For many E30, E36, E28, and Z3 owners, the factory antenna is often a source of frustration. Many have stopped functioning entirely after forty years post-production. What's more, if your antenna is stuck at full height, it can ruin the clean lines of your vehicle’s rear end. The typical solution is a cheap grommet from the hardware store, which can lead to water/debris intrusion and more headaches down the road. Over the years, we've noticed the increase in demand for this modification, in addition to the issues associated with other, less optimized antenna delete pieces. Hours of research and development have culminated in a perfect-fit antenna delete plug—tailored specifically for your vintage BMW!

Our high-quality solution is engineered for durability, providing a sleek and watertight finish that restores the aesthetic of your car’s rear end while eliminating the need for an obsolete and likely disfunctional factory antenna.

Key Features:

Eliminates Factory Antenna: Solves issues associated with malfunctioning or broken antennas. Watertight Seal: This prevents water and debris from seeping into the trunk area, protecting against rust and corrosion. Enhanced Appearance: Streamlines the look of your BMW’s rear end for a more refined finish. Simple Installation: Installs in seconds without any tools required. Robust Construction: Made from quality low-density polyethylene for long-lasting durability. Precision Engineering:

The Turner Motorsport Antenna Delete was designed and rigorously tested by our in-house team of engineers in Wadsworth, Ohio. Utilizing state-of-the-art technology such as FARO laser scanning for precise reverse engineering, SolidWorks 3D CAD modeling, and extensive product testing, this delete solution offers exact fitment and top-tier quality you can trust.

Is your BMW's emblem faded, chipped, peeling or even MISSING? A new Genuine BMW hood or trunk badge is an easy and inexpensive way to treat your BMW and spruce up its looks. Best of all, it takes only minutes to change! This is the current plastic replacement roundel emblem that BMW sells. An all metal version is also available for vintage BMWs. Grommets sold separately. 

Click here for installation instructions.

Read This - This emblem can fit the hood, or the trunk, or both - depending on your model. BMW used this emblem in both locations on some cars but on some other models they may have used a different emblem in that location. Refer to the list below for specifics on what this emblem fits. If the emblem you need is not listed, see the rest of emblems for sale on our site. If you have futher questions please give us a call - we'd love to help you get the right BMW emblem for your car and avoid confusion and returns later on.

 

+ Emblem Application Specifics

(click here to check your car)

Fits the following BMWs:
Hood Emblem
1970-1976 2002 BMW 1600 2002 2002tii
1 Series
2008+ E82 BMW 128i 135i
3 Series
1977-1983 E21 BMW 320i 323i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive M3
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3
2007+ E93 BMW 328i 328xi 328i xDrive 335i 335xi 335i xDrive M3
5 Series
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
6 Series
1982-1989 E24 BMW 633csi 635csi M6
2004+ E63 BMW 645ci 650i M6
7 Series
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive 760li
X series - SAV
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M
Z Series
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M coupe M Roadster


Trunk Emblem
3 Series
1984-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3 - Not for Convertibles
5 Series
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2011+ F10 BMw 528i 528i xDrive 535i 535i xDrive 550i 550i xDrive M5
7 Series
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive 760li
Z Series
4/1/1999-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster - not for coupes
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster - not for coupes

Known exceptions (this emblem does not fit the following applications):
E12 trunk, E21 trunk, E23 trunk, E24 trunk, E28 trunk, E30 (non-M3) trunk, E36 convertible trunk, E39 trunk, E46 trunk, E90/E91/E92/E93 trunk, E63/E64 trunk, E65 trunk, E82 trunk, E83 X3 trunk, E53 X5 trunk, E70 X5 trunk, E71 X6 trunk, Z1 trunk, Z3 trunk, MZ3 trunk, Z4 Roadster hood, Z4 M Roadster hood

This paint is a perfect match for the BMW Black Sapphire Metallic, paint code 475. Not to be confused with non-metallic black.

Includes:

12ml base coat
12ml clear coat

Eliminate your sunroof leak with a brand new seal from Genuine BMW.

Genuine BMW Circul.Sliding/Lifting Roof Cover Gasket - L=2580Mm
This item fits the following BMW Chassis:
E30 M3,E30

Aero upgrades are undoubtedly one of the most visually striking enhancements you can make to your vehicle. A carbon fiber front lip, in particular, is a popular choice that instantly elevates the car's appearance, making it stand out from the crowd.

However, this bold aesthetic upgrade has its challenges, especially when navigating uneven roads or steep driveways that can potentially damage the expensive carbon fiber. Luckily, Acexxon offers a solution to safeguard your valuable lip from scratches and more serious damage, allowing you to fully enjoy the upgrade without worries.

The Acexxon kit comprises five 18-inch strips that securely attach to the underside of your lip using pre-installed 3M double-sided tape. Three of these strips feature a smooth end, seamlessly blending with the front lip's leading edge. The remaining two strips are designed with contour flex sections, ensuring a precise fit around the lip's curved contours. Compared to other kits, Acexxon's design minimizes trimming requirements, needing only the trimming of excess material at the lip's ends for a flawless finish.

Key Features:

Includes 5 strips Each strip measures 18" in length and 1.75" in width Thickness of 5.47mm Equipped with pre-installed 3M tape for easy installation

BMWs, just like many other makes, only include plastic under-body shields and are often vulnerable on the underside of the engine bay to debris in the road, track, and off road rally courses. When the vehicles are lowered, they also become vulnerable to damage when bottoming out on high spots in the road, drive ways, and other business entrances. This can pose a serious problem if the oil pan and other sensitive components are damaged when this happens. Cracks in the oil pan could result in a destroyed motor if the oil is allowed to completely leak out and any number of bushings, steering components, or exposed fluid lines could easily be ripped out of place, compromising the safety and control  of the vehicle.

To prevent this, Race Skids provides a range of Heavy Duty Skid Plates for many classic BMW models. Constructed from heavy duty 10-gauge steel, these skid plates provide a much needed upgrade to under-body protection, helping to absorb the the impact of debris or the road itself to the bottom of the vehicle. This helps ensure that the oil pan and other components are left completely intact, keeping you on the road with no worries.

An added benefit of these Heavy Duty Skid Plates is a black powder coated surface. This protects the plate itself from oxidation and corrosion, gives the plate a smooth scratch resistant surface, and makes it much easier to clean and maintain, allowing you to simply spray or wipe away built up dirt, salt, or any other build up.

Included with the Skid Plate is all needed mounting hardware. These too are corrosion resistant to allow for easy installation and removal of the skid plate for needed maintenance to the vehicle.

Fits the following Chassis:
E30 BMW 

Fits the following Motor:
M50, M52, S50, S52 engine swap

Want to install it yourself? Check out the Installation PDF

BMW E30 Washer Fluid Container Kit is the perfect solution for replacing your worn or damaged washer fluid tank, ensuring reliable performance and maintaining the pristine condition of your vehicle. This comprehensive kit includes everything needed for a hassle-free installation, such as a brand-new washer fluid tank, cap, pump, and mounting hardware. Designed to meet or exceed OEM standards, this kit guarantees durability and optimal functionality.

• Complete kit includes tank, cap, pump, and mounting hardware for convenience
• Ensures reliable washer fluid performance for clear visibility
• Direct fitment for BMW E30 models with no modifications required
• Durable construction meets or exceeds OEM standards
• Easy installation to restore functionality quickly

Upgrade your BMW E30's washer fluid system with this premium replacement kit and enjoy clear, streak-free visibility.

Elevate Your Porsche's Performance with Rennline's Stainless Steel Race Hooks

Rennline introduces stainless steel folding race hooks that deliver a seamless installation on Porsche models equipped with factory screw-type removable tow hooks. In stark contrast to aluminum alternatives often advertised as mere decorations, Rennline's stainless steel tow hooks are meticulously precision-machined to meet the punishing demands of racing environments. Boasting a 2" opening, compliant with the requirements of most organized race events, these hooks conveniently thread into the factory bumper pull location. To safeguard your bumper cover, each hook is equipped with a rubber bumper to prevent unsightly damage. By adding these highly visible and efficient hooks, you'll ensure the satisfaction of corner workers and track officials. What sets Rennline's race hooks apart:

• Original folding tow hooks with a remarkable track record over countless years.
• Precision machined tapered design featuring chamfered edges to eliminate the need for cutting tow straps.
• Immaculate brushed surface finish.
• Constructed from 300 series stainless steel tow loop.
• Machined "TOW" graphics for added style.
• Compatible with GoPro camera mounts (Mount sold separately).
• Designed for use with 5/8-11 right-hand thread pitch.