Find Parts That Fit Your Vehicle

Home
Maintenance
Service Reset Tools & Fault Code Readers

BMW Service Reset Tools & Fault Code Readers

Fault Code Readers and Diagnostic Scanners put the power of the dealership in your hands. The Check Engine or Service Engine Soon light means something! It's alerting you to a potential problem and a fault code has been stored in the car's internal diagnostic system. You can take the car to the dealer and have the code pulled for you (for a one-time fee) or you can buy one of these code readers and check the trouble code yourself (and any other code that may come up in the future). These diagnostic tools pay for themselves. They are a must for the DIYer or any mechanic. These tools can read and reset trouble codes and reset your maintenance interval settings. A separate tool can also be used to reset the SRS system (separate from the engine diagnostic system). Peake Reset Tools come with a booklet containing instructions and a list of codes.

For newer cars we also sell multi-function scan tools, gauges, and programmers. Reading and resetting Diagnostic Trouble Codes (DTC) are some of the many functions that these handheld and dash-mounted accessories perform. These are the next generation of 'smart' programmers capable of loading new versions of engine software, recording and playback of data, and timing meters.

This category contains parts that fit the following chassis:

Sort By:

Race German Service Reset Tool - OBD1 (up to 2000)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
FOR OBD1 VEHICLES ONLY - FOR OBDII MODELS, SEE T#7703227

T#:7703226

Part#: RGOBD1SRT

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Resetting your service and oil light on your BMW can be a hassle. Some jumper pins on the 20 pin connector to make this work. Now its a lot easier. Race German's BMW service and oil light reset tool makes this job a breeze. Simply connect to your 20 pin service plug under the hood, turn the key to the accessory position and click the button on the adapter. Thats it! No batteries required. Instructions: 1. Plug the Device into the 20 Pin diagnostic socket of the car located in the engine compartment (OBD1), or under drive footwell (OBD2). 2. Turn ignition key to enable the board electronic but don`t turn on the motor. 3. Press the button for the operation you want to perform and keep it pressed. 4. The LED of the chosen operation will be on. 5. Keep the button pressed. 6. Reset is done when the LED is turning off itself. 7. Release button.

Show More Show Less

Race German Service Reset Tool - OBD2 (2001+)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7703227

Part#: RGOBD2SRT

In Stock

$ 41.99

This product was last offered at the strikethrough price on
06-09-2026

$ 37.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 41.99

This product was last offered at the strikethrough price on
06-09-2026

$ 37.99 USD

Limited Qty Sale

Add to Wish List

Show More Show Less

Cobb Tuning AccessPort V3 - 135i 1M 335i 535i Z4 35i/is (N54 Engine 2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:183977

Part#: AP3-BMW-001

Ships in 3 Business Days

$ 715.00 USD

Add to Wish List

Qty

$ 715.00 USD

Add to Wish List

THE EASIEST WAY TO 85+ HP ON THE N54 TWIN-TURBO!
HP gain = 85+ hp
Trq gain = 100+ ft-lbs
Plug-In Power! Easy to use and completely reversible!
Expect higher gains with additional modifications

New Features
Larger, full color, higher resolution screen
We super sized the screen for ease of use and better monitoring. Full text help menus, multi-gauge layouts, full map descriptions and more. This screen has room to spare - so no need to run back to your laptop.

Customizable multi-gauge display
Want gauges? No problem. The V3 now supports up to 6 fully customizable gauges with 1/1000 resolution. Monitor all the parameters you want to see and customize each layout for street, strip or track.

In vehicle mount, with on/off switch
There is nothing we like more to see than an AP peeking over the dash. With the on/off button and using the included universal mount or vehicle specific options, there is no reason not to run your AP in-vehicle.

Faster and easier to use with a familiar face
We listened to what you wanted. Use your same maps, monitor your same parameters, and troubleshoot your same codes, but now with more. More speed, more memory, more map storage, more live gauges, and more troubleshooting help.

Interchangeable faceplates
Is it your Accessport or our Accessport? It's yours. Customize it as you see fit. The new V3 comes with 2 interchangeable bezels, blue and grey, or put your own touches on one.

The Cobb Tuning AccessPort is a flashing tool that installs performance software through the OBD port on your car. No other software is as easy to use and install! If you can program a TV remote, you're over-qualified to install this software. Just plug the AccessPort into the OBDII port under the dash, bring up the AccessPort onscreen menu, select from a variety of engine maps for your desired performance and install. It's that easy. The software is from COBB Tuning - one of the most accomplished software tuners in the business. The Cobb software replaces the conservative factory settings with different maps to make more power.

The AccessPort maintains the sophisticated control logic, refined engine response and excellent driveability of the stock BMW computer while providing impressive power gains and improved performance. Pre-loaded on the AccessPort are engine maps for 91 or 93 octane fuel, and a valet mode, with the capacity to hold up to 100 other tuning files! The AccessPort also saves your stock tune for you to revert back to factory settings at any time. It also has the the ability to download additional maps so that you can run various upgrades with the correct software tune. Additional tunes are available direct from Cobb through their AccessPort manager program (available for PC or OSX). Cobb also provides tech support.

In addition to the performance improvements, the AccessPort includes a variety of other useful tools -
+ performance measurements
+ data logging - up to 10 hours
+ fault code/DTC reading and clearing
+ check/verify performance modifications - measures 0-60 and � mile times and can measure approximate HP

The AccessPort can display boost pressure, oil temperature, pedal position, load, individual cylinder timing, and other engine data channels with the Live Data feature.

Tutorial Videos:

Simple Installation
Firmware Update
Change Map
Performance

Live Data
Data Logging
Trouble Codes
Uninstall

Typical Performance Gains:
135i 335i 335xi Z4 35i +30% Peak HP & +38% Peak TQ
535i 535xi - +19.2% Peak HP & +30.5% Peak TQ

This item fits the following BMWs with N54 turbo engines:
2008-2010 E82 BMW 135i
2011+ E82 BMW 1M Coupe
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2012 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 335i 335is Convertible
2007-2010 E60 BMW 535i 535xi 535i xDrive
2009+ Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Cobb Tuning AccessPort V3 - 135i 335i (N55 Engine 2011)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CARB certified for sale in all 50 states

T#:183979

Part#: AP3-BMW-002

EO#: D-660-7

In Stock

$ 715.00 USD

Add to Wish List

Qty

$ 715.00 USD

Add to Wish List

THE EASIEST WAY TO 55+ HP WITH THE N55
HP gain = 55+ hp
Trq gain = 78+ ft-lbs
Plug-In Power! Easy to use and completely reversible!

New Features
Larger, full color, higher resolution screen
We super sized the screen for ease of use and better monitoring. Full text help menus, multi-gauge layouts, full map descriptions and more. This screen has room to spare - so no need to run back to your laptop.

Customizable multi-gauge display
Want gauges? No problem. The V3 now supports up to 6 fully customizable gauges with 1/1000 resolution. Monitor all the parameters you want to see and customize each layout for street, strip or track.

In vehicle mount, with on/off switch
There is nothing we like more to see than an AP peeking over the dash. With the on/off button and using the included universal mount or vehicle specific options, there is no reason not to run your AP in-vehicle.

Faster and easier to use with a familiar face
We listened to what you wanted. Use your same maps, monitor your same parameters, and troubleshoot your same codes, but now with more. More speed, more memory, more map storage, more live gauges, and more troubleshooting help.

Interchangeable faceplates
Is it your Accessport or our Accessport? It's yours. Customize it as you see fit. The new V3 comes with 2 interchangeable bezels, blue and grey, or put your own touches on one.

The Cobb Tuning AccessPort is a flashing tool that installs performance software through the OBD port on your car. No other software is as easy to use and install! If you can program a TV remote, you're over-qualified to install this software. Just plug the AccessPort into the OBDII port under the dash, bring up the AccessPort onscreen menu, select from a variety of engine maps for your desired performance and install. It's that easy. The software is from COBB Tuning - one of the most accomplished software tuners in the business. The Cobb software replaces the conservative factory settings with different maps to make more power. But it's more than just a way of loading performance software... The AccessPort also functions as a data logger and fault code reader . It's a multi-function tool that you will never get tired of picking up and checking out.

Data

Since it plugs into the car's OBD communication port it has unparalleled access to a stream of engine data. It reads and displays throttle position, boost, ignition advance, wastegate duty cycle, mass air flow, intake air temperature, air/fuel ratio, calculated load, and much more. You can also record data for later analysis - up to 10 hours of running data! It also works as a timing meter for 0-60, 1/8 mile, 60' acceleration, 330' acceleration, and 1,000' acceleration time. You can plug the AccessPort into a PC or Mac and view all of this saved data in their program. This information is invaluable for evaluating engine performance and performance modifications.

Diagnostics

With access to the OBD port, the Cobb tuner can also read and reset Diagnostic Trouble Codes (DTCs). This saves you a trip to the dealer or local shop simply to have a fault code interpreted. Now you can pull these codes and get an answer to the problem right away! The code number and a brief description of the code is given so you won't even have to search for it online. Reset the code and you're on your way (unless the code comes back...).

Power

The AccessPort comes pre-loaded with 4 tuning files - Stage 0 (stock), Stage 1 Sport (91 octane), Stage 1 Aggressive (93 octane), and a Valet file. Additional files are available from the Cobb website for things such as an intake and larger intercooler. It can hold up to 100 different tuning files! It also saves your stock original file so you can revert back to stock at any time. The AccessPort maintains the sophisticated control logic, refined engine response and excellent driveability of the stock BMW computer while providing impressive power gains and improved performance. Cobb engineers are constantly revising and tuning their files to extract the most horsepower with the least effect on reliability and drivability. Updated files and new maps for additional modifications are available direct from Cobb.

Typical Power Gains:

Car	Peak Power Gain 91 octane	Peak Power Gain 93 octane
135i/335i/335xi N55	+32hp (+10%) +42ft-lbs (+14%)	+56hp (+18%) +78ft-lbs (+26%)

Additional Resources

Tutorial Videos:

Simple Installation
Firmware Update
Change Map
Performance

Live Data
Data Logging
Trouble Codes
Uninstall

This item fits the following BMWs with the N55 single-turbo engine:
2011 E82 BMW 135i 135is
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011 E92 BMW 335i 335xi 335i xDrive - Coupe
2011 E93 BMW 335i - Convertible

Show More Show Less