Advanced Auto Fabrication for BMW E30 M3 S14 2.3L

AAF HVAC Firewall Block Off Plate - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593086

Part#: 11618

Ships in 1 Business Day

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's own Heater Block Off Plate for E30 models. Stock heater boxes are often not needed on race cars, and this block off plate is a lightweight and stylish replacement. It is recommended to use silicone on the sealing surface to keep all engine fumes outside the cabin. Hardware included.

Show More Show Less

AAF Eye-Bolt Anchor Plate Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7608880

Part#: 116206

Ships in 1 Business Day

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF offers safety harness Seat Belt Anchors (eye-bolt and anchor plate) to help ease the installation of your safety belt. This eyebolt, and anchor plate(washer/nut) kit is made of premium quality steel to fit your car for safety. When it comes to quality hardware for mounting your seat belts, AAF has the racing harness components you need. Never take a chance when it comes to safety!

Show More Show Less

AAF Skid Plate - E30

Modification Required to fit Non M20 Engines

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593092

Part#: 11629

In Stock

$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 285.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 299.00

This product was last offered at the strikethrough price on
05-03-2026

$ 285.99 USD

Limited Qty Sale

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. E30 race engines can be expensive, so protect your investment! AAF's skid plates have proven their durability on the track. Made from precision cut steel plate, welded in house at AAF, and Powder coated for the most robust surface finish. The AAF E30 Skid Plate is a MUST-HAVE for all PRO3 and E30 Race cars. This skid plate does not use steering rack bolts, so the skid plate can be taken on and off without removing critical bolts or changing wheel alignment like other skid plates. Made specifically for an M20, (with a dimpled relief for the oil drain port, and strong gussets on both sides of the oil pan) but can be used on any E30. Includes a nut plate for ease of installation. Comes with all required hardware. Some drilling required.

Show More Show Less

AAF Race Shifter w/Adjustable Shift Shaft - E30 5-Speed

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 5-speed transmissions

T#:7624623

Part#: 116149

Ships in 3 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

AAF Brake Duct Adapters (Pair) - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593101

Part#: 116112

Ships in 3 Business Days

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's brake duct adapters slide directly over the OEM e30 brake duct inlets. They suggest using a strong 2 part bonding adhesive to attach the duct adapters to the OEM brake duct inlet. This is ideal for maximum airflow, as it does not intrude into the air duct, and will create an air-tight seal around the joint. These are the perfect answer for your brake duct kit.

Show More Show Less

AAF Street Shifter W/Adjustable Shift Shaft - E30 6-Speed

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 6-speed transmissions

T#:7624628

Part#: 116149.1-6

Ships in 3 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's Street Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Street Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Street Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Street Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Street Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

AAF Street Shifter W/Adjustable Shift Shaft - E30 5-Speed

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 5-speed transmissions

T#:7624627

Part#: 116149.1

Ships in 3 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's Street Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Street Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Street Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Street Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Street Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

AAF Race Shifter W/Adjustable Shift Shaft - E30 6-Speed

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 6-speed transmissions

T#:7624624

Part#: 116149-6

Ships in 3 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!

Show More Show Less

AAF Brake Backing Plates - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with OEM 325i sized brakes

T#:7593084

Part#: 11611

Ships in 3 Business Days

$ 175.00 USD

Add to Wish List

Qty

$ 175.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. These Backing Plates by Advanced Auto Fabrication feature a large “Pocket” to allow for more efficient air flow into the brake hat. This allows air to travel through the vents in the rotor. AAF's Backing Plate is the full size of the rotor and is a heat shield for the shocks and ball joints. Heating of your shock oil causes oil thinning, which changes the shock dampening characteristics. Protecting your ball joints from heat will improve longevity and prevent premature wear. The backing plates are powder coated black for extra durability and attractive aesthetics. They replace the OEM dust shields, and will need to be removed before installation.

Show More Show Less

AAF Steel Tie Downs(pair)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7624657

Part#: 116127

Ships in 1 Business Day

$ 18.00 USD

Add to Wish List

Qty

$ 18.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Steel car tie down loops are an easy way to add a strong tie down to you car. These tie down loops bolt right to your rear lower shock bolts or your front control arm rear mounts with just a longer bolt. Comes as a pair.

Show More Show Less

AAF Brake Duct Kit w/Adapter For Factory Inlet - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593085

Part#: 11612

Ships in 3 Business Days

$ 330.00 USD

Add to Wish List

Qty

$ 330.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Extend the life of your calipers pads and rotors with the AAF E30 Brake Cooling Duct Kit. Brake cooling is a must for BMW’s that see track use. AAF's Backing Plates feature a large “Pocket” to allow for more efficient air flow into the brake hat. This allows air to travel through the vents in the rotor. AAF's Backing Plate is the full size of the rotor and is a heat shield for the shocks and ball joints. The lightweight aluminum tubes provide a sturdy enough passage for air to travel to the rotor, while being able to take some abuse if the tire or road debris comes into contact with it. On very tight turns the tire will contact the aluminum tube and not the flex hose making the flex hose last much longer. The AAF adapter inlet attaches directly to the factory brake duct inlet with no other modifications needed(1987 or newer). Kit Includes: Two 3' Aluminum Duct Tubes One length of Flex tube (you cut to length for each side) Two AAF Backing plates (left & right) Eight hose clamps Attaching hardware AAF Adapter for the factory inlet.

Show More Show Less

AAF Oil Pan Baffle - E30 M5x

For Vehicles with M50/M52/S50/S52

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593106

Part#: 116182

Ships in 3 Business Days

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars.

Show More Show Less

AAF ZF Transmission Swap Kit - 5.5" Bearing - BMW E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129730

Part#: E30ZFTSK55

Ships in 3 Business Days

$ 1,198.00 USD

Add to Wish List

Qty

$ 1,198.00 USD

Add to Wish List

Upgrade your E30’s drivetrain with the AAF ZF Transmission Swap Kit, a turnkey solution for those demanding more reliability and smoother gear engagement.

Project Cars

SELECT YOUR BMW

Advanced Auto Fabrication for BMW E30 M3 S14 2.3L

Sub-Categories

AAF HVAC Firewall Block Off Plate - E30

AAF Eye-Bolt Anchor Plate Kit

AAF Skid Plate - E30

AAF Race Shifter w/Adjustable Shift Shaft - E30 5-Speed

AAF Brake Duct Adapters (Pair) - E30

AAF Street Shifter W/Adjustable Shift Shaft - E30 6-Speed

AAF Street Shifter W/Adjustable Shift Shaft - E30 5-Speed

AAF Race Shifter W/Adjustable Shift Shaft - E30 6-Speed

AAF Brake Backing Plates - E30

AAF Steel Tie Downs(pair)

AAF Brake Duct Kit w/Adapter For Factory Inlet - E30

AAF Oil Pan Baffle - E30 M5x

AAF ZF Transmission Swap Kit - 5.5" Bearing - BMW E30

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results