Vehicle Lifts, Jacks, and Ramps for BMW E12 530i M30 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Quick Jack lifting equipment turns wherever you are into a competent repair shop. Their portable lifting solutions make raising your BMW effortless at home or on the track. Stop fiddling with ramps, floor jacks, and jack stands and start lifting your car with ease. All Quick Jack lifting products are located on this page to start making BMW service simple and easy.

Sub-Categories

Sort By:

Jack Stand Adapters - Medium - Pair
For models that use rectangular plastic lift point inserts
Forsvara Engineering - Corporate Logo
T#:19593929
Part#: FV0102
Ships in 4 Business Days
$ 59.99 USD
Free Shipping on orders $49 and up
$ 59.99 USD
Free Shipping on orders $49 and up
Be safe when working with jack stands and use these adapters! Will work with MINI, BMW, and Supra jack points.
RennStand - Corporate Logo
T#:48367004
Part#: RST-PAD-HPUCK-V1
In Stock
$ 29.99 USD
Free Shipping on orders $49 and up
Designed specifically to work with the RennStand Jack Stand (18M-RS3), RennStand's new Puck Pad (Patent Pending) will hold a standard NHL hockey puck (not included) and is for those DIYers who prefer to place a hockey puck on their jack saddles to prevent damage to their jacking points. Now your RennStand gives you the same benefit while you lift and support your vehicle at the factory-designated jacking point.
Show More Show Less

RennStand - Corporate Logo
T#:6811813
Part#: 18MRS3
In Stock
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
RennStand is the first and only vehicle safety stand with usable height adjustment that allows you to put your jack and safety stand at the same point under your vehicle

Forsvara Engineering - Corporate Logo
T#:19593928
Part#: FV0103
Ships in 4 Business Days
$ 68.99 USD
Free Shipping on orders $49 and up
Be safe when working with jack stands and use these adapters! Will work with MINI, BMW, and Supra jack points.
RennStand - Corporate Logo
T#:48367006
Part#: 18MP05
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Designed specifically to work with the RennStand Jack Stand (18M-RS3), RennStand's Castle Pad is a miniature version of a low profile jack saddle, meant to allow the RennStand's crossbar to essentially be an extenion of your jack, so if you typically lift your vehicle using your jack without any specific pad on its saddle, then this is the pad for you.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 3 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less

RennStand - Corporate Logo
T#:6811809
Part#: 18M-RS3KT2
In Stock
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping

RennStand - Corporate Logo
T#:6811812
Part#: 18MP04
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Used with RennStand Jack stand to safely support vehicle's.
Burger Motorsports - Corporate Logo
T#:26438196
Part#: BMWJACKPADSILR4
Ships in 2 Business Days
$ 77.99 USD
Free Shipping on orders $49 and up
Race Ramps - Corporate Logo
T#:641873
Part#: RR-RC-5
Ships on Oct 2, 2026
$ 58.99 USD
Free Shipping on orders $49 and up
12" racer chock – ultimate tire grip


Race Ramps - Corporate Logo
T#:2438599
Part#: RR-WS-14
Ships on Oct 2, 2026
$ 376.99 USD
$ 376.99 USD
Designed as an alignment stand, this set of two wheel stands can also be used for car display stands in showrooms or at shows.
AGA Tools - Corporate Logo
T#:30828076
Part#: AGA-JR-8-14-3.5
Ships in 8 Business Days
$ 109.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Jack Rod Stand.
Race Ramps - Corporate Logo
T#:2438592
Part#: RR-WC-12-2
Back Ordered
$ 264.99 USD
Free Shipping
$ 264.99 USD
Free Shipping
Safer than jack stands and far more attractive, our multi-purpose 12-inch Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility.

Schwaben by Race Ramps - Corporate Logo
T#:363130
Part#: 006182SCH01A
In Stock
$ 232.99 USD
Free Shipping
$ 232.99 USD
Free Shipping
  • Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
  • 12" height X 12" width with minimal compression under load
  • Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
  • Curved cradle for the tire to sit inside
  • Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

Show More Show Less

Forsvara Engineering - Corporate Logo
T#:19560880
Part#: FV0402
Ships in 4 Business Days
$ 73.00 USD
Free Shipping on orders $49 and up
Be safe when working with jack stands and use these adapters! Will work with pinch weld jack points.
Forsvara Engineering - Corporate Logo
T#:19560878
Part#: FV0401
In Stock
$ 70.00

This product was last offered at the strikethrough price on
08-23-2026

$ 64.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 70.00

This product was last offered at the strikethrough price on
08-23-2026

$ 64.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Be safe when working with jack stands and use these adapters! Will work with pinch weld jack points.

RennStand - Corporate Logo
T#:6811806
Part#: 18M-RS3KT
In Stock
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
RennStand is the first and only vehicle safety stand with usable height adjustment that allows you to put your jack and safety stand at the same point under your vehicle

Powerflex - Corporate Logo
T#:5122259
Part#: PF99-1000
Ships in 2 Business Days
$ 24.99 USD
Free Shipping on orders $49 and up

AGA Tools - Corporate Logo
T#:5175707
Part#: AGA-JR-8-14
Ships in 8 Business Days
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping
Turn a tradition jack into a jack stand as well.
Performance Tool - Corporate Logo
T#:1809155
Part#: W41021
Ships in 2 Business Days
$ 59.99 USD
Free Shipping on orders $49 and up
Ratchet style for easy adjustments.
Race Ramps - Corporate Logo
T#:642114
Part#: RR-TJ-S
Special Order: No Guaranteed ETA
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Trak-Jax ramps were inspired by an auto-crosser who didn't want to buy a new high-priced, low-profile jack just to change his tires at the track. Lightweight and portable, they go where you go.


Race Ramps - Corporate Logo
T#:641842
Part#: RR-CC-10
Ships on Oct 2, 2026
$ 463.99 USD
Free Shipping
$ 463.99 USD
Free Shipping
10" lift height crib cruisers
AGA Tools - Corporate Logo
T#:42638594
Part#: AGA-JR-8-14-DL
Ships in 8 Business Days
$ 139.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Dual Lever Jack Rod Stand, a new Jack Rod Stand variant designed for commercial use that will fit most floor jacks.
Race Ramps - Corporate Logo
T#:641850
Part#: RR-EX-14
Ships on Oct 2, 2026
$ 169.99 USD
$ 169.99 USD
xtenders for 67" race ramps – 6.6 degree approach angle

Race Ramps - Corporate Logo
T#:641869
Part#: RR-RACK-5
Ships on Oct 2, 2026
$ 362.99 USD
$ 362.99 USD
5" cutout rack ramp - 8.6 degree approach angle

Schwaben by Race Ramps - Corporate Logo
T#:378235
Part#: 006181SCH01A
Special Order: No Guaranteed ETA
$ 214.99 USD
$ 214.99 USD
  • Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
  • 10" height X 12" width with minimal compression under load
  • Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
  • Curved cradle for the tire to sit inside
  • Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 12" height.

Show More Show Less
Forsvara Engineering - Corporate Logo
T#:19593930
Part#: FV0101
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
Be safe when working with jack stands and use these adapters! Will work with MINI, BMW, and Supra jack points.

Race Ramps - Corporate Logo
T#:2423582
Part#: RR-XT-2
Special Order: No Guaranteed ETA
$ 492.99 USD
$ 492.99 USD
Designed to work with low profile and lowered cars, 67-inch XT Race Ramps provide 10 inches of lift for better access to the underbody of your vehicle.
Race Ramps - Corporate Logo
T#:641848
Part#: RR-EX-12
Back Ordered
$ 179.99 USD
$ 179.99 USD
xtenders for 56" race ramps – 6.6 degree approach angle

Sunex - Corporate Logo
T#:385986
Part#: 6602LPD
Back Ordered
$ 704.99 USD
$ 704.99 USD
Designed to reach far under your vehicle with this long and low chassis

Race Ramps - Corporate Logo
T#:642108
Part#: RR-SCALE-2
Back Ordered
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
The next time you reach for your racing scales, hold back on the jack and instead reach for this set of two Scale Ramps. They will save you time setting up, and provide 2.5 inches of height to get your car ready for positioning on your racing scales.
Show More Show Less
Race Ramps - Corporate Logo
T#:557429
Part#: RRTJ
Back Ordered
$ 132.99 USD
Free Shipping
$ 132.99 USD
Free Shipping
Trak-Jax Ramps, Composite Foam, 3,000 lb. Capacity, 30.10 in. Length, 12 in. Width, 3 in. Height, Pair
Burger Motorsports - Corporate Logo
T#:31191904
Part#: BMWJACKPADBLUE2
Back Ordered
$ 35.00 USD
Free Shipping on orders $49 and up

BMW Jack Pad Blue - Pair provides a professional-grade solution for safely lifting your BMW. Designed to fit perfectly at the factory jack points, this metal jack pad adapter ensures that you can lift your BMW, 2020 Supra, or MINI without risking damage to the jack points, rocker panels, or undercarriage.

  • Safe Lifting: Designed for use at factory jack points to prevent damage.
  • Durable Construction: Made from solid billet aluminum for long-lasting performance.
  • Convenient Design: Easy to use with any floor jack, features a honeycomb grip pattern for stability.
  • Non-Damaging: Does not touch or harm painted surfaces.
  • USA Made: Crafted in the USA with precision and quality.

This jack pad adapter is a must-have tool for enthusiasts who want to lift their vehicles securely and correctly every time.

Show More Show Less


Race Ramps - Corporate Logo
T#:378244
Part#: RRFS
Back Ordered
$ 271.99 USD
$ 271.99 USD

Race ramps give you an easy way to get your car in the air without jacks or boards. Especially with lowered vehicles, Race Ramps allow you to get your car off the ground even when a jack won't fit under your pinch welds.

FlatStoppers® were developed to stop flatspots from forming on vehicles stored for longer than 30 days at a time. FlatStopper's concave depressions should be used on a flat surface to prevent tire flat spotting during storage - this disperses the weight of the car more evenly onto the tire.

  • Dimensions: 22.3" long x 3.5" high x 14" wide 
  • Will accommodate tires up to 12" wide
  • FlatStoppers® won't scratch or otherwise damage floors, and won't rust
Show More Show Less
Race Ramps - Corporate Logo
T#:641827
Part#: RR-30
Back Ordered
$ 146.99 USD
Free Shipping
$ 146.99 USD
Free Shipping
30" RALLY RAMPS - 5" lift for 8" wide tires
Race Ramps - Corporate Logo
T#:641829
Part#: RR-56
Ships on Oct 7, 2026
$ 301.99 USD
$ 301.99 USD
56" single piece race ramps - 10.8 degree approach angle

Race Ramps - 4" Car Lift Ramps
Made to order - ETA of 4-8 Weeks from order date
Race Ramps - Corporate Logo
T#:641846
Part#: RR-CLR-4
Back Ordered
$ 1,244.99 USD
$ 1,244.99 USD
4" car lift ramps – 3.9 degree angle approach

Race Ramps - Corporate Logo
T#:641838
Part#: RR-72-2
Back Ordered
$ 475.99 USD
$ 475.99 USD
72" race ramps – 6.8 initial to 10.8 final degree approach angle
Forsvara Engineering - Corporate Logo
T#:19593923
Part#: FV0403
In Stock
$ 78.99 USD
Free Shipping on orders $49 and up
Be safe when working with jack stands and use these adapters! Will work with pinch weld jack points.

OEM Tools - Corporate Logo
T#:1362398
Part#: OEM24852
Ships in 7 Business Days
$ 120.99 USD
Free Shipping
$ 120.99 USD
Free Shipping
Safe and secure for Garage use
Burger Motorsports - Corporate Logo
T#:54388468
Part#: BMWJACKPADRED1
Ships on Oct 5, 2026
New Item
$ 19.00 USD
Free Shipping on orders $49 and up
Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:54388469
Part#: BMWJACKPADRED2
Ships on Oct 5, 2026
New Item
$ 35.00 USD
Free Shipping on orders $49 and up
Lifting your BMW, MINI, or GR Supra should never involve crossing your fingers and hoping you don't crush a rocker panel. Plastic factory jack points are notorious for cracking under the flat, unforgiving surface of a standard floor jack. Stop damaging your car's undercarriage and lift like a pro with this Billet Jack Pad Adapter from Burger Motorsports.
Show More Show Less

Sunex - Corporate Logo
T#:386187
Part#: 1006D
Ships in 7 Business Days
$ 306.99 USD
$ 306.99 USD
These jack stands have steel base pads for superior stability
Race Ramps - Corporate Logo
T#:641862
Part#: RR-FS-16-SC
Ships on Oct 2, 2026
$ 342.99 USD
$ 342.99 USD
16" with flatstoppers car storage ramps - 4 PACK
Sunex - Corporate Logo
T#:385984
Part#: 6603ASJD
Ships in 7 Business Days
$ 720.99 USD
$ 720.99 USD
Need a light weight(under 60 Lbs) and heavy duty floor jack? This is the one for you


OEM Tools - Corporate Logo
T#:585148
Part#: OEM24836
Ships in 7 Business Days
$ 444.99 USD
$ 444.99 USD
Features a quick lift foot pedal
AGA Tools - Corporate Logo
T#:42638595
Part#: AGA-JR-14-24
Ships in 8 Business Days
$ 140.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Jack Rod Stand XL.