BMW Heating & Air Conditioning for BMW 3 Series E30 (1984-1991)

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

For M3 Models From 09/87+ Only

For Vehicles Produced From 09/87+ Only

T#:32350825

Part#: E30M3LATE

Back Ordered

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Early Model

For M3 Models Up To 09/87 Only

For Vehicles Produced Up To 09/87 Only

T#:32317688

Part#: E30M3EARLY

Ships in 4 Business Days

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

For Vehicles Produced From 09/87+ Only

T#:32350866

Part#: E3024VLATE

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

For Vehicles Produced Up To 09/87 Only

T#:32350849

Part#: E3024VEARLY

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Mid Model

For 325e/i Models From 09/87 Up To 08/89 Only

For Vehicles Produced From 09/87 Up To 08/89 Only

T#:32317675

Part#: E30325MID

Ships in 3 Business Days

Starting at $ 1,756.00 USD

Add to Wish List

Starting at $ 1,756.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

For 325e/i Models From 09/89+

For Vehicles Produced From 09/89+

T#:29666101

Part#: 30-325-LATE-AC

Ships in 3 Business Days

Starting at $ 1,709.99 USD

Add to Wish List

Starting at $ 1,709.99 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which model/year should I choose? Use the mfg. date on the driver's door of your E30 as well as our supplemental user guide to select the appropriate combination for your car. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Early Model

For 325e/i Models Up To 09/87 Only

For Vehicles Produced Up To 09/87 Only

T#:29666099

Part#: 30-325-EARLY-AC

Ships in 6 Business Days

Starting at $ 1,709.35 USD

Add to Wish List

Starting at $ 1,709.35 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

Genuine BMW Evaporator R12/R134A - 64518391780 - E30,E30 M3

T#:22063

Part#: 64518391780

Ships in 8 Business Days

6% off MSRP $ 778.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 731.99 USD

Add to Wish List

Qty

6% off MSRP

$ 778.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 731.99 USD

Add to Wish List

Genuine BMW Evaporator - R12/R134A
This item fits the following BMW Chassis:
E30 M3,E30

Blower Unit - E30

T#:4557

Part#: 64541381633

Ships in 5 Business Days

3% off MSRP $ 694.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 676.99 USD

Add to Wish List

Qty

3% off MSRP

$ 694.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 676.99 USD

Add to Wish List

This electric auxiliary fan for BMW E30 M3 1988-1991 mounts in front of the radiator and is designed to push air through the A/C Condenser and main radiator. It provides additional cooling for when the car is in traffic. It is a common failure item. If your engine temps are creeping up or if your A/C isn't blowing cold this could be the cause.

This item fits the following BMWs:
1988-1991 E30 BMW M3

Show More Show Less

Heater - A/c Blower Motor - E30

T#:16264

Part#: 64111373766

Special Order: No Guaranteed ETA

2% off MSRP $ 682.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Qty

2% off MSRP

$ 682.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 665.99 USD

Add to Wish List

Replace your defective E30 heater / air conditioning blower motor with this Genuine BMW replacement. If you are experiencing reduced or no blower fan output it may be time to replace this blower motor. This integrated unit includes both the motor and the fan blades. It is mounted under the windshield cowl at the base of the windshield.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3 - ONLY for cars with plastic inlet heater core

Show More Show Less

A/C Solutions E30 24v Swap Lines And Manifold Kit (S50, S52, S54, And...

For E30 models with a 24v Engine Swap Only (S50, S52, S54, M50, M52, and M54)

T#:32284525

Part#: ACS3024VABMFKIT1

Ships in 3 Business Days

$ 663.00 USD

Add to Wish List

Qty

$ 663.00 USD

Add to Wish List

Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E30 using the E36 M3 Denso compressor. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. This setup is designed to work with the S50, S52, S54, M50, M52, and M54 engines, offering seamless integration and reliable performance. Which model (chassis) should I choose? Select the model (chassis) assigned to your E30 when it left the factory to ensure the proper line routing. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Denso manifold o-ring Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso compressor (Denso 471-1114 or 471-1115). BMW compressor bracket (64551730768) will be required to support the Denso compressor. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all)

Show More Show Less

ACM BMW Blower - E30 3 Series

T#:149593

Part#: 64111466015

Back Ordered

$ 598.98 USD

Add to Wish List

Qty

$ 598.98 USD

Add to Wish List

This blower motor helps to supply the cabin of your BMW with either hot air from the heater core or cool air from the air conditioning system. Failing blower motors may not work at all or blow very little even under the highest settings. Another sign of a failing blower is a high pitched chirping sound, often heard at lower fan speeds. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Genuine BMW Magnetic Clutch - 64521386601 - E30,E34,E30 M3,E34 M5 ...

For Vehicles with Seiko A/C Compressor

T#:152019

Part#: 64521386601

Ships in 7 Business Days

2% off MSRP $ 573.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 561.99 USD

Add to Wish List

Qty

2% off MSRP

$ 573.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 561.99 USD

Add to Wish List

Magnetic clutch for the A/C compressor Genuine BMW Magnetic Clutch This item fits the following BMW Chassis: E30 M3,E34 M5,E30,E34

Supporting Bracket - E30

T#:151967

Part#: 64521268536

Ships in 7 Business Days

2% off MSRP $ 547.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 535.99 USD

Add to Wish List

Qty

2% off MSRP

$ 547.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 535.99 USD

Add to Wish List

Genuine BMW Supporting Bracket
This item fits the following BMW Chassis:
E30 M3,E30

Heater Valve - for Plastic Inlet Heater Core - E30

For vehicles with plastic heater core inlet

T#:16265

Part#: 64111386706

Ships in 3 Business Days

3% off MSRP $ 473.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 461.99 USD

Add to Wish List

Qty

3% off MSRP

$ 473.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 461.99 USD

Add to Wish List

Not getting heat to the cabin of the car or not able to turn off the heat? The heater control valve may be the culprit. On the E30 3 series BMW produced 2 different types of heater core / heater valve. One type had aluminum inlet pipes (64118391363) and the other had plastic inlets (64118391362). It is a good idea to inspect the heater core while replacing the heater valve.You will have to check your car to ensure that you are ordering the correct part. Please check the photo of this item.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3

Show More Show Less

Heater Valve - for Aluminum Inlet Heater Core - E30

T#:20287

Part#: 64111386707

Ships in 3 Business Days

3% off MSRP $ 473.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 461.99 USD

Add to Wish List

Qty

3% off MSRP

$ 473.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 461.99 USD

Add to Wish List

Not getting heat to the cabin of the car or not able to turn off the heat? The heater control valve may be the culprit. On the E30 3 series BMW produced 2 different types of heater core / heater valve. One type had aluminum inlet pipes (64118391363) and the other had plastic inlets (64118391362). It is a good idea to inspect the heater core while replacing the heater valve. You will have to check your car to ensure that you are ordering the correct part. Please check the photo of this item.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3

Show More Show Less

Heater Core - Plastic Inlets - E30

T#:150348

Part#: 64118391362

Ships in 2 Business Days

2% off MSRP $ 431.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 422.99 USD

Add to Wish List

Qty

2% off MSRP

$ 431.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 422.99 USD

Add to Wish List

This is the heater core for BMW E30 3 series with plastic inlets. Please note there 2 different heater cores that might be on your E30. You will have to check your car to ensure that you are ordering the correct part. Please check the photo of this item.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3

Show More Show Less

Genuine BMW A/C Compressor Bracket - E30 318i M10 1.8L

T#:169430

Part#: 82399404494

Ships in 6 Business Days

$ 402.99 USD

Add to Wish List

Qty

$ 402.99 USD

Add to Wish List

Genuine BMW Climate Compressor Supporting Bracket
This item fits the following BMW Chassis:
E30 M3,E30

A/C Solutions BMW E30 Sanden Conversion Line Set

For use with a Sanden 508 (SD5H14) Compressor and A/C Solutions Sanden Compressor Brack...

T#:32284522

Part#: ACS-30-1014-AB-S

Ships in 3 Business Days

$ 385.99 USD

Add to Wish List

Qty

$ 385.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

CSF E30 Parallel Flow Condenser + 13" SPAL Fan Combo

T#:29500098

Part#: ACS-30-CSF-SPAL-

Ships in 7 Business Days

$ 378.99 USD

Add to Wish List

Qty

$ 378.99 USD

Add to Wish List

Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser and SPAL fan upgrade will replace your factory condenser and auxiliary fan resulting in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. Note: In order to properly run any SPAL fan, additional wiring will be required What’s included? CSF parallel flow condenser (cross ref # 64538391509) Genuine SPAL 13" straight blade pusher fan 30A fuse Mounting hardware Detailed installation instructions Fitment notes: Additional wiring will be required For use with the following models: BMW E30 (all)

Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set

For use with a Sanden 508 (SD5H14) Compressor and A/C Solutions Sanden Compressor Brack...

T#:29466768

Part#: ACS-30-AB-SET

Ships in 3 Business Days

$ 375.99 USD

Add to Wish List

Qty

$ 375.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

Genuine BMW Heater Core - E30

T#:368707

Part#: 64118391363

Ships in 6 Business Days

2% off MSRP $ 377.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 369.99 USD

Add to Wish List

Qty

2% off MSRP

$ 377.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 369.99 USD

Add to Wish List

Genuine BMW Blower Housing - E30

T#:149321

Part#: 64111372507

Ships in 8 Business Days

2% off MSRP $ 362.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 353.99 USD

Add to Wish List

Qty

2% off MSRP

$ 362.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 353.99 USD

Add to Wish List

Genuine BMW Blower Housing
This item fits the following BMW Chassis:
E30 M3,E30

A/C Solutions BMW S14 M10 Sanden Compressor Bracket

T#:32118912

Part#: ACS-1014-KIT

Ships in 3 Business Days

$ 325.99 USD

Add to Wish List

Qty

$ 325.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using a fully isolated (bushed) design similar to that of the factory E30 M3 assembly. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and zinc-plated to withstand the toughest conditions without sacrificing the OEM look and feel. Overall package weight (including compressor) comes in at 17lbs (less than the original E30 M3 assembly) and boasts a tighter center of gravity for less stress on the isolator bushings. What’s included? A/C Solutions S14/M10 Sanden compressor bracket Yellow zinc 8.8 and 10.9 hardware Compressor ground wire Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. A larger V-belt will be required (Gates 13x875mm). For use with the following models: BMW E30 (318i, 320is, M3) PATENT PENDING Cross-reference part numbers: 64521268536, 64521277002, 64521706826, 07119932095, 07119904115, 07119901161, 07119905549, 07119932112, 07119932122, 07119904463, 07119900581, 07119902912, 07119913664, 64521268537, 64521268538, 32411705063, 07119900052, 07119907030, 07129946400, 07129905767, 64521278034, 07119912712, 07129964672, 64521278036, 64521276354, 07119901120, 07119903039

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (standard)

For Use With ACS-203038-KIT OR ACS-1014-KIT Only, Or Custom Application

T#:29466797

Part#: SD5H14-6668

Ships in 8 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.

Show More Show Less

Genuine BMW A/C Hose - E30

For vehicles with R134A systems

T#:14139

Part#: 64538391051

Ships in 6 Business Days

3% off MSRP $ 331.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 321.00 USD

Add to Wish List

Qty

3% off MSRP

$ 331.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 321.00 USD

Add to Wish List

Genuine BMW Suction Pipe Evaporator-Compressor - R134A
This item fits the following BMW Chassis:
E30 M3,E30

Genuine BMW A/C Hose

T#:152456

Part#: 64538391048

Ships in 4 Business Days

3% off MSRP $ 331.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 321.00 USD

Add to Wish List

Qty

3% off MSRP

$ 331.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 321.00 USD

Add to Wish List

Genuine BMW Suction Pipe Evaporator-Compressor - R12/R134A
This item fits the following BMW Chassis:
E30 M3,E30

Uro Heater Control Valve - E30

2X Entries Into Our F80 M3 Sweepstakes

T#:6795786

Part#: 64111386707

Ships in 1 Business Day

$ 297.99 USD

Add to Wish List

Qty

$ 297.99 USD

Add to Wish List

Not getting heat to the cabin of the car or not able to turn off the heat? The heater control valve may be the culprit. On the E30 3 series BMW produced 2 different types of heater core / heater valve. One type had aluminum inlet pipes (64118391363) and the other had plastic inlets (64118391362). It is a good idea to inspect the heater core while replacing the heater valve. You will have to check your car to ensure that you are ordering the correct part. Please check the photo of this item. This item fits the following BMWs: 1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (Rear Exit)

For Use With ACS-203038-KIT OR ACS-1014-KIT Only, Or Custom Application

T#:29466793

Part#: SD5H14-6630

Ships in 3 Business Days

$ 285.99 USD

Add to Wish List

Qty

$ 285.99 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345)

Show More Show Less

CSF E30 Parallel Flow Condenser

T#:29500095

Part#: ACS-30-CSF-KIT

Ships in 3 Business Days

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser is used to replace your factory tube and fin condenser and is built to work with a SPAL 13" pusher fan (sold separately). This upgrade will result in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. What’s included? CSF parallel flow condenser (cross ref # 64538391509) Mounting hardware

Show More Show Less

A/C Solutions BMW E30 LHD Interior Lines

T#:29300814

Part#: ACS-30-INT-SET

Ships in 7 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. Note: These are only compatible with LHD E30s What’s included? Low-pressure interior suction line (cross ref # 64538391048) High-pressure interior discharge line (cross ref # 64538391047) 3x #10 R134a o-ring(s) 1x #8 R134a o-ring(s) 2x #6 R134a o-ring(s) Cork tape for the low-pressure suction line

Show More Show Less

Genuine BMW Dashboard Fresh Air Vent - Center - E30

T#:150924

Part#: 64221381147

Ships in 5 Business Days

3% off MSRP $ 244.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Qty

3% off MSRP

$ 244.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 237.99 USD

Add to Wish List

Genuine BMW Fresh Air Grille Center
This item fits the following BMW Chassis:
E30 M3,E30

A/C Solutions E30 24v Swap Denso Compressor Manifold

T#:32284524

Part#: ACS-24V

Ships in 3 Business Days

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Designed for the E36 M3 Denso Compressor, our 24v manifold allows you to run our E30 24v Swap Line Set and retain A/C in your S5x or M5x powered E30. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso Compressor (Denso 471-1114 or 471-1115) and the A/C Solutions E30 24v Swap Lines. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all) PATENT PENDING

Show More Show Less

A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E2...

Models Produced Before 1985 Will Require Bracket 64521717007

T#:29466786

Part#: ACS-203038-KIT

Ships in 8 Business Days

$ 225.99 USD

Add to Wish List

Qty

$ 225.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING

Show More Show Less

ACM Blower Motor - E30, Z3

T#:555935

Part#: 64111370930ECS

Ships in 1 Business Day

$ 225.00 USD

Add to Wish List

Qty

$ 225.00 USD

Add to Wish List

If you are dealing with crickets in the dash, it is time to change out your blower motor! Over time the bearings can become faulty and being to cause squeaking at lower fan speeds and eventually at all speeds. Additionally, the fan motor can also fail, preventing any air from flowing through the vents.

Show More Show Less

Genuine BMW Air Conditioning Hose

For vehicles with production date between 09/1987 to 03/1992

T#:14136

Part#: 64531381740

Ships in 3 Business Days

3% off MSRP $ 206.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

Qty

3% off MSRP

$ 206.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

Genuine BMW Pipe-Dryer Pressure Hose - R12
This item fits the following BMW Chassis:
E30 M3,E30

OEM Rein A/C Evaporator Assembly - E30 BMW

2X Entries Into Our F80 M3 Sweepstakes

T#:379660

Part#: 64518391780

Back Ordered

$ 289.99

This product was last offered at the strikethrough price on
06-29-2026

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Have a leak in your a/c system but can't find it? The evaporator allows the refrigerant within the a/c system to lose pressure and cool down, allowing it to transfer that chill to the air coming out of the dash vents. If leaking, the a/c system will lose refrigerant and not function how it should.

Show More Show Less

Nissens Air Conditioning Condenser - E30

T#:372362

Part#: 64538391509

In Stock at Vendor

$ 202.82

This product was last offered at the strikethrough price on
07-15-2026

$ 188.16 USD

Add to Wish List

Qty

$ 188.16 USD

Add to Wish List

Keep your air conditioning functioning perfectly.

Genuine BMW Evaporator Temperature Sensor - E24 E28 E30 Z3 E52 ...

T#:183848

Part#: 64511386920

Ships in 3 Business Days

3% off MSRP $ 192.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 187.99 USD

Add to Wish List

Qty

3% off MSRP

$ 192.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 187.99 USD

Add to Wish List

Original BMW Evaporator Temperature Senso

Genuine BMW Evaporator Temperature Regulator - 64508390158 - E30 ...

T#:151775

Part#: 64508390158

Back Ordered

3% off MSRP $ 169.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.99 USD

Add to Wish List

Qty

3% off MSRP

$ 169.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.99 USD

Add to Wish List

Genuine BMW Evaporator Temperature Regulator
This item fits the following BMW Chassis:
E30 M3,E30

Genuine BMW A/C Hose - E30 318i 318is 325ix 325i 325is 325e

For vehicles with production date from 09/1985

T#:18859

Part#: 64538391052

In Stock

Sale - Save 8% $ 176.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 163.01 USD

Add to Wish List

Qty

Sale - Save 8%

$ 176.99

This product was last offered at the strikethrough price on
08-26-2026

$ 163.01 USD

Add to Wish List

PRESSURE HOSE ASSY COMPRESSO 64538391052

A/C Hose Assembly
Fits BMWs: 91-87 BMW 325I; 91-88 325IX

Genuine BMW A/C Hose - E30 318i 318is M42 325i 325is 325ix

T#:20463

Part#: 64538391041

In Stock

3% off MSRP $ 163.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

Qty

3% off MSRP

$ 163.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 158.99 USD

Add to Wish List

CONDENSER-DRYER PRESSURE HOS 64538391041

Hella Part Number - 351209101 A/C Hose Assembly
Fits BMWs: 88-87 BMW 325; 91-87 325I; 91-87 325IS; 91-88 325IX

BMW 320 /323 (86-) HEATER

T#:583884

Part#: 64118391362

Ships in 6 Business Days

$ 158.99 USD

Add to Wish List

Qty

$ 158.99 USD

Add to Wish List

A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Early M...

For vehicles with a production date up to 09/1987

T#:32118922

Part#: A301014CEARLYSET

Ships in 3 Business Days

$ 154.00 USD

Add to Wish List

Qty

$ 154.00 USD

Add to Wish List

Designed specifically for the early model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (< 09/87): BMW E30 (320is, M3) Cross reference part numbers: 64539067578, 64531386565

Show More Show Less

A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Late Mo...

For vehicles with a production date from 09/1987+

T#:32118921

Part#: AC301014CLATESET

Ships in 3 Business Days

$ 154.00 USD

Add to Wish List

Qty

$ 154.00 USD

Add to Wish List

Designed specifically for the late model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (320is, M3) Cross-reference part numbers: 64539067578, 64531386565

Show More Show Less

Air Conditioner Switch - E30 1984-1996

T#:10538

Part#: 61311372051

Ships in 3 Business Days

3% off MSRP $ 157.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 153.99 USD

Add to Wish List

Qty

3% off MSRP

$ 157.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 153.99 USD

Add to Wish List

This is the two button A/C switch for E30 chassis 3 series. One button is for Air Conditioning and the other is for recirculation.

This item fits the following BMWs:
1984-1987 E30 BMW 318i 325e 325es 325i 325ic 325is

Show More Show Less

Genuine BMW Air Conditioning Hose - Compressor To Condenser - E30 318...

T#:20459

Part#: 64539067569

Ships in 7 Business Days

3% off MSRP $ 156.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 151.99 USD

Add to Wish List

Qty

3% off MSRP

$ 156.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 151.99 USD

Add to Wish List

PRESSURE HOSE ASSY COMPRESSO 64539067569

Part Number - 351209071 A/C Hose Assembly
Fits BMWs: 91-85 BMW 318I; 91 318IC; 91-87 325I; 91-88 325IX

Genuine BMW Air Conditioning Hose - Drier Pressure - E30 318i 325i ...

For convertible models only

T#:152453

Part#: 64538391040

Ships in 3 Business Days

3% off MSRP $ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 147.99 USD

Add to Wish List

Qty

3% off MSRP

$ 152.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 147.99 USD

Add to Wish List

Genuine BMW Pipe-Dryer Pressure Hose - R134A
This item fits the following BMW Chassis:
E30

Genuine BMW Air Conditioning Pressure Switch

T#:368756

Part#: 64538390971

Ships in 3 Business Days

2% off MSRP $ 147.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 143.99 USD

Add to Wish List

Qty

2% off MSRP

$ 147.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 143.99 USD

Add to Wish List

Air Conditioner Switch - E30 1987-1991

T#:10563

Part#: 61311380557

Ships in 2 Business Days

3% off MSRP $ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 141.99 USD

Add to Wish List

Qty

3% off MSRP

$ 145.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 141.99 USD

Add to Wish List

This is the two button A/C switch for E30 chassis 3 series. One button is for Air Conditioning and the other is for recirculation.

This item fits the following BMWs:
1987-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Heating & Air Conditioning for BMW 3 Series E30 (1984-1991)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results