Packaged by Turner BMW Cooling Overhaul Kits

The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat. 
 

Kit includes:

• Mahle-Behr thermostat
• Pierburg water pump
• Genuine BMW coolant
• Mounting hardware required for both the thermostat and water pump

This item fits the following BMWs: 
2014+ F22 BMW 228i 228i xDrive 
2014+ F23 BMW 228i 228i xDrive 
2012+ F30 BMW 328i 328i xDrive - Sedan 
2013+ F31 BMW 328i xDrive - Wagon 
2013+ F32 BMW 428i 428i xDrive - Coupe 
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible 
2014+ F34 BMW 328i xDrive GT - Gran Tourismo 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 
2012+ F10 BMW 528i 528i xDrive 
2011+ F25 BMW X3 xDrive28i 
2015+ F26 BMW X4 xDrive28i 
2009+ E89 BMW Z4 sDrive28i

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

The water pump is a known weak point across all BMW models, requiring servicing every 60,000 miles. Along with the water pump, it’s wise to replace the thermostat to ensure your cooling system operates at peak efficiency.

This kit features a 90°C (194°F) thermostat from Hamburg Technic, which opens approximately 15°C earlier than the standard factory thermostat. This lower temperature is particularly advantageous for performance-focused applications.

What's Included:

Genuine BMW Mechanical Water Pump Assembly (11517846361) Hamburg Technic Performance Thermostat - 90°C/194°F (11537586885) Genuine BMW Coolant/Antifreeze - Diluted, 1 Gallon (82141467704) Benefits of a Lower Thermostat Temperature:

Enhanced Engine Cooling: Opens sooner to reduce engine temperature more effectively. Improved Performance: Keeps engine components cooler, allowing for better performance in high-stress conditions. Extended Engine Life: Reduces thermal stress on engine parts, promoting longevity. Prevents Overheating: Helps to avoid overheating in demanding driving scenarios. Optimized Fuel Efficiency: Maintains ideal engine temperature for efficient fuel combustion. Elevate your BMW's cooling system and performance with this expertly curated kit from Turner Motorsport.

Due to weak rubber and plastic construction, vital cooling system parts are prone to premature failure. Key components, such as radiator hoses, the thermostat, and the expansion tank are particularly prone to cracks, leaks, and catastrophic failure, which can lead to overheating and potentially severe engine damage. Fortunately, our team of experts has assembled this kit of high-performance alternatives and high-quality OE replacement components, both tailored to safeguard your cooling system from failure and increase cooling system capability.

Our Level 3 High-Performance Cooling System Service Kit is the ultimate solution for ensuring long-term reliability and enhanced cooling performance. Each component in this comprehensive kit has been carefully selected by our team of enthusiasts to address common failure points and provide a robust, performance-oriented upgrade for your vehicle. By replacing aging factory parts with premium, high-performance alternatives, you’ll optimize cooling efficiency and safeguard your engine from the stress of overheating.

Our all-inclusive "Level 3" High-Performance Cooling System Service Kit includes:

CSFxTurner Performance Triple-Pass Aluminum Radiator Turner Motorsport Heavy Duty Aluminum Expansion Tank ECS Silicone Radiator Hoses ECS Aluminum Water Pump Pulley Wahler Thermostat (80°C) Bremmen Aluminum Water Pump Bremmen Parts Auxiliary Fan Switch Continental Accessory Belt ECS Kevlar-Reinforced A/C Compressor Drive Belt Genuine BMW Water Pump O-Ring Genuine BMW Water Pump Bolts Genuine BMW G48 Antifreeze (1 Gallon) Redline Water Wetter Performance Coolant Additive (12 oz.)

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Mahle-Behr thermostat
• Geba water pump
• Vaico coolant
• Mounting hardware required for the water pump
• O-rings for the thermostat housing

This item fits the following BMWs:
2005+ E60 BMW M5
2005+ E63 BMW M6

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

BMW vehicles are known for their robust performance, but the water pump is a notorious weak spot, often needing replacement every 60,000 miles.

During this service, it's wise to also swap out the thermostat to maintain the efficiency of your vehicle's cooling system. Turner Motorsport simplifies this process with our expertly curated Water Pump & Thermostat Replacement Kit.

This premium kit centers around the renowned EMP Stewart high-performance water pump--a favorite among BMW enthusiasts for its exceptional design. Featuring a stainless steel impeller, this pump enhances coolant flow by 20%. Complementing this is a low-temperature 68°C (154.4°F) Mishimoto thermostat, an upgraded aluminum thermostat housing, and Redline Water Wetter coolant additive. Together, these components make for the ultimate cooling system upgrade for your E36, E39, or Z3!

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E83 with the M54 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• OEM Wahler Thermostat
• OEM VDO Electric Water Pump
• Genuine BMW Antifreeze/Coolant
• OEM VDO Mounting hardware required for both the thermostat and water pump

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Genuine BMW Thermostat
• OEM Pierburg Electric Water Pump
• Genuine BMW Antifreeze/Coolant
• OEM Mounting hardware required for both the thermostat and water pump

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Genuine BMW Thermostat
• OEM VDO Electric Water Pump
• Genuine BMW Auxiliary Water Pump
• Genuine BMW Antifreeze/Coolant
• OEM Mounting hardware required for both the thermostat and water pump