013277TMS03 - Turner Motorsport Front Control Arm Bearing Upgrade - Pre-Installed - E9x 325i, 328i, 330i, 335i/is RWD - (NO LONGER AVAILABLE)
Turner Motorsport Front Control Arm Bearing Upgrade - Pre-Installed - E9x 325i, 328i, 330i, 335i/is RWD - (NO LONGER AVAILABLE)
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.
For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, E83, and F8x M2/M3/M4 owners similar levels of handling precision and control for the track and street.
The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.
In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.
Sealed spherical ball joint for long service life.
OE fitment.
Does not require vehicle to be at ride height to be torqued to spec.
Performance Benefits:
Very streetable, quieter than poly with minimal NVH.
Improved steering feel and cornering response
Reduced friction over OE rubber bushing with no unwanted deflection under cornering and braking forces.
Does not require vehicle to be at ride height to be torqued to spec.
This item fits the following BMWs: 2008-2012 E82 BMW 128i 135i 2006-2011 E90 BMW 325i 328i 330i 335i - Sedan 2006-2011 E91 BMW 328i - Wagon 2007-2012 E92 BMW 328i 335i 335is - Coupe 2007-2012 E93 BMW 328i 335i - Convertible
BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.
For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, E83, and F8x M2/M3/M4 owners similar levels of handling precision and control for the track and street.
The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.
In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.
Sealed spherical ball joint for long service life.
OE fitment.
Does not require vehicle to be at ride height to be torqued to spec.
Performance Benefits:
Very streetable, quieter than poly with minimal NVH.
Improved steering feel and cornering response
Reduced friction over OE rubber bushing with no unwanted deflection under cornering and braking forces.
Does not require vehicle to be at ride height to be torqued to spec.
This item fits the following BMWs: 2008-2012 E82 BMW 128i 135i 2006-2011 E90 BMW 325i 328i 330i 335i - Sedan 2006-2011 E91 BMW 328i - Wagon 2007-2012 E92 BMW 328i 335i 335is - Coupe 2007-2012 E93 BMW 328i 335i - Convertible
Prop 65 Warning
Cross Reference
31122405859
31126770849
31122405860
31126770850
Product Q&A
Lifetime Replacement
This product is not eligible for Lifetime Replacement