Find Parts That Fit Your Vehicle

ARM Motorsports BMW Intake Parts

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

ARM FMIC Hose Upgrade
ARM FMIC Hose Upgrade
Requires ARM Intercooler AND Charge Pipe
ARM Motorsports - Corporate Logo
T#:1887218
Part#: E90HU
In Stock
$127.00
Free Shipping
$127.00
Free Shipping
The ARM Motorsports' FMIC Hose Upgrade has been designed to work with their 5"/7" intercoolers in conjunction with their charge pipes to eliminate restrictions in the factory intake! This upgrade replaces the small hose on the hot side of the turbo outlet to the intercooler, and the long hose on the cold side from the intercooler to the charge pipe. This hose upgrade has a full 3" construction, and when combined with their 3" charge pipes increases the diameter that air has to travel through by 50 percent! Highlights: Faster Spool Increased Overall Airflow Direct Fit Constructed with 5 layers of extra-durable, high-temperature silicone, the ARM FMIC Hose Upgrade has been tested to hold over 30psi. Whether you're running a stock turbo N54 or N55 at 22psi or even upgraded turbo/s at 27psi, the ARM FMIC Hose upgrade is able to withstand even the most demanding applications. In addition to the the size and durability of the hoses, one of the biggest improvements you will see with the ARM FMIC hose upgrade is the single-piece construction on both sides of the intercooler. This will give the charged air flowing from the turbo/s in your N54 or N55 powered BMW one uninterrupted pathway from the turbos to the intercooler and from the intercooler to the charge pipe. Being constructed of a single piece minimizes the turbulence caused by connection points between hoses and piping. Combined with our N54/N55 Charge Pipe Upgrade, your BMW will have full 3” piping from the intercooler cold side all the way to the throttle body. The hot-side hose is sized at 2.5” to match up with the OEM turbo outlet size and expands to 3.25” ID to fit up to the ARM FMIC. The cold-side hose is also 3.25” at the intercooler and reduces slightly to a 3” ID which is maintained all the way to the charge pipe. With the ARM cold-side hose being one solid piece, it removes two connections in the middle of piping found on most other N54/N55 intercooler piping upgrades. Every connection brings with it a small disruption in airflow, the severity of the turbulence varying depending on the characteristics of the connection. Removing these extra connections in the intercooler piping system improves the transition of air flowing from the intercooler to the charge pipe. **NOTE** This upgrade requires the use of ARM's 5" or 7" Front Mount Intercooler as well as their N55 or N54 Charge Pipe.
Show More Show Less
ARM 3" Charge Pipe - N55
ARM Motorsports - Corporate Logo
T#:1856015
Part#: E90CPN55
In Stock
$167.00
Free Shipping
Why do you need a charge pipe for your N55? The OEM BMW charge pipe is a ticking time bomb for any N55 running higher than stock boost. The factory plastic pipe will adequately hold the boost on stock settings, but on tuned cars its failure is inevitable. Don't wait until your stock charge pipe breaks to upgrade this critical component of your N55! Features: Handles High Boost Dual Meth / Nitrous Bungs Complete with Hoses and Hardware Leak Free Seal 3" Construction The ARM Motorsports N55 charge pipe is designed to handle the highest levels of boost. Constructed of 6061 aluminum, the ARM N55 charge pipe connects to the throttle body using a precision CNC machined connection which is secured by the OEM metal C-Clip. It also includes an upgraded O-Ring for a secure and leak-free seal. The ARM N55 Charge Pipe is engineered to optimize airflow between the intercooler and the throttle body. To further increase the performance of your N55, there are two hookups for either methanol or nitrous which come pre-capped. For reconnecting your factory TMAP sensor, there is a CNC machined flange for perfect fitment with new bolts to replace the course threaded factory screws. This charge pipe has been designed to fit the stock intercooler or any aftermarket intercooler that bolts directly to the stock charge pipe.
Show More Show Less
ARM Charge Pipe Upgrade Kit - F3X N55 - RWD
ARM Motorsports - Corporate Logo
T#:1965142
Part#: F30CPRWD
In Stock
$187.00
Free Shipping
Similar to the E90, the F3X chassis suffers from its plastic charge pipes cracking and leaving you stranded, even on stock power. The ARM motorsports F3X charge pipe is constructed of mandrel bent T6061 aluminum for smooth transitions and minimal weld points. The throttle body and intercooler connections are CNC machined to ensure a precise and reliable seal. These connections ensure that all of the boost your turbo is making reaches the engine. Highlights: Built for High Boost Applications Aluminum Construction CNC Machined TB + IC Connections Methanol / Nitrous Ready (1/8" NPT) Fits FMIC's with OEM Connections Fits Both Manual And Automatic Transmissions Complete with Hoses and Hardware Kit Includes: N55 Charge Pipe - Upper Section N55 Charge Pipe - Lower Section Silicone Coupler Meth Bung Cap Throttle Body O-Ring T-Bolt Clamps AT Vent Cap (used on MT cars only)
Show More Show Less

ARM Charge Pipe - N54 - TiAL BOV Flange
ARM Motorsports - Corporate Logo
T#:1965132
Part#: E60CPTIAL
In Stock
$167.00
Free Shipping
Why upgrade the charge pipe on your N54? The factory plastic N54 charge pipe is a known weak point and will inevitability fail, especially when running more than stock boost. Don't wait until your stock charge pipe leaves you stranded to upgrade to this upgraded aluminum charge pipe from ARM Motorsports! Features: 50mm TiAL Q BOV Flange Dual Methanol/Nitrous Bungs Handles High Boost Applications Includes Hoses and Hardware Leak-Free Throttle Body Seal Full 3" Construction The ARM Motorsports N54 charge pipe with the TiAL flange is designed to handle the highest levels of boost. Constructed of T6061 aluminum, the ARM N54 TiAL charge pipe connects to the throttle body using a precision CNC machined connection which is secured by the OEM metal C-Clip. It also includes an upgraded O-Ring for a secure and leak-free seal. The ARM N54 TiAL Charge Pipe is engineered to optimize airflow between the intercooler and the throttle body. To further increase the performance of your N54, there are two hookups for either methanol or nitrous which come pre-capped. For reconnecting your factory TMAP sensor, there is a CNC machined flange for perfect fitment with new bolts to replace the course-threaded factory screws. The ARM N54 TiAL Charge Pipe has an integrated blow-off valve flange designed for the 50mm TiAL Q BOV (BOV sold separately). Most importantly, it will ensure that all of your boost makes it into the engine to maximize power output. Fits stock intercooler as well as any aftermarket intercooler that bolts directly to the stock charge pipe. Includes: ARM N54 Charge Pipe with flange for 50mm TiAL Q BOV Upgraded Throttle Body O-Ring Silicone Elbow Methanol/Nitrous Bungs Hardware Kit
Show More Show Less

ARM J Pipe - S55
ARM Motorsports - Corporate Logo
T#:1887238
Part#: S55JPIPE
Ships by Jan 28, 2022
$147.00
Free Shipping
Complete the S55 charge piping puzzle with the ARM S55 J Pipe! This is the last piece of piping before the charged air enters the throttle body making it a weak point for the factory plastic components. This upgraded charge pipe is constructed of T6061 aluminum and includes multiple features that outclasses it from other charge pipes. An integrated locking C-clip takes the place of the factory components that requires a single use plastic strip to retain the charge pipe, creating a much stronger connection to the throttle body that is easy to disassemble. Highlights: Full Aluminum construction Secure Throttle Body Connection 2x Methanol/Nitrous Injection Ports Direct Replacement Fit Included with the ARM S55 J Pipe are two pre-plugged 1/8 NPT fittings which allows for post-intercooler methanol or nitrous injection. This is the preferred location of injection for many S55 tuners. J-Pipes with only one methanol port are not able to supply a sufficient amount of methanol for advancing the timing enough to make any substantial power increases. For reinstalling your S55 vacuum line, the ARM J Pipe has a precisely machined vacuum line connection port to prevent any leaks, a common issue on many other S55 J Pipes. Kit Includes: ARM S55 J Pipe Intercooler to J Pipe Silicone Hose Throttle Body Retaining C-clip Replacement O-ring Hose Clamps
Show More Show Less
ARM N54 Dual Cone Intake
ARM Motorsports - Corporate Logo
T#:1887247
Part#: N54DCI
In Stock
$117.00
Free Shipping
The ARM Motorsports N54 Dual Cone Intake allows you to easily add up to 20whp to your N54 335i by replacing the bulky OEM N54 intake with two open, high-flow dry media filters. Highlights: Gains of up to 20whp Improved turbo spool Increased turbo sound Fast and reversible installation
Show More Show Less

ARM Charge Pipe - N54 - OEM Diverter Valves
ARM Motorsports - Corporate Logo
T#:1856017
Part#: E90CPOEM
In Stock