Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW Stainless Steel Brake Lines

BMW Stainless Steel Brake Lines Stainless brake lines are a must for any track driven BMW and make a great upgrade on street cars as well. Brake lines should be replaced every few years anyway and braided stainless lines offer an additional layer of protection. Rubber brake lines deteriorate from the outside and inside. The external rubber can become stiff, crack, or get damaged by debris. The stainless braiding and Teflon inner coating help protect the outside of the line from debris. And with a stronger material the line will not expand or swell under extreme braking conditions. Stainless brake lines provide a firmer positive pedal feel under hard braking by greatly reducing the expansion that can be found in stock rubber lines. The internal of old stock rubber lines can become constricted over time even if the exterior looks normal. With a blockage or restriction you can have serious braking issues that often go mis-diagnosed as warped rotors, stuck calipers, or bad ball joints. Make sure you don't overlook your brake lines! All brake lines, rubber or stainless, should be replaced every few years and any time you replace a brake caliper.

These are the highest quality stainless brake lines that meet DOT specs at great prices. Our lines are made with stainless braiding and Teflon inner lines. The fittings are the correct BMW type and sizing and with swaged fittings and an additional rubber boot for protection.
For accurate results, specify your model below.
E30 Stainless-Steel Brake Line Set - DOT-approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These lines fit all 1984-1991 3 series (E30) BMWs **EXCEPT 325ix and 1984-1985 318i **. This kit fits all 325, 325e, 325es, 325i, 325is, 325ic, 318is, and M3.
StopTech
Part #: PLB323106D
Price: $124.95 (USD) 
In Stock
Quantity:   
Chase Bays Stainless-Steel Brake Line Set - E46 M3 This brake line kit is for the enthusiast who wants to increase braking response, improve pedal feel, and upgrade to a more durable setup.
Chase Bays
Part #: BMW-950
Price: $99.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Stainless-Steel Brake Line Set - E46 Non M This brake line kit is for the enthusiast who wants to increase braking response, improve pedal feel, and upgrade to a more durable setup.
Chase Bays
Part #: BMW-1700
Price: $99.99 (USD) 
In Stock
Quantity:   
Chase bays Hydro Handbrake Brake Line Kit - E46

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into the E46. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak free and safe operation.

 

*For vehicles with standalone or dual rear calipers only

Chase Bays
Part #: CB-BMWE46-HB
Price: $149.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Brake Line Relocation - E30

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

*For use with the Chase Bays Brake booster eliminator kit only.

 

Chase Bays
Part #: CB-BMW-E30BBE
Price: $299.99 (USD) 
Direct Ship
Quantity:   
E24 6 Series (incl M6) Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These lines fit all 1982-1989 BMW E24 6 Series and M6. These may be used on all 633CSi, 635CSi, and M6 that are a model year 1982, 1983, 1984, 1985, 1986, 1987, 1988, or 1989.

Turner Motorsport
Part #: PLB533106D-E24
Price: $124.95 (USD) 
In Stock
Quantity:   
Chase Bays hydraulic Handbrake Brake Line Kit

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into their E36. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak free and safe operation.

*For vehicles with standalone or dual rear calipers only

Chase Bays
Part #: CB-BMWE36-HB
Price: $149.99 (USD) 
Direct Ship
Quantity:   
E39 5 Series Stainless Steel Brake Line Set - DOT Approved E39 5 Series Stainless Steel Line Set - These lines are DOT approved and also feature a clear plastic outside protective coating.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
Sedan only. Not for Wagons.
StopTech
Part #: PLBE39
Price: $124.95 (USD) 
Direct Ship
Quantity:   
Chase Bays Brake Line Relocation - E36

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

Fits The Following

E36' s with build date up to up to 09/1994

*For use with the Chase Bays Brake booster eliminator kit only.

Chase Bays
Part #: CB-BMW-E36BBE-92
Price: $299.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Brake Line Relocation - E30

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

*​For Vehicles without ABS*

*For use with OE Master cylinder only.

Chase Bays
Part #: CB-BMW-E30OEMC
Price: $349.99 (USD) 
In Stock
Quantity:   
E36 (incl M3) Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These lines fit all 1992-1998 E36 3 series BMWs. Please note that both 323is/ic and 328i/is/ic produced 12/1997 and later use a 4 piece kit, versus all other e36 which use a 6 piece kit. Please choose your applicable E36 model below.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Turner Motorsport
Part #: PLB53310XX
Price: $124.95 (USD) 
In Stock
Chase Bays Brake Line Relocation - E30

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

*​For Vehicles with ABS*

*For use with OE Master cylinder only.

 

Chase Bays
Part #: E30ABSOEMC
Price: $349.99 (USD) 
Direct Ship
Quantity:   
Stoptech Stainless Steel Brake Lines - E90/E92 335xi,  335i xDrive These braided stainless steel lines for the 2007-2011 E9X 335xi improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 4 brake lines - 2 front and 2 rear - as well as pre-installed grommets on the front for ideal fit.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2007-2011 E90 BMW 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335xi 335i xDrive - Coupe
StopTech
Part #: PLBE9X335XI
Price: $124.95 (USD) 
In Stock
Quantity:   
Z4 Stainless Steel Brake Line Set Z4 Stainless Steel Brake Line Set, Teflon plastic coating and DOT Approved.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

Applications:
2003-2009 Z4 2.5/3.0/3.0Si (not Z4 M models)
StopTech
Part #: PLBZ4-E85-E86
Price: $159.95 (USD) 
In Stock
Quantity:   
Chase Bays hydraulic Handbrake Brake Line Kit - E30

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into the E30. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak free and safe operation.

 

*For vehicles with standalone or dual rear calipers only

Chase Bays
Part #: CB-BMWE30-HB
Price: $149.99 (USD) 
Direct Ship
Quantity:   
E28 5 Series (incl M5) Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. Tthese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.



These lines fit all 1982-1988 BMW 5 Series (E28) and M5. These may be used on all 533i, 528e, 535i, 535is and M5 that are a model year 1982, 1983, 1984, 1985, 1986, 1987, or 1988.

.
Turner Motorsport
Part #: PLB533106D-E28
Price: $124.95 (USD) 
In Stock
Quantity:   
Chase Bays Brake Line Relocation - E46

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

 

*For use with OE Master cylinder only

 

Chase Bays
Part #: CB-BMW-E46OEMC
Price: $349.99 (USD) 
Direct Ship
Quantity:   
M Coupe / Roadster Stainless Steel Brake Line Set Four piece, M Coupe / Roadster Stainless Steel Line Set - DOT Approved and feature a clear plastic outside coating.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
1998-2002 Z3 BMW M Roadster M Coupe
StopTech
Part #: PLBMCOUPE
Price: $124.95 (USD) 
In Stock
Quantity:   
Z3 DOT Stainless Steel Brake Line Set Z3 6 Pc. Stainless Steel Brake Line Set for Z3 (Lines do not fit MZ3).

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These brake lines fit all non-M Z3's, including Z3 1.9, Z3 2.3, Z3 2.5, Z3 2.8 and Z3 3.0.

Now available with clear protective coating! This special coating helps protect the braided stainless steel from abrasion or road-related damage.
StopTech
Part #: PLBZ396DCOAT
Price: $124.95 (USD) 
In Stock
Quantity:   
Chase Bays Brake Line Relocation - E46

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

*For use with the Chase Bays Brake booster eliminator kit only.

Chase Bays
Part #: CB-BMW-E46BBE
Price: $299.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Brake Line Relocation - E36

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

Fits The Following

E36' s with build date up to 09/1994

*For use with OE Master cylinder only

 

Chase Bays
Part #: E36OEMC-92
Price: $349.99 (USD) 
Direct Ship
Quantity:   
Vargas Line Lock Kit - F80 F82 F83

Vargas Turbo's line lock kit uses two solenoids to lock your front brakes, allowing you to warm up your tires at the track. The kit includes:

  • 2  line lock solenoids
  • 2 custom mounting brackets for durability
  • 2 sets of DOT-approved stainless brake lines
  • Parker steel fittings
  • Safety rocker switch

All wiring is included, along with detailed instructions to make your installation easier.

Intended for off-road use only. 

This product fits the following BMWs:
2015+ F80 M3
2015+ F82 M4 
2015+ F83 M4 Convertible

Vargas Turbo Technologies
Part #: VPP-F8X-LL
Price: $499.00 (USD) 
Direct Ship
Quantity:   
Chase Bays hydraulic Handbrake Brake Line Kit - E36

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into the E36. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak free and safe operation.

*For use with factory rear calipers

Chase Bays
Part #: E36-OEMC/HB
Price: $149.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Brake Line Relocation - E36

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

Fits The Following

E36' s with build date from  09/1994

*For use with OE Master cylinder only

 

Chase Bays
Part #: CB-BMW-E36OEMC
Price: $349.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Brake Line Relocation - E36

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

Fits The Following

E36' s with build date up to from 09/1994

*For use with the Chase Bays Brake booster eliminator kit only.

Chase Bays
Part #: CB-BMW-E36BBE
Price: $299.99 (USD) 
Direct Ship
Quantity:   
AR Design Burnout Perfection Line Lock Kit E82 E90 E92 135i 335i M3

Do you want to do burnouts without having to worry about messing with the break pedal and clutch? The Burnout Perfection Line Lock Kit from AR Design can make doing burnouts much easier! Using two solenoids that lock up your front brakes only, all you have to do is give it some gas. This is great for when you need to warm up your tires at a track/strip or even just for fun and show.

This kit includes the following:

  • 2  line lock solenoids - rated to 3,000PSI and designed to withstand extreme temperatures
  • 2 custom mounting brackets
  • 2 sets of DOT-approved stainless brake lines
  • 2 brake fitting adapters
  • Needed wiring to connect to a switch.
AR Design
Part #: AR-01-04006
Price: $371.07 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Hydro Handbrake Brake Line Kit

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into the E30. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak free and safe operation.

 

For use with factory rear calipers

Chase Bays
Part #: E30-OEMC/HB
Price: $149.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Stainless-Steel Brake Line Set - E36 This brake line kit is for the enthusiast who wants to increase braking response, improve pedal feel, and upgrade to a more durable setup.
Chase Bays
Part #: BMW-940
Price: $99.99 (USD) 
In Stock
Quantity:   
MINI Cooper / Cooper S Stainless Steel Brake Line Set - 2002-2007 As Used on our Project Mini Cooper S
MINI Cooper / MINI Cooper S braided Stainless Steel 4 Pc. Brake Line Set - These lines are DOT approved and also feature a clear plastic outside coating. Replace those soft, inferior rubber brake hoses!

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These brake lines fit all 2002 to 2007 MINI Cooper and Cooper S. As there was a change to the braking system midway through the 2003 model year, you must select your build date below.
Turner Motorsport
Part #: PLBMINI-E
Price: $124.95 (USD) 
In Stock
F22, F30/F31/F32/F33/F34/F36 Stainless Steel Brake Line Set These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, and coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price. 

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age. 

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. 

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings. 
StopTech
Part #: PLBF30F32
Price: $99.00 (USD) 
In Stock
Quantity:   
Stoptech Stainless Steel Brake Lines - E90/E92/E93/E82 325i 328i 330i 335i 128i 135i As Used on Project E92 335i
These braided stainless steel lines for the 2006+ E9X 3 Series and 2008+ E82 1 series improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 6 brake lines as well as pre-installed grommets on the front for ideal fit.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2006+ E90 E92 E93 BMW 325i 328i 330i 335d 335i (Not Xi all will drive models)
2008+ E82 E88 BMW 128i 135i
StopTech
Part #: PLBE9X335i
Price: $124.95 (USD) 
Direct Ship
Quantity:   
E32 7 Series Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These lines fit all 1988-1994 BMW 7 Series (E32). They will fit all 735i, 735il, 740i, 740il, 750i, and 750il that are a model year 1988, 1989, 1990, 1991, 1992, 1993, or 1994.

Turner Motorsport
Part #: PLB533106D-E32
Price: $124.95 (USD) 
In Stock
Quantity:   
E9X M3 Stoptech Stainless Steel Brake Lines (2008+ E90/E92 M3)
These braided stainless steel lines for the 2008 and newer E9X M3 improve the performance and safety of your M3's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. They fit all 2008, 2009, 2010 (and newer) BMW M3 V8. Each set includes 6 brake lines as well as pre-installed grommets on the front for ideal fit.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2011 E82 BMW 1M Coupe
2008-2013 E90 M3 sedan
2008-2013 E92 M3 coupe
2008-2013 E93 M3 convertible
StopTech
Part #: PLBE9XM3
Price: $124.95 (USD) 
Direct Ship
Quantity:   
Stoptech Stainless Steel Brake Lines - E60 5 Series E63 6 Series These braided stainless steel lines for the BMW E60 M5 and E63 M6 improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 4 brake lines - 2 front and 2 rear - as well as pre-installed grommets on the front for ideal fit.

Stoptech▒ Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech▒ brake lines consist of a PTFE (commonly referred to as Teflon▒) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
2004-2010 E63 BMW 645ci 650i M6
StopTech
Part #: PLBE60M5
Price: $124.95 (USD) 
In Stock
Quantity:   
E46 Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, and coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
StopTech
Part #: PLBE46M3DCOAT
Price: $124.95 (USD) 
Back Ordered, Contact Us
Quantity:   
E46 325xi/330xi Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, and coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
2001-2005 E46 BMW 325xi 330xi
StopTech
Part #: PLBE46XICOAT
Price: $124.95 (USD) 
Direct Ship
Quantity:   
MZ4 M Roadster / M Coupe Stainless Steel Brake Lines These stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake modulation.. Kit consists of part #'s 950.34001 and # 950.34523. The brake lines consist of a Teflon® inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The stainless steel braid provides support for the Teflon and the weave is extremely durable against incidental impact and abrasion. These brake lines feature a Clear Abrasion Resistant Cover for maximum protection against chaffing. They are DOT approved, 100% tested to a pressure of 4500 psi, and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
2006-2008 Z4 BMW Z4 M Roadster M Coupe
StopTech
Part #: PLBZ4M
Price: $124.95 (USD) 
In Stock
Quantity:   
E36 318ti 6pc. Stainless Steel Brake Line Set 318ti 6pc. Stainless Steel Brake Line Set - These lines are DOT approved and also feature a clear plastic outside coating.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
1994-1998 E36 BMW 318ti
StopTech
Part #: PLB318TI
Price: $124.95 (USD) 
Direct Ship
Quantity:   
E34 5 Series (Incl. M5) Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These lines fit all 1989-1995 BMW 5 Series (E34). They will fit all 525i, 530i, 530i, 540i, and M5 models (sedan and wagon) that are a model year 1989, 1990, 1991, 1992, 1993, 1994 or 1995.

Turner Motorsport
Part #: PLB533106D-E34
Price: $124.95 (USD) 
In Stock
Quantity:   
Chase Bays Stainless-Steel Brake Line Set - E30 This brake line kit is for the enthusiast who wants to increase braking response, improve pedal feel, and upgrade to a more durable setup.
Chase Bays
Part #: BMW-911
Price: $99.99 (USD) 
Direct Ship
Quantity:   
Hydro Handbrake Brake Line Kit

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into the E46. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak fr

For use with factory rear calipers

Chase Bays
Part #: E46-OEMC/HB
Price: $149.99 (USD) 
Direct Ship
Quantity: