BMW Tools & Specialty Equipment for BMW 5 Series E28 (1982-1988)

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

The Foxwell TS5000 Tablet TPMS Service Tool is a mid-level tool designed to activate OEM/Universal TPMS sensors, retrieve comprehensive TPMS sensor data including sensor ID, tire pressure, temperature, battery condition, and OE part number. With the ability to relearn 98% of sensor IDs, program FOXWELL T10-sensors to replace old sensors, and even test Remote Keyless Entry Key Fobs, this tool offers a versatile solution for automotive professionals and enthusiasts alike.

Equipped with regular hardware and software updates, the Foxwell TS5000 Tablet TPMS Service Tool enables users to address automotive issues with enhanced precision and efficiency. It strikes the perfect balance between advanced TPMS diagnostic capabilities and affordability, making it the go-to choice for enthusiasts seeking top-notch performance without the usual high costs associated with TPMS tools.

Standout Features (How does it standout from previous models, i.e. the T1000/T2000?):

• Will allow you to connect to all sensors at once and view all of their data at the same time
• Can now program sensors by copying through OBD (eliminates need for relearn, see "Programming" in description for details)
• Wireless connection to OBD2 port
• Wireless updates (One Touch Update)
• Larger screen (5.5-inch screen, T2000 is 2.8-inch)
• Updated, larger hardware (32 GB RAM, 5V battery, now offers camera for VIN-reading)
• CAN FD support
• Print TPMS sensor data on PC

More Features:

• Activate 98% OEM/Universal TPMS sensors
• Programs FOXWELL T10 Sensors in 4 Different Ways: Copy by OBD, Copy by Activation, Copy Manually, and Auto Create Sensors
• 3 TPMS Relearning Methods: OBD Relearn, Automatic Relearn, and Stationary Relearn
• Fast Reading Sensor Data: Include sensor ID, tire pressure, temperature, battery, frequency, etc.
• Key Fob Testing Tool: Precisely test 315MHz and 433MHz key fobs to ensure whether it is perfectly running
• Read TPMS Live Data
• Basic Code Reading capabilities using OBDII
• Solid and Rugged Construction: Well-constructed with materials designed to handle harsh work environments
• Intuitive and Easy Instructions: Easy to navigate and operate with clear instructions and detailed user manual
• Free Software Updates for Life
• LIFETIME REPLACEMENT program

Programming:

With this TPMS programming tool, you can program FOXWELL T10 TPMS sensors (T2317833 or T2317834 ) to meet the specifications of a particular vehicle before new sensor installation and relearn. 4 different sensor programming methods are supported by the FOXWELL TS5000 TPMS Service Tool: Copy by Activation; Manual Create; Automatic Create. (Note: TS5000 will only program a replacement sensor if it is a FOXWELL T10 sensor, which can be easily found on our site.)

• Copy by OBD:
  • This method pulls the previously registered sensor ID through the vehicle's TPMS module using OBDII, and will then program the ID to the FOXWELL T10 sensor
  • This eliminates the need for a relearn by combining both steps into one
• Copy by Activation
  • If your original sensor works and can be activated. You could use this method to program a new sensor. It will clone the original ID to the new FOXWELL T10 sensor.
• Copy by Manual Input:
  • If you know the original sensor ID, you can input the ID to program new sensor.
• Auto Create Sensors:
  • If you don't know the original sensor ID or your original sensor was bad, you can choose this method. Install new sensor ID--> program new sensor--> perform TPMS learning and let the car recognize new sensor

Relearning:

The FOXWELL TS5000 TPMS Service Tool can be used as a professional TPMS relearn scanner, to relearn almost all known sensor IDs, which is compatible with 95% of vehicles equipped with TPMS and extremely popular among car repair ships and DIY car owners. To ensure compatibility with different vehicles, 3 types of TPMS sensor relearning are offered:

• OBD Relearn:
  • Usually the most effective relearn tactic, this will allow you to connect the TS5000 to your car wirelessly using the OBDII port and placing your vehicle in a relearn mode.
• Automatic Relearn:
  • For some vehicles, the “Relearn” function can be completed automatically by driving, which makes it quite easy to do a complete set of sensor replacement operations on your own. Be aware that this may require you to drive the vehicle at a certain speed for a designated amount of time for it to relearn.
• Stationary Relearn:
  • TS5000 allows the new TPMS sensor IDs to be transferred without driving a vehicle. You can trigger the sensors when the vehicle is in learn mode by our TPMS Tool TS5000. This will usually require a specific sequence created by the vehicle manufacturer as well, such as pressing the brake a few times, turning the key, etc.

Please note that some vehicles require a combination of these relearning methods, such as needing to drive for a designated amount of time after relearning using OBD. There may also be extra steps your manufacturer uses, so please research your specific vehicle when performing a relearn!

Note:

• Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. 
  • Pre OBDII vehicles will have limited feature availability
• We recommend purchasing a Bentley Manual to use with your TPMS Tool.
• You will need to register your TPMS tool in order to receive update notice's from Foxwell via E-mail
• Vehicles with 20 pin under hood connector will require T366829  for use 

Support:

For software and hardware support from Foxwell the address is http://www.foxwelltech.com/support/ - Make sure you use the correct address

For after sales issues please contact Nina at [email protected]. Please allow 48 hours for response.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

 Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

The Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set comprises two dozen 3/8-inch metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 63mm, the deep sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 24 Piece 3/8" Drive 6 Point Deep and Standard Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 63mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 8 mm - deep and standard socket
• 9 mm - deep and standard socket
• 10 mm - deep and standard socket
• 11 mm - deep and standard socket
• 12 mm - deep and standard socket
• 13 mm - deep and standard socket
• 14 mm - deep and standard socket
• 15 mm - deep and standard socket
• 16 mm - deep and standard socket
• 17 mm - deep and standard socket
• 18 mm - deep and standard socket
• 19 mm - deep and standard socket

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

• Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
• Special low profile thick frame side plates and reinforced lift arm for added strength and use.
• Wide track front wheels help provide chassis torsion control and durability.
• Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
• Ball bearing mounted rear swivel caster wheels for easy maneuverability.
• Side mounted handles for carrying and easy positioning.
• Overload and bypass safety valve prevents jack overload and over extension.
• Two piece quick release padded handle for storage or transport.

Details:

• Jack Capacity 2 Ton
• Max Lift Height 20"
• Low Height 3.25"
• Chassis Length 26.5"
• Overall Width 13"
• Saddle Diameter 4.5"
• Handle Lenght 50"
• Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

Features:

• Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
• Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
• Packaged in a handy molded case for portability and easy organization.

Introducing the TPMS Starter Kit! Dive into TPMS servicing with ease using the included TPMS service tool and four sensors. Plus, enjoy peace of mind with our LIFETIME REPLACEMENT program, ensuring this kit remains by your side for the long haul!

T2000 TPMS SERVICE TOOL:

The Foxwell T2000WF is a professional TPMS diagnostic and maintenance tool that can activate and decode universal TPMS sensors, program TPMS, and diagnose any OEM tire pressure monitoring system. Featuring updated hardware for quicker operation and all-new software for increased capability, the T2000WF provides a complete, full-service solution for owners of TPMS-equipped vehicles.

Key Features:

Sensor Activation and Decoding: The T2000WF can activate and read data from universal TPMS sensors, ensuring they function correctly.

Sensor Programming: Allows for programming TPMS sensors to replace faulty ones or install new sensors when needed.

System Diagnostics: This tool diagnoses the vehicle's TPMS to identify and troubleshoot issues within the system.

WiFi Connectivity: The 'WF' in T2000WF indicates WiFi capabilities, enabling wireless updates and seamless data transfer.

User-Friendly Interface: Designed with an intuitive interface to facilitate ease of use for technicians and automotive enthusiasts.

This tool suits automotive professionals and enthusiasts seeking a reliable solution for TPMS-related services. If you're in need of a comprehensive, full-service diagnostic tool for your Tire Pressure Monitoring System equipped vehicle, look no further than the Foxwell T2000WF.

METAL T20 TPMS SENSORS:

The Foxwell T20 TPMS sensor integrates both 315 MHz and 433 MHz frequencies, replacing more than 99% of OEM direct TPMS sensors on the market. The all-new, high-precision air valve prevents air leakage and provides a durable seal - an upgrade over the outgoing T10. Its proprietary sensor body features a long-lasting, lightweight 3V battery and supports unlimited wireless programming.

Features:

Rubber valve stem Supports 315MHz and 433MHz frequencies High-precision air valve to avoid air leakage 0-30° adjustability Built-in battery with an extended service life (more than 5 years) Temperature reading range of -40°F to 257°F Pressure monitoring range of 0 to 130.53 psi 12G weight