H&R Rear Sway Bar - 20mm - F30 320i 328i 335i, F32 428i 435i, F22 228i 235i


    H&R Rear sway bar / swaybar for F30 F32 and F22 - 20mm, fixed (non-adjustable.)

     

     

    • Reduces body roll
    • Highest tensile strength available

      H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension's roll stiffness or its resistance to roll in turns while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness, giving you an unmatched level of precision and performance.

      This item fits the following BMWs:
      2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
      2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
      2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
      2014+ F22 BMW 228i M235i M235i xDrive- Coupe

     

     

    Part #: 71878
    Price: $314.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    E36 325i/328i/M3 Turner Motorsport Front/Rear 30/24 Sway Bar Upgrade As Used on Project E36 M3 From years of racing the E36 in World Challenge we have discovered the E36 favors a larger front bar without over doing the size of the rear. This is the best combination we could find to reduce body roll while making handling as neutral as possible. These are the latest generation of our popular Turner E36 swaybars, now with CNC machined ends, two adjustment positions on each bar, re-countoured bends for better clearance, and one of the largest front solid sway bars available (30mm). We couldn't find a large front sway bar that we liked so we made our own - perfect for taming that understeer! These sway bars fit all 1992-1999 BMW E36 chassis, including the E36 M3, 325i, 325is, 328i, 328is, 323is, 318i and 318is (sorry, no ti). Perfect for street use and great for competition / track applications.

    Fitment
    These bars fit in the stock locations using the original brackets and links. Our bar has been designed to use either the non-M or M3 front sway bar links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs. The rear hardware has been upgraded in our kit to a M10 sized bolt and it can be a little tricky to install on the factory end link. Contact us if you would like to have new links included with the hardware pre-installed. To avoid pre-loading the bar, it is best to leave one side un-done until the car is lowered to the ground. Never connect both links to the same bar with the car off the ground. We strongly recommend installing our Turner E36 Rear Sway Bar Reinforcement Kit at the same time as any rear bar install.

    Do I need adjustable sway bar links?
    The adjustable sway bar links ensure that there is no pre-load on the bar and that the bar has the correct clearance to other suspension components. Pre-load is when the bar is slightly stressed when it's on the car. If you have to force the links to fit the bar because it has tension then you have pre-load. Adjustable links fix all of that because you can then shorten or lengthen the link to match the installation of the bar. If you have coil overs or the car is very low, you should definitely have the adjustable links because these conditions may contribute to the pre-load situation. Adjustable front or rear links can be added from the options listed below.

    Setup
    The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the holes furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and the rear bar positioned in the soft setting. Adjust to your liking from there.

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    Part #: TMSSWAYE36M3-2
    Price: $439.95 (USD) 
    Free Shipping Free Shipping
    E39 540i Eibach Sway Bar Upgrade Kit

    After shocks and springs, your next handling upgrade should be a set of sway bars (anti-roll bars). E39 540 sway bar upgrade consists of a 28mm front bar and 18mm rear bar (non-adjustable). These bigger bars reduce body roll and keep the tire in better contact with the pavement, which helps steering and turn-in too. Larger swaybars also counteract the effects of a staggered wheel set, helping to reduce understeer. These bars include urethane bushings but new sway bar links and rear bushing brackets are recommended. Professional installation is strongly recommended.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i 540i M5

    Part #: 2054.320
    Price: $399.95 (USD) 
    Quantity:   
    Suspension Techniques Sway Bar Set for E30 3 Series This kit includes everything for installation including a 22mm front bar, 19mm adjustable rear bar, polyurethane bushings, adjustable rear links and full hardware kit. We have been selling this kit since 1993 and we still love it. Perfect for street or track use.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
    Part #: 52010
    Price: $382.48 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E36 2 way adjustable 21mm rear sway bar / swaybar for E36 non M cars. Includes bushings.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
  • Part #: 71824
    Price: $222.95 (USD) 
    Quantity:   
    aFe Control Sway Bar Set  --  F80 F82 F83 F87 BMW

    The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
    • CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets
    • Direct Fit Installation, Requires No Modifications
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications

    Vehicle Fitment:

    2016+ F87 BMW M2

    2015+ F80 BMW M3

    2014+ F82/F83 BMW M4

    Part #: 440-503001-N
    Price: $695.00 (USD) 
    Quantity:   
    H&R Rear Sway Bar - Z3 - 19mm

    Z3 19mm H&R Rear sway bar / swaybar, fully adjustable. 
     

    • Reduces body roll
    • Highest tensile strength available

      H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension�s roll stiffness�or its resistance to roll in turns�while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness�giving you an unmatched level of precision and performance.

      This item fits the following BMWs:
      1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    Part #: 71754
    Price: $199.95 (USD) 
    E82/E9X ECS Tuning 28/15 Performance Sway Bar Kit

    To reduce the understeering affects of a staggered wheel setup you want a balanced set of sway bars. ECS has configured this anti-roll bar set for E82 1-series and E9X 3-series with a 28mm front bar and a 15mm rear bar. This kit is designed to help reduce the amount of body roll when cornering and enhance response when turning. These anti-roll bars include urethane bushings with a reinforced inner liner that eliminates squeaks and doesn't require lubrication. The bars are powder coated for durability and good looks.

    These bars fit in the stock locations using the existing brackets and links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs.

    This item fits the following BMWs: 
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    Part #: 007278ecsKT1
    Price: $369.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E89 Z4 3.0, 3.0si, 35i 21mm Adjustable REAR sway bar / swaybar for E89 Z4.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
  • Part #: 71987
    Price: $238.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E85 Z4 21mm Rear sway bar / swaybar with urethane/Teflon bushings. 19mm diameter. Adjustment positions at the bar end with the original sway bar link.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si
  • Part #: 71276
    Price: $182.95 (USD) 
    Quantity:   
    F22, F3X RWD Dinan Adjustable Sway Bar Set

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F22 and F30-F36 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Both front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

    Dinan F3X Sway Bar Specs:
    F: 28mm, hollow, 3-position adjustable, urethane bushings and brackets included
    R: 19mm, hollow, 3-position adjustable, urethane bushings and brackets included

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

    This item fits the following BMWs:
    2014+ F22 F23 BMW 228i M235i
    2012+ F30 BMW 320i 328i 335i - Sedan
    2012+ F32 BMW 428i 435i - Coupe
    2013+ F33 BMW 428i 435i - Convertible
    2012+ F36 BMW 428i 435i - GranCoupe

    Part #: D120-0585
    Price: $823.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    H&R Rear Sway Bar - E82/E88 1 Series (135i & 128i)

    20mm REAR sway bar / swaybar for 1 series, including 128i and 135i coupe and convertible.
     

    • Reduces body roll
    • Highest tensile strength available

      H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspensions roll stiffness or its resistance to roll in turns while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends giving you an unmatched level of precision and performance.

      This item fits the following BMWs:
      2008+ E82 BMW 128i 135i
    Part #: 71187
    Price: $238.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - Z3 M Coupe / Roadster H&R sway bar / swaybar for M Coupe / Roadster - 28mm, adjustable front.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1997-2002 Z3 BMW M Roadster M Roadster
  • Part #: 70520
    Price: $278.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - 25mm - F80 M3, F82 M4


    H&R Rear sway bar / swaybar for F80/F82 - 25mm, fixed (non-adjustable.)

     

     

    • Reduces body roll
    • Highest tensile strength available

      H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension?s roll stiffness?or its resistance to roll in turns?while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness?giving you an unmatched level of precision and performance.

      This item fits the following BMWs:
      2015+ F80 BMW M3
      2015+ F82 BMW M4
    • 2016+ F87 BMW M2

     

     

    Part #: 71474
    Price: $281.40 (USD) 
    $389.95
    Limited Qty Sale
    Quantity:   
    E9X M3 Modified Subframe For Use With Turner Racing Front Sway Bar

    Fitment of the ultimate M3 front sway bar (the Turner Motorsport Racing-Blade Style, that is) requires modifications to be made to the front subframe for proper clearance. We've taken half of the effort out by offering a modified subframe for ease of installation. By utilizing this subframe in concert with our racing sway bar kit and a dry sump oiling system, your track or race car is a step closer to a dialed-in front end.

    This subframe includes reinforcing gusseting for the lower control arm mounts and other improvements from our racing department. 

    See T340455 for this subframe with our sway bar kit.

    $627.07 core charge is included in this price and is refunded on receipt of your original subframe.

    Part #: tga2283440kt
    Price: $1441.36 (USD) 
    Quantity:   
    Racing Dynamics Sway Bar Set - E34 525i, 535i & M5 These adjustable sway bars are larger than the stock, original BMW bars. They allow you to fine-tune the handling of your car using adjustable settings on both the front and rear bars. This kit features a 3 way adjustable 27mm front bar and a two way adjustable 19mm rear bar. These are significantly bigger than the stock E34 non-sport sway bars and slightly larger than an E34 sport or E34 M5 set. They are currently the largest sway bar set currently on the market. The complete kit also includes polyurethane bushings and new adjustable rear sway bar links (original links are used in the front).

    Swaybar Set 1968134010 fits the following BMWs:
    1989-1995 E34 BMW 525i 535i M5
    Part #: 1968134010
    Price: $479.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - 28mm - F30 335i - F32 435i - F22 M235i

    28mm 2 way adjustable bar; bushings included.
     

    • Reduces body roll
    • Highest tensile strength available

      H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension's roll stiffness or its resistance to roll in turns while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness giving you an unmatched level of precision and performance.

      This item fits the following BMWs:
      2012+ F30 BMW 335i - Sedan
      2013+ F32 BMW 435i - Coupe
      2014+ F22 BMW M235i - Coupe
    Part #: 70878-2
    Price: $399.95 (USD) 
    Quantity:   
    F10 M5, F06 M6 GC, F13 M6 Front Competition Package Sway Bar As Used on the Turner F13 M6
    This is the front swaybar from the Competition Package on the F10 M5, F13 M6, F06 M6 Gran Coupe. It's stiffer than the standard M5/M6 front sway bar so the car handles with less bodyroll and crisper and sharper steering input. This is the factory BMW Competition Package swaybar and includes new rubber bushings. It fits with cars not equipped with Dynamic Drive/active swaybars.

    This item fits the following BMWs:
    2011+ F10 BMW M5
    2012+ F06 BMW M6 Gran Coupe
    2012+ F13 BMW M6
    Part #: 31357850119
    Price: $340.95 (USD) 
    Quantity:   
    AFe Control Sway Bar Rear  --  F30 335i 340i

    The aFe Control Rear Sway Bar is a great upgrade option for your high performance BMW. Its 2-way adjustable, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bends and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are polyurethane bushings and CNC Machined 6061-T6 Aluminum Brackets.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 29mm Rear Sway Bar
    • CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications

    Vehicle Fitment:

    2012+ F30 BMW 335i 340i

    Part #: 440X503002RN
    Price: $395.00 (USD) 
    $474.00 (17% off MSRP)
    Quantity:   
    H&R Front Sway Bar - 28mm - F30 320xi, 328ix - F32 428xi 28mm 2 way adjustable bar; bushings included.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F31 BMW 328i xDrive - Wagon
    2013+ F32 BMW 428i xDrive - Coupe
  • Part #: 70878-6
    Price: $399.95 (USD) 
    Quantity:   
    E36 325i/328i/M3 Turner Motorsport Front 30mm Sway Bar Front Only
    This is the 3rd Generation of the TMS E36 sway bar / swaybars and features CNC'd ends, two adjustment positions, re-countoured bends for better clearance, and one of the largest solid sway bars available (30mm). We couldn't find a large front sway bar that we liked so we made our own - perfect for taming that understeer!

    From years of racing the E36 in World Challenge we have discovered the E36 favors a larger front bar without over doing the size of the rear. We normally pair this front bar with our 24mm rear bar. This is the best combination we could find to reduce body roll while making handling as neutral as possible. The swaybar sits in a polyurethane bushing which has a squeak resistant lining. Perfect for street use and great for competition / track applications.

    This is the E36 front swaybar only and we sell it as an upgrade over other smaller front sway bars (27mm, 28mm, etc.). For the Front/Rear swaybar set, click here.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Part #: TMSE36M3-F
    Price: $299.95 (USD) 
    Quantity:   
    E39 525i/528i/530i Eibach Sway Bar Kit After shocks and springs, sway bars make the biggest change in handling. Larger swaybars for the E39 will reduce bodyroll and understeer. The car will corner flatter with the tire in better contact with the pavement. This is a set of front 27mm and rear 18mm sway bars that are larger than the factory E39 6-cyl bars. The front bar is adjustable to fine-tune the handling characteristics. Front and rear urethane bushings are included.
    Part #: 2053.320
    Price: $379.95 (USD) 
    Quantity:   
    BMW Front 25mm Sport Sway Bar Upgrade - E34 525i, 530i, 535i, 540i This is the Original BMW Sport Suspension front sway bar as used on the M5 3.8 and 540i M-Sport models. This is the real factory Euro M5 front swaybar! It's a hefty 25mm in diameter and with less bends than the other 25mm Sport sway bars. The fewer bends means the bar is stiffer so even people with the stock 25mm Sport swaybar will feel a (small) difference. The bar includes new rubber bushings and mounts to the car with the original bushing brackets and sway bar links.

    If you're upgrading from a standard swaybar you should strongly consider also purchasing the Nurburgring 20mm rear sway bar at the same time. Sway bars work best when balanced with the rest of the chassis. Using a front bar that is too large in relation to the rear bar (and other suspension upgrades) can result in undesirable handling.

    This front swaybar fits all E34 except the 1991-1995 525i (M50 engine). Fitting to the M50 cars can be done but requires modification to the front subframe and other pieces.

    This item fits the following BMWs:
    1989-1990 E34 BMW 525i
    1989-1995 E34 BMW 530i 535i 540i
    Part #: TMS20543
    Price: $330.85 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    H&R Front Sway Bar - E85 Z4 - 27mm Front sway bar / swaybar with urethane/Teflon bushings. 27mm diameter. Adjustment positions at the bar end with the original sway bar link.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si
  • Part #: 70276
    Price: $222.95 (USD) 
    Quantity:   
    SpecE46 Turner Motorsport Sway Bar Set We put together this special sway bar set for the SpecE46 racing class (SE46) and any other E46 that gets heavy track time. We use the 30mm M3 front bar combined with the 21mm E46 non-M rear bar. From our time racing the E46 in World Challenge, Grand-Am, and SCCA club racing we found that the E46 likes a stiffer sway bar and less spring rate. Taking the M3 front bar, which is solid, is exactly what we wanted. They are adjustable in the front (3-position) and the rear (2-position) to fine tune the handling. Bushings are included and new adjustable links are optional. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends.

    Setup: The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the holes furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and the rear bar positioned in the soft setting. Adjust to your liking from there. When using these in a non-SE46 setup (or other struts beside MCS) the strut housing may have to be rotated in the spindle so that the sway bar link lines up better with the sway bar tab on the strut.

    Adjustable sway bar links are strongly advised to ensure that there is no pre-load on the bars. And to position the bar so that it has the correct clearance to other suspension components. Pre-load is when the bar is slightly stressed when it's on the car, from differing ride heights or from the chassis being slightly twisted. With the SE46 coil overs the adjustable links are a smart idea. If you have to force the links to fit the bar because it has tension then you have pre-load. Adjustable front or rear links can be added from the options listed below.

    This item fits the following BMWs:
    1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
    2001-2006 SpecE46 BMW 330i 330ci
    Part #: SE46-SWAYBARS
    Price: $399.95 (USD) 
    Free Shipping Free Shipping
    H&R Front Sway Bar - E9X M3 - 27mm
    • 52% stiffer than the factory E90/E92 M3 bar. 42% stiffer than the E93 M3 bar!
    • 27mm straight across (not a tapered center like the E93 M3 factory bar)
    • Solid core, not hollow like the stock bars (better at resisting twist)
    • Forged, non-adjustable steel ends
    • Highest tensile steel strength available

    The H&R for the E9X M3 is the best anti-roll bar option for the E9X M3. Don't be let down by the "small" size compared to the factory sway bar sizes - there are some big differences! We've had our in-house suspension engineers run the math and the H&R swaybar is over 52% stiffer than the factory E90/E92 M3 bar and even over 42% stiffer than the E93 M3 sway bar upgrade. There are several reasons for this - the stock sway bars are hollow (for lighter weight) and will twist more than the solid H&R bar. Also, the E93 M3 bar is often called a 28mm bar but it actually tapers down in the center to 24mm which greatly reduces its effectiveness. So if you're looking for a serious sway bar upgrade, the H&R is clearly the way to go. Note: to maintain the handling balance of the car, we recommend only using the front bar with the matching H&R rear bar or heavily revised racing suspension.

    For a more in-depth analysis of the E9X front sway bar differences, check out our FAQ!

    This bar re-uses the factory M3 sway bar bushings and brackets.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2008+ E90 BMW M3
    2008+ E92 BMW M3

     

    Part #: 70053
    Price: $289.95 (USD) 
    Quantity:   
    F22 Xi, F3X Xi AWD Dinan Adjustable Sway Bar Set

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the AWD Xi F22 and F30-F36 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Both front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

    Dinan F3X AWD Sway Bar Specs:
    F: 25mm, hollow, 3-position adjustable, urethane bushings and brackets included
    R: 19mm, hollow, 3-position adjustable, urethane bushings and brackets included

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

    This item fits the following BMWs:
    2014+ F22 F23 BMW 228iX M235iX
    2012+ F30 BMW 328i X-Drive 335i X-Drive - Sedan
    2012+ F31 BMW 328i X-Drive - Touring Wagon
    2012+ F32 BMW 428i X-Drive 435i X-Drive - Coupe
    2013+ F33 BMW 428i X-Drive 435i X-Drive - Convertible
    2012+ F34 BMW 328i X-Drive 335i X-Drive - Gran Turismo
    2012+ F36 BMW 428i X-Drive 435i X-Drive - GranCoupe

    Part #: D120-0595
    Price: $823.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    H&R Front Sway Bar - 28mm - F22 228i As Used on Project F22 228i
    28mm 2 way adjustable bar; bushings included.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension?s roll stiffness?or its resistance to roll in turns?while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness?giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2014+ F22 BMW 228i
  • Part #: 70878
    Price: $399.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - E46 2 way adjustable 27mm front sway bar / swaybar for E46 Cars. Includes bushings

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
  • Part #: 70484
    Price: $278.95 (USD) 
    Quantity:   
    E46 Non-M ECS Tuning 27mm Performance Front Sway Bar

    E46 323/325/328/330i 2-way adjustable 27mm front sway bar with urethane bushings.

    Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road. 

    ECS has specified an adjustable 27mm sway bar that has been fine-tuned for use on the E46 non-M models. Urethane bushings with a reinforced inner core that requires no lubrication are included. 

    Fits RWD models only (not 325xi/330xi).

    This item fits the following BMWs: 
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 

    Part #: 007277ECS01A
    Price: $169.95 (USD) 
    Quantity:   
    E46 323/325/328/330i/ci Turner Motorsport Front/Rear 27/21 Sway Bar Upgrade As Used on Project E46 330 To reduce the understeering affects of a staggered wheel setup you want a balanced set of sway bars. We use a 2-way adjustable 27mm front bar and a 3-way adjustable, 21mm rear bar. These anti-roll bars have precision forged ends and include urethane bushings with a reinforced inner liner that eliminates squeaks and doesn't require lubrication. The bars are powder coated for durability and good looks. These bars are made from a proprietary alloy that is both stronger and more resilient than other sway bar kits.

    Fitment
    These bars fit in the stock locations using the existing brackets and links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs. We can also include new factory links with the hardware pressed in for a quicker install. This is especially helpful in the rear where the hardware can be tricky. To avoid pre-loading the bar, it is best to leave one side un-done until the car is lowered to the ground. Never connect both links to the same bar with the car off the ground.

    Do I need adjustable sway bar links?
    The adjustable sway bar links ensure that there is no pre-load on the bar and that the bar has the correct clearance to other suspension components. Pre-load is when the bar is slightly stressed when it's on the car. If you have to force the links to fit the bar because it has tension then you have pre-load. Adjustable links fix all of that because you can then shorten or lengthen the link to match the installation of the bar. If you have coil overs or the car is very low, you should definately have the adjustable links because these conditions may contribute to the pre-load situation.

    Setup
    The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the hole(s) furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and the rear bar positioned in the middle. Adjust to your liking from there.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
    Part #: TMSSWAYE46
    Price: $399.95 (USD) 
    Free Shipping Free Shipping
    H&R Rear Sway Bar - E36 318ti 2 way adjustable 19mm rear sway bar / swaybar for E36 318ti/Compact. Includes bushings.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1995-1999 E36 BMW 318ti
  • Part #: 71970
    Price: $214.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - Z3 M Roadster/Coupe M Coupe/Roadster sway bar / swaybar - 21mm adjustable rear.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1997-2002 Z3 BMW M Roadster M Roadster
  • Part #: 71520
    Price: $238.95 (USD) 
    Quantity:   
    AFe Control Stage 1 Suspension Package - F87 M2

    aFe's Stage 1 Suspension Package is a combination of their Lowering Springs and their Sway bar set. With both, designed to be very durable performance oriented, this pairing is perfect for getting your car looking and performing as good as possible without modifications being done to shocks or other suspension components.

    The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
    • CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets
    • Direct Fit Installation, Requires No Modifications
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications

     

    Designed and engineered in the US, aFe's Control Lowering springs provide ample lowering for performance and appearance, while still maintaining a level of comfort for daily driven needs. These springs are built to optimize your factory shock absorber dampening and is 100% compatible with your EDC ride control. No modifications to the vehicle are necessary, the aFe Control Lowering Springs are a direct fit application. To go along with superb handling, their looks and overall quality follow suit. 2-Stage powder coating ensures that they will continue to look great after plenty of abuse. Street and track testing prove these springs to have great longevity, durability, and material quality.

    Product Features:

    • Engineered to optimize the factory shock absorber damping, including selective ride
    • 1" drop for the correct relation between looks and proper function
    • Engineered, designed and race tested to ensure the ultimate in quality and longevity
    • 2 Stage, high luster, tangerine orange powder-coated finish for unbeatable looks and durability
    • Direct Fit Installation

     

    Vehicle Fitment:

    2016+ F87 BMW M2

    Part #: 510-503009-N
    Price: $895.00 (USD) 
    Quantity:   
    E9X M3 Dinan Tubular Adjustable Front Anti-Roll Bar - 32mm

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 M3 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. This bar works best with Dinan shocks and springs or a similar sport suspension.

    Dinan E9X Sway Bar Specs:
    F: 32mm, hollow, 3-position adjustable, adjustable links, urethane bushings, and brackets included
    R: this front bar has been tuned to work with the stock rear bar

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This sway bar is worth 1 point towards your Dinan badge.

    This item fits the following BMWs:
    2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

    Part #: D120-0520
    Price: $514.00 (USD) 
    Quantity:   
    E60 M5, E63 M6 Dinan Roll Control/Sway Bar Package

    Dinan has a unique approach to fine-tuning the handling of the E60 M5, E63 M6 - to improve handling and not impact ride comfort they have engineered a way of stiffening the stock front sway bar while replacing the rear bar with a slightly larger bar. Instead of the traditional larger sway bar Dinan has come up with this way of stiffening the stock front bar. They have relocated the attachment point for the link to be further away from the end - effectively shortening the bar and making it stiffer. This has a number of advantages over a thicker aftermarket bar: lower cost, the bar does not have to be removed, no tradeoff in ride comfort. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned to reduce bodyroll, improve steering and turn-in response, and reduce understeer. This is the same setup as used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 2 point towards your Dinan badge.

    The installation on the front bar requires drilling a hole on each end of the bar. The drilling and installation of the relocating bracket can be done with the sway bar still on the car. Detailed installation instructions are included.

    This item fits the following BMWs:
    2006-2010 E60 BMW M5
    2006-2010 E63 E64 BMW M6

    Part #: E60M5-D120
    Price: $389.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    H&R Rear Sway Bar - E46 (RWD / non-sport package) 3 way adjustable 21mm rear sway bar / swaybar for E46, non-M RWD models only (no xi AWD models.) Includes new bushings.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
  • Part #: 71484
    Price: $214.95 (USD) 
    Quantity:   
    E82 128/135, E9X 325i/328i/330i/335i RWD Dinan Sway Bar Set

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

    Dinan E9X Sway Bar Specs:
    F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
    R: 15.8mm, solid, non-adjustable, urethane bushings included

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

    Note: main image may not match actual sway bars.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is - Coupe
    2007-2013 E93 BMW 328i 335i 335is - Convertible

    Part #: E9XR30D120
    Price: $802.00 (USD) 
    Quantity:   
    E46 Turner Front Sway Bar - 27mm 2 way adjustable 27mm front sway bar / swaybar for E46 323/325/328/330. Includes bushings.

  • Reduces body roll
  • Improves steering turn-in and handling
    Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road.

    We use an adjustable 27mm sway bar that has been fine-tuned for use on the E46 non-M models. Urethane bushings with a reinforced inner core that requires no lubrication are included. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends.

    Fits RWD models only (not 325xi/330xi).

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
  • Part #: E46-F27-SWAY
    Price: $272.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - E46 M3 3 way adjustable 30mm front sway bar / swaybar for 2001-2006 E46 M3. Includes bushings.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
  • Part #: 70414
    Price: $278.95 (USD) 
    Quantity:   
    H&R Sway Bar Kit - E9X M3
  • 27mm Front Sway Bar
  • 23mm Rear Sway Bar

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2006+ E90 BMW M3 Sedan
    2007+ E92 BMW M3 Coupe
    2007+ E93 BMW M3 Convertible
  • Part #: 70053-71053
    Price: $579.90 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E90/E92/E93 Coupe, Sedan, Convertible  2006+ 20mm fixed bar (no adjustments); bushings included.

  • Reduces body roll
  • Highest tensile strength available
    H&R Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. Swaybars increase your suspension’s roll stiffness — its resistance to roll in turns — while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. Adding just a rear swaybar to your E9X (i or xi) can make a dramatic improvement in reducing understeer and improving handling balance. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2006+ E90 BMW 325i 325xi 328i 330i 335i - Sedan
    2008+ E90 BMW 335d - Sedan
    2007+ E92 BMW 328i 335i 335is - Coupe
    2007+ E93 BMW 328i 335i - Convertible
  • Part #: 71490
    Price: $238.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E46 M3 - 25mm Adjustable H&R adjustable 25mm rear sway bar / swaybar for all 2001-2006 E46 M3 coupe and convertible. Includes bushings. Made in Germany.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
  • Part #: 71414
    Price: $262.95 (USD) 
    Quantity:   
    BMW Rear 20mm Nurburgring Sway Bar Upgrade - E34 525i, 530i, 535i, 540i & M5 For the M5 3.8 BMW offered an optional Nurburgring handling package with this 20mm rear sway bar. This is currently the biggest rear sway bar available anywhere and is a direct bolt-in replacement for the stock or aftermarket bar. This bar is complete with new rubber bushings with new brackets and links optional.

    The larger bar will make the suspension stiffer than before, with less roll and less understeer. The larger rear bar will actually make the rear end rotate easier making the car more agile in tight corners. If you have stock E34 (non-sport) swaybars on now this 20mm Nring bar will be a huge difference. If you have an E34 sport suspension, E34 M5, 540i M Sport, or aftermarket cars the difference will be smaller. But since BMW installed this as part of a factory handling package it will be an improvement for track, autocross, or backroad handling.

    Included in this package:
  • 33552227416 - E34 M5 3.8 Nurburgring 20mm rear swaybar
  • 33552227240 - 20mm rear swaybar bushings
  • optional 33506779734 - rear swaybar bushing brackets (not required but get rid of those rusty original ones!)
  • optional 33551135307 - rear swaybar links
    This sway bar upgrade fits the following BMWs:
    1989-1995 E34 BMW 525i 530i 535i 540i M5
  • Part #: TMS16594
    Price: $266.75 (USD) 
    Free Shipping Free Shipping
    H&R Rear Sway Bar - 20mm - F10 528i 535i 535d 550i H&R Rear sway bar / swaybar for F10 - 20mm, fixed (non-adjustable.)

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2011+ F10 BMW 528i 535i 535d 550i -Not for cars with Dynamic Drive
  • Part #: 71470
    Price: $314.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    H&R Front Sway Bar - E90/E92/E93 Coupe, Sedan, Convertible (non-Xi) As Used on Project E92 335i
    27mm fixed bar (no adjustments); bushings included.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension?s roll stiffness?or its resistance to roll in turns?while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness?giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2006+ E90 BMW 325i 325xi 328i 330i 335i - Sedan
    2008+ E90 BMW 335d - Sedan
    2007+ E92 BMW 328i 335i 335is - Coupe
    2007+ E93 BMW 328i 335i - Convertible
  • Part #: 70490
    Price: $278.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E30 318i, 318is, 325e/es, 325i/is 2 way adjustable 18mm rear sway bar / swaybar for E30 Cars. Includes bushings

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
  • Part #: 71406
    Price: $182.95 (USD) 
    Free Shipping Free Shipping
    on orders $200 and up
    Quantity:   
    H&R Front Sway Bar - 30mm - F10 528i 535i 535d 550i 30mm fixed (non-adjustable) bar; bushings included.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2011+ F10 BMW 528i 535i 535d 550i - not for cars with Dynamic Drive
  • Part #: 70470
    Price: $409.95 (USD) 
    Quantity:   
    E46 M3 Turner Motorsport Front/Rear 30/25 Sway Bar Upgrade As Used on Project E46 M3
    The Turner Motorsport sway bar / swaybars for the E46 M3 were designed to provide better overall balance and performance than the stock anti-roll bars. With these bars you can greatly reduce bodyroll and decrease the understeering effects of a staggered wheel setup. They are adjustable in the front (3-position) and the rear (2-position) to fine tune the handling for both the street and the track. The Turner bars are sized at 30mm in the front and 25mm in the rear (+4 and +3.5mm from stock, respectively). We supply them with a urethane bushing with a reinforced inner core that requires no lubrication or maintenance so you won?t have to put up with annoying squeaks and annual greasing work. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends. We feel that these are the best bars on the market for the E46 M3 - we have used these on our race-winning M3s in the Koni Challenge and SCCA T2 classes.

    Fitment
    These bars fit in the stock locations using the original brackets and links. Our bar has been designed to use the stock M3 front sway bar links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs. The rear hardware has been upgraded in our kit to a M10 sized bolt and it can be a little tricky to install on the factory end link. Contact us if you would like to have new links included with the hardware pre-installed. To avoid pre-loading the bar, it is best to leave one side un-done until the car is lowered to the ground. Never connect both links to the same bar with the car off the ground.

    Do I need adjustable sway bar links?
    The adjustable sway bar links ensure that there is no pre-load on the bar and that the bar has the correct clearance to other suspension components. Pre-load is when the bar is slightly stressed when it's on the car. If you have to force the links to fit the bar because it has tension then you have pre-load. Adjustable links fix all of that because you can then shorten or lengthen the link to match the installation of the bar. If you have coil overs or the car is very low, you should definitely have the adjustable links because these conditions may contribute to the pre-load situation. Adjustable front or rear links can be added from the options listed below.

    Setup
    The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the holes furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and the rear bar positioned in the soft setting. Adjust to your liking from there.

    Click Here for Independent Reviews of this Kit!

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
    Part #: 33355TMS
    Price: $399.95 (USD) 
    Free Shipping Free Shipping
    H&R Front Sway Bar - MINI Cooper - R50-R53 As Used on our Project Mini Cooper S
    27mm front sway bar / swaybar for MINI Cooper and Cooper S. Includes bushings.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension?s roll stiffness?or its resistance to roll in turns?while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness?giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2002-2006 R50 MINI MINI Cooper
    2002-2008 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-2006 R53 MINI MINI Cooper S
  • Part #: 70416
    Price: $230.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E9X M3 - 23mm
  • 23mm
  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance. Designed for use with stock bushings. Either re-use stock bushings or purchase new stock bushings.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2006+ E90 BMW M3
    2007+ E92 BMW M3
    2007+ E93 BMW M3
  • Part #: 71053
    Price: $289.95 (USD) 
    Rear AFe Control Sway Bar  --  F80 F82 F83 F87 BMW

    The aFe Control Rear Sway Bar is a great upgrade option for your high performance BMW. Its tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bending and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 sway bushing brackets that are anodized black and polyurethane bushings.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 29mm Rear
    • CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets
    • Direct Fit Installation, Requires No Modifications
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications

    Vehicle Fitment:

    2016+ F87 BMW M2

    2015+ F80 BMW M3

    2014+ F82/F83 BMW M4

    Part #: 440-503001RN
    Price: $395.00 (USD) 
    Quantity:   
    H&R Front Sway Bar - 30mm - F80 M3, F82 M4


    30mm (2 hole adjustable) bar; bushings included.

     

     

    • Reduces body roll

    Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension?s roll stiffness?or its resistance to roll in turns?while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness?giving you an unmatched level of precision and performance.

    This item fits the following BMWs:

    2015+ F80 BMW M3

    2015+ F82 BMW M4

    2016+ F87 BMW M2

     

     

    Part #: 70474
    Price: $399.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    H&R Front Sway Bar - 28mm - F30 320i, 328i - F32 428i 28mm 2 way adjustable bar; bushings included.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2012+ F30 BMW 320i 328i - Sedan
    2013+ F32 BMW 428i - Coupe
  • Part #: TMS204898
    Price: $399.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - E36 (not M3) 2 way adjustable 28mm front sway bar / swaybar for all E36 cars. Includes bushings.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
  • Part #: 70824
    Price: $278.95 (USD) 
    Quantity:   
    E60 M5, E63 M6 Dinan Adjustable Rear Anti-Roll Bar - 21mm

    Dinan has engineered this sway bar to work only with their Roll Control System to give the M5/M6 better balance in the corners.

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

    Dinan E60/E63 Sway Bar Specs:
    R: 21mm, solid, 3-way adjustable, urethane bushings included

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

    This item fits the following BMWs:
    2006-2010 E60 BMW M5
    2006-2010 E63 E64 BMW M6

    Part #: D120-0491
    Price: $184.00 (USD) 
    Quantity:   
    E82/E9X ECS Tuning 28mm Performance Front Sway Bar

    E82/E9X 28mm front sway bar with urethane bushings.

    Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road. 

    ECS has specified a 28mm sway bar that has been fine-tuned for use on the E9X and E82 models. Urethane bushings with a reinforced inner core that requires no lubrication are included. 

    This item fits the following BMWs: 
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    Part #: 007278ECS01A
    Price: $209.95 (USD) 
    Quantity:   
    F10 M5, F06 M6 GC, F13 M6 Rear Competition Package Sway Bar As Used on the Turner F13 M6
    This is the rear swaybar from the Competition Package on the F10 M5, F13 M6, F06 M6 Gran Coupe. It's stiffer than the standard M5/M6 front sway bar so the car handles with less bodyroll and crisper handling. This is the factory BMW Competition Package rear swaybar and includes new rubber bushings. It fits with cars not equipped with Dynamic Drive/active swaybars.

    This item fits the following BMWs:
    2011+ F10 BMW M5
    2012+ F06 BMW M6 Gran Coupe
    2012+ F13 BMW M6
    Part #: 33557850120
    Price: $281.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - 28mm - F30 335i xDrive - F32 435i xDrive

    28mm 2 way adjustable bar; bushings included.
     

    • Reduces body roll
    • Highest tensile strength available

      H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension's roll stiffness or its resistance to roll in turns while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness giving you an unmatched level of precision and performance.

      This item fits the following BMWs:
      2012+ F30 BMW 335i xDrive - Sedan
      2013+ F32 BMW 435i xDrive- Coupe
    • 2014+ F22 BMW M235i xDrive- Coupe
    Part #: 70878-3
    Price: $399.95 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E60 E63 19mm with 3-position adjustment; bushings included; not for cars with Active Roll Stabilization (ARS)

    H&R Sport sway bar / swaybars are crafted from a special (hf) 50CrV4 steel alloy—the highest tensile strength available. The quality of the material and design guarantees smooth transitional sway bar function—decreasing the feedback response time—and increases stiffness over stock. H&R Sport sway bar / swaybars improve a vehicle’s lateral stability and cornerning grip, while reducing body roll.

    H&R Sport Sway Bars are precision engineered—designed and manufactured to be strong, resilient, and durable. Adhering to the same manufacturing philosophy as H&R’s world-renowned springs, H&R Sport Sway Bar design and production receives significant attention to detail and commitment. Each sway bar is cold-formed and heat-treated, with forged seamless bar ends. H&R shot-peens the sway bars to increase durability and check for dimensional correctness. At H&R’s ISO9001 certified manufacturing facility in Germany, production is completed in-house and each sway bar must pass a series of rigorous quality control tests to earn H&R’s approval and yours.

    Being 100% German made means a commitment to doing it right—giving you the best quality product.

    This item fits the following BMWs:
    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i - not for Xi models - not for cars with Active Roll Stabilization / Dynamic Drive
    2004+ E63 BMW 645ci 650i - not for cars with Active Roll Stabilization / Dynamic Drive
    Part #: 71460
    Price: $262.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - Z3 - 28mm Z3 H&R 28mm Front sway bar / swaybar - fully adjustable.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
  • Part #: 70754
    Price: $278.95 (USD) 
    Quantity:   
    Part #: D120-0380
    Price: $256.00 (USD) 
    Quantity:   
    H&R Rear Sway Bar - E36 M3 H&R Rear sway bar / swaybar for E36 M3 - 24mm, fully adjustable.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1995-1999 E36 BMW M3
  • Part #: 71910
    Price: $233.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - E30 318i, 318is, 325e/es, 325i/is 3 way adjustable 22mm front sway bar / swaybar for E30 Cars. Includes bushings

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
  • Part #: 70406
    Price: $262.95 (USD) 
    Quantity:   
    E46 M3 Turner Front Sway Bar - 30mm

    3 way adjustable 30mm front sway bar / swaybar for E46 M3. Includes bushings.

    • Reduces body roll
    • Improves steering turn-in and handling

    Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road.

    We use an adjustable 30mm sway bar that has been fine-tuned for use on the E46 M3. Urethane bushings with a reinforced inner core that requires no lubrication are included. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3

    Part #: E46M3-F30-SWAY
    Price: $272.95 (USD) 
    Quantity:   
    H&R Front Sway Bar - E36 M3 H&R Front sway bar / swaybar for E36 M3 - 28mm, fully adjustable.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    1995-1999 E36 BMW M3
  • Part #: 70910
    Price: $278.95 (USD) 
    Quantity:   
    AFe Control Sway Bar Front -- F30 335i 340i

    The aFe Control Front Sway Bar is a great upgrade option for your high performance BMW. Its 2-way adjustable, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bends and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish makes this bar very high quality and durable enough to withstand years of abuse and still look great. Included are polyurethane bushings.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 32mm Front Sway Bar
    • 2 Position Adjustable, CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications

    Vehicle Fitment:

    2012+ F30 BMW 335i 340i

    Part #: 440X503002FN
    Price: $395.00 (USD) 
    $474.00 (17% off MSRP)
    Quantity:   
    H&R Front Sway Bar - E60 E63 27mm with 2-position adjustment; bushings included; not for cars with Active Roll Stabilization (ARS)

    H&R Sport sway bar / swaybar / swaybars are crafted from a special (hf) 50CrV4 steel alloy—the highest tensile strength available. The quality of the material and design guarantees smooth transitional sway bar function—decreasing the feedback response time—and increases stiffness over stock. H&R Sport Sway Bars improve a vehicle’s lateral stability and cornerning grip, while reducing body roll.

    H&R Sport Sway Bars are precision engineered—designed and manufactured to be strong, resilient, and durable. Adhering to the same manufacturing philosophy as H&R’s world-renowned springs, H&R Sport Sway Bar design and production receives significant attention to detail and commitment. Each sway bar is cold-formed and heat-treated, with forged seamless bar ends. H&R shot-peens the sway bars to increase durability and check for dimensional correctness. At H&R’s ISO9001 certified manufacturing facility in Germany, production is completed in-house and each sway bar must pass a series of rigorous quality control tests to earn H&R’s approval and yours.

    Being 100% German made means a commitment to doing it right—giving you the best quality product.

    This item fits the following BMWs:
    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i - not for Xi models - not for cars with Active Roll Stabilization / Dynamic Drive
    2004+ E63 BMW 645ci 650i - not for cars with Active Roll Stabilization / Dynamic Drive
    Part #: 70460
    Price: $209.40 (USD) 
    $278.95
    Limited Qty Sale
    Quantity:   
    Rear Adjustable Sway Bar - 19mm - E30 318i 318is 325e 325i 325is 325ix M3 This adjustable rear sway bar / swaybar is 19mm is much larger than stock (stock 325e/i/ix is 12mm, M3 is 14.5mm) to provide better handling and roll resistance. This rear bar is a GREAT upgrade for the 325ix. (a popular upgrade is cutting a coil off the front spring and installing this bar) It is also adjustable for fine tuning of the performance characteristics. Fits BMW E30 318i 325e 325i 325ix M3 1984-1991.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 325e 325es 325i 325is 325ix M3
    Part #: 51010
    Price: $199.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.