BMW Tools & Specialty Equipment for BMW E12 530i M30 3.0L

*Features a total lift height of almost 29 inches!*

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK13HLQ Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 in
• Wide and robust frame made of high-strength steel
• Fitted with quick-lift pedal for easy reach of lifting point
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation

Specifications:

• Capacity:  2900 lb 
• Min. height:  3.15 in 
• Max. height:  28.94 in 
• Frame length:  37.01 in 
• Handle length:  37.40 in 
• Frame height:  6.30 in 
• Width:  18.90 in 
• Weight:  86 lb

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.

Key Features:

• 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
• Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
• Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
• Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
• Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.

Includes:

• Borescope Camera
• Android Adapter
• Lightning Port Adapter
• USB Type-C Connector
• 16.4 ft. Semi-Rigid Cable
• Magnet
• Hook
• Mirror
• Protective Cap
• Manual

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20Q Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 inches
• Wide and robust frame made of high-strength steel
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation
• DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Specifications:

• Capacity:  4400 lbs
• Min. height:  3.15 inches
• Max. height:  19.49 inches
• Frame length:  25.98 inches 
• Handle length:  37.40 inches
• Frame height:  6.30 inches 
• Width:  16.14 inches
• Weight:  68 lbs

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

• Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
• Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
• Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
• Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 10" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 12" height.

Simplify can storage and transport with AGA Magnetic Can Holders. These holders attach securely to metal surfaces with strong magnets and come in both large (62mm) and small (45mm) sizes. Perfect for service shops or home projects, they help keep your workspace organized and efficient.

Key Features

• Fits Larger Cans: 62mm diameter to fit silicone cans, lubricant cans, etc.
• Color-Coded Clips: Set includes five clips in different colors
• Strong Magnetic Hold: Ensures secure attachment to metal surfaces
• Portable and Versatile: Ideal for DIYers and professionals

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Simplify can storage and transport with AGA Magnetic Can Holders. These holders attach securely to metal surfaces with strong magnets and come in both large (62mm) and small (45mm) sizes. Perfect for service shops or home projects, they help keep your workspace organized and efficient.

Key Features

• Fits Smaller Cans: 45mm diameter to fit silicone cans, lubricant cans, etc.
• Color-Coded Clips: Set includes five clips in different colors
• Strong Magnetic Hold: Ensures secure attachment to metal surfaces
• Portable and Versatile: Ideal for DIYers and professionals

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

For some of the best bottle jacks in production, stick with AC Hydraulic.  Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

Features:

• 5 models with lifting capacities from 26,500 - 66,000 lb
• With extension screw for optimal use of the stroke
• Jack can be used in horizontal position, as long as the pump piston is placed under the jack
• Fitted with practical carrying handle for easy transport

Specifications:

• Capacity: 26,500 lb
• Min height: 9.06 in
• Hydraulic lift: 6.30 in
• Extension screw: 4.33in
• Max height: 19.69 in
• Bevelled base: Yes

For some of the best bottle jacks in production, stick with AC Hydraulic.  Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

Features:

• With extension screw for optimal use of the stroke
• Jack can be used in horizontal position, as long as the pump piston is placed under the jack
• Fitted with practical carrying handle for easy transport

Specifications:

• Capacity: 11,000 lb
• Min height: 8.27 in
• Hydraulic lift: 5.91 in
• Extension screw: 3.94 in
• Max height: 18.11 in
• Bevelled base: No

The Hand Hydraulic Junior Press is a versatile and efficient solution for passenger car workshops and light industrial applications. Its compact design and innovative features make it an essential addition for precision pressing tasks.

Features:

• Efficient Operation: Foot-operated pneumatic control ensures high-speed, precise ram movement for seamless approach to the workpiece.
• Versatile Ram Design: A traversing ram with a removable end cap allows for the easy mounting of various piston heads to suit specific applications.
• Durable Vee Blocks: Includes two vee blocks for added support and stability during pressing operations.

Specifications:

• Capacity: 35,000 lb
• Stroke: 5.91 in
• Height: 63.78 in
• Width: 34.84 in
• Width between legs: 25.20 in
• Depth between legs: 5.12 in
• Clearance: 4.13-30.71 in
• Weight: 287 lb

Features:

• Fastener Type: Fits 3/32" through 3/16" steel and aluminum & up to 5/32" stainless steel rivets

Includes:

• HP-2 Rivet Gun Tool
• 50 x SB4-2 (1/8") (.063-.125" Grip Range) (Steel) Klik-Fast Rivets
• 50 x SB4-4 (1/8") (.188-.250" Grip Range) (Steel) Klik-Fast Rivets
• 50 x AB4-2A (1/8") (.063-.125" Grip Range) (Aluminum) Klik-Fast Rivets
• 25 x SC4-4 (1/8") (.188-.250" Grip Range) (Steel with Zinc Clear Trivalent) Klik-Fast Rivets
• 25 x AB6-2 (3/16") (.063-.125" Grip Range) (Aluminum) Klik-Fast Rivets
• Molded Plastic Case