Turner E9X M3 Skid Plate

Clear BMW chassis

Please ensure your correct model is selected

Damaged belly pan? We've been there. At long last, our engineers have boldly addressed an Achilles' heel of this performance beast: the belly pan. The lowest point of the car, the OE belly pan ends up being an easy target for curb stops, inclines, and road (or track) debris. The fiber material used in construction of the factory piece make it lightweight, but at the cost of very limited durability. With delicate engine components being mere inches away (including the oil cooler), our heavy duty skid plate should be on every M3 owner's install list.

Turner Aluminum Skid Plate - E9x M3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
T#:395281
Part#: 021807TMS03
Ships on Aug 26, 2026
$ 877.99 USD
Free Shipping
$ 877.99 USD
Free Shipping
*Click here for installation instructions.* The E9x M3 belly pan is a constant point of impact for parking curbs, inclines, and road debris. Fortunately, there is usually little damage other than the brittle belly pan plastic and side covers which is still not a cheap expense. The Turner Motorsport skid plate is the ultimate upgrade for your belly pan replacement woes, simply being the final replacement for nearly the same cost as the plastic OE replacement. Turner made a decision to move forward with a black powder coat finish so the skid plate blends in close to the OE look and stays looking good under normal wear. Even though things look similar there are a lot of features taken into consideration when this was designed. The plates mount slightly higher offering even more ground clearance, so there is less chance of impact even though the this skid plate will provide all the strength you need to feel safe. Manufactured from 3/16" 5052 Aluminum at the center plate and 1/8" thick aluminum side plates fastened to the M3 with 1018 steel brackets that perfectly integrate with the factory liners and mounting points. When installing this skid plate there is zero modification required to mount this to your car making this upgrade completely reversible if desired. Watch to learn more about Turner E9x M3 Skid Plate Installation All components are protected using wrinkle black powder coat finish to maintain a sleek appearance and protect against corrosion. Includes new stainless steel hardware. Kit contents: 3/16” thick aluminum main plate and 1/8” thick aluminum side plates 1018 powder coated steel tube support braces for maximum skid plate strength Retains factory air duct for oil cooler Maintains wheel liner mounting positions Contains all necessary stainless mounting hardware and components (OE rubber trim from the vent will need transferred) No modification necessary; easy to convert back to stock Made in America For replacement hardware, refer to T#393358
Show More Show Less
Delrin bumper protection Skid Plates - 11" - E9x M3 - (NO LONGER...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
T#:395656
Part#: 013770TMS01KT
No longer available
No longer available

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade. 

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Show More Show Less
Delrin bumper protection Skid Plates - 12.5"
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
T#:395767
Part#: 013770TMS02KT
Ships on Oct 14, 2026
$ 330.99 USD
Free Shipping
$ 330.99 USD
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade.

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Show More Show Less

Delrin Carbon Splitter Skid Plates - 17"
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
T#:395761
Part#: 013770TMS03KT
Ships in 4 Business Days
Sale - Save 3% $ 236.99

This product was last offered at the strikethrough price on
05-03-2026

$ 229.88 USD
Free Shipping
Sale - Save 3%
$ 236.99

This product was last offered at the strikethrough price on
05-03-2026

$ 229.88 USD
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with the carbon fiber splitter upgrade. 

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Show More Show Less

Delrin Carbon Splitter Skid Plates - 18.5"
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
T#:395751
Part#: 013770TMS04KT
Ships in 4 Business Days
$ 195.99 USD
Free Shipping
$ 195.99 USD
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with the carbon fiber splitter upgrade. 

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

Show More Show Less