BMW Drivetrain Parts for BMW 3 Series E30 (1984-1991)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Revshift - Corporate Logo
T#:600155
Part#: PTM-BT
In Stock
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
95A Track (Green): Significantly stiffer and stronger than OEM rubber. Noticeable increase in NVH. Excellent for enthusiastically driven street and track cars.
Packaged by Turner - Corporate Logo
T#:30197962
Part#: G260MTHWKTTKT
Ships in 4 Business Days
$ 97.99 USD
Free Shipping on orders $49 and up

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555722
Part#: PBTSRKT25
In Stock
Sale - Save 23% $ 237.99

This product was last offered at the strikethrough price on
05-03-2026

$ 182.51 USD
Free Shipping
Sale - Save 23%
$ 237.99

This product was last offered at the strikethrough price on
05-03-2026

$ 182.51 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:338069
Part#: 31211468753
In Stock at Vendor
Starting at $ 144.97 USD
Free Shipping
Starting at $ 144.97 USD
Free Shipping

E30 M3 Front Hub Assembly w/bearing. This bearing requires that you use your existing ABS ring. This is a simple press fit. This is an OEM Wheel Bearing Hub Assemblies made by FAG. GSP and FAG are the leaders in wheel bearing technology. These wheel hubs are the best you can buy. Alternate part number 31212225362.

FAG is an OE supplier to BMW as well as several other German marques. 

GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.


This hub uses the ABS ring from the E28 5-series. For the E30 M3 the original ABS ring will need to be removed and installed on the new hub.

Show More Show Less

Revshift - Corporate Logo
T#:47885235
Part#: PTM-BT-80A
Back Ordered
$ 59.99 USD
Free Shipping on orders $49 and up
80A Street (Black) Bushings: Stiffer and stronger than OEM rubber. Minimal increase in NVH. Great choice as an upgrade over stock mounts (OEM+).
Packaged by Turner - Corporate Logo
T#:555723
Part#: PBTSRKT26
In Stock
Sale - Save 13% $ 332.28

This product was last offered at the strikethrough price on
05-03-2026

$ 288.17 USD
Free Shipping
Sale - Save 13%
$ 332.28

This product was last offered at the strikethrough price on
05-03-2026

$ 288.17 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:554397
Part#: E24635CSIATKT
Ships in 5 Business Days
$ 154.17 USD
Free Shipping
$ 154.17 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. Included in this kit are high quality Red Line D4 ATF fluid and OEM filters, seals, and plugs.

Fits the following BMWs:
1978-1987 E23 BMW 733i 735i
1977-1989 E24 BMW 633CSi 635CSi
1982-1988 E28 BMW 528e 533i 535i/is
1984-1991 E30 BMW 318i/is 325i/is/ix 325e/es

Show More Show Less
JB Racing - Corporate Logo
T#:3769
Part#: 520-040-215
Back Ordered
11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
11% off MSRP
$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555694
Part#: PBTSRKT5
Ships in 4 Business Days
Sale - Save 18% $ 265.99

This product was last offered at the strikethrough price on
05-03-2026

$ 217.73 USD
Free Shipping
Sale - Save 18%
$ 265.99

This product was last offered at the strikethrough price on
05-03-2026

$ 217.73 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Show More Show Less

SACHS Performance - Corporate Logo
T#:393810
Part#: 053151231031
In Stock
$ 113.99 USD
Free Shipping
$ 113.99 USD
Free Shipping

Improved bearing from Sachs Performance that is designed for a performance oriented clutch system. Resists wear and damage from increased spring pressure and higher engagement RPM's.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Performance equivalent of BMW part #'s:

  • 1 207 275
  • 1 208 423
  • 1 223 168
  • 1 223 366
  • 1 225 203
Show More Show Less
Packaged by Turner - Corporate Logo
T#:30960425
Part#: TMSE30M3TSKT
In Stock
$ 109.99 USD
Free Shipping on orders $49 and up
The oil in your manual transmission is extremely vital to the life of your transmission. Over time it will begin to break down, lose viscosity, and begin to allow excess heat and friction. This kit is the perfect remedy to this problem. Included are 2 quarts of Redline MTL 75w-80 transmission fluid, which features a fully synthetic base for better protection and wear resistance, and Genuine BMW fill and drain plugs.
Show More Show Less
JB Racing - Corporate Logo
T#:3768
Part#: 520-050-228
Ships in 4 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3
Show More Show Less


JB Racing - Corporate Logo
T#:385699
Part#: 520-060-228
Ships on Aug 5, 2026
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991  E30 BMW  325i 325ic 325is (with single-mass flywheel)
1989-1990  E34 BMW  525i (with single-mass flywheel)
Show More Show Less
JB Racing - Corporate Logo
T#:3647
Part#: 520-110-215
Ships in 2 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i
Show More Show Less
Packaged by Turner - Corporate Logo
T#:42133544
Part#: 835225790TKT
In Stock
$ 59.72 USD
Free Shipping on orders $49 and up
The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5

Revshift - Corporate Logo
T#:1105936
Part#: SMM-E30
Ships on Aug 11, 2026
$ 44.99 USD
Free Shipping on orders $49 and up
Solid bolt through 70D polyurethane motor mounts. Recommended for race use only. These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to their original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Revshift - Corporate Logo
T#:1105908
Part#: PDB-E3095A
Ships in 10 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105935
Part#: PMM-E30-95A
Ships in 6 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevent the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:13430833
Part#: E30SHIFTREBUILKT
Ships in 4 Business Days
$ 211.99 USD
Free Shipping on orders $49 and up
Everything you need to refresh your shifter! Our team of dedicated BMW experts is at your service! We took the guess work out of rebuilding the shifter for your E30.
Performance Throw-out Bearing
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:583039
Part#: 53151600791
Ships in 4 Business Days
$ 104.00 USD
Free Shipping
$ 104.00 USD
Free Shipping

SACHS Performance - Corporate Logo
T#:393842
Part#: 881864999739
In Stock
$ 465.99

This product was last offered at the strikethrough price on
05-03-2026

$ 403.99 USD
Limited Qty Sale
Free Shipping
$ 465.99

This product was last offered at the strikethrough price on
05-03-2026

$ 403.99 USD
Limited Qty Sale
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

Revshift - Corporate Logo
T#:1105928
Part#: DSS-12
Ships in 7 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
These studs and spacers mount the differential 12mm from the subframe. They are intended to be used with our 12mm offset subframe bushings. When raising the subframe, the spacers allow the differential to mount in the stock location which maintains proper pinion angle. The studs keep the spacers in place making for a quick and easy installation. The spacers are made from 6061 aluminum. The class 12.9 studs have hex key reliefs. We recommend using loctite during installation. Flange nuts are included. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:1105938
Part#: STM-BT
Ships in 7 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Solid bolt through 70D polyurethane trans mounts. Recommended for race use only. These trans mounts fit almost all BMW cars excluding the E30 M3 and a few older models. They commonly fit the E30, E36, E46, E9x, E8x, E21, E34, E39. Common BMW part numbers that these trans mounts replace are: 22316799331 23711175939 23711175424 23701141614 Revshift polyurethane transmission mounts are made in the U.S.A. from high-grade polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to its original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
JB Racing - Corporate Logo
T#:3763
Part#: 520-070-228
Ships in 5 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325e up to 5/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 24.0lbs
JB Flywheel Weight = 8.5lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with single mass flywheel)
Show More Show Less


Valeo Single Mass Flywheel Conversion Kit - E28, E30, E34, E36 ...
Not for vehicles with crank position sensor
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:377153
Part#: 52281208
Ships in 1 Business Day
$ 807.22 USD
Free Shipping
$ 807.22 USD
Free Shipping
Upgrade from your failure prone dual mass flywheel with this kit. Includes single mass flywheel, clutch kit and hardware.
JB Racing - Corporate Logo
T#:3749
Part#: 520-120-228
Ships in 1-2 days
$ 854.00 USD
Free Shipping
$ 854.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

This flywheel replaces the stock original dual-mass flywheel and should only be used with the corresponding 'dual-mass' clutch kit. According to BMW the dual mass flywheel was installed in all 325/325e from 5/86 on but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 27.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es (with dual mass flywheel)
Show More Show Less
Revshift - Corporate Logo
T#:1105937
Part#: SMK-E30
Ships in 3 Business Days
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Solid bolt through 70D polyurethane motor and trans mounts. Recommended for race use only. These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to their original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15777312
Part#: 520-040-215-KT
Back Ordered
$ 1,003.99

This product was last offered at the strikethrough price on
05-07-2026

$ 994.99 USD
Free Shipping on orders $49 and up
$ 994.99 USD
Free Shipping on orders $49 and up
A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response. This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come. Stock Flywheel Weight: 27 lbs. JB Racing Lightweight Aluminum Flywheel: 9 lbs.
Show More Show Less

Valeo Clutch Kit - E28, E30, E34, E36
For vehicles with production date from 05/1986
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:379443
Part#: 21211223546
Ships in 5 Business Days
$ 362.99 USD
Free Shipping
$ 362.99 USD
Free Shipping
Replace your worn or slipping clutch to restore drivability. Comprehensive kit includes pressure plate, clutch disc, throw out bearing, pilot bearing, and clutch alignment tool.
Revshift - Corporate Logo
T#:1120841
Part#: PTM-E30M395A
Special Order: No Guaranteed ETA
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
These mounts are the most durable and reliable mounts on the market. CNC machined 6061-T6 billet aluminum flanged ends are molded deep into the polyurethane which prevent the isolated ends from separating under extreme loads. The class 14.9 threaded studs are removable with a hex wrench for ease of installation.
Show More Show Less

ACT - Corporate Logo
T#:14221793
Part#: BM17-HDR6
Ships in 2 Business Days
Sale - Save 10% $ 820.00

This product was last offered at the strikethrough price on
07-20-2026

$ 738.00 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 820.00

This product was last offered at the strikethrough price on
07-20-2026

$ 738.00 USD
Free Shipping on orders $49 and up
BM13-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 6-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 6-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555709
Part#: PBTSRKT14
Ships in 4 Business Days
Sale - Save 3% $ 209.99

This product was last offered at the strikethrough price on
06-15-2026

$ 203.76 USD
Free Shipping
Sale - Save 3%
$ 209.99

This product was last offered at the strikethrough price on
06-15-2026

$ 203.76 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less

Performance Tool - Corporate Logo
T#:5122269
Part#: W83011
Ships in 1 Business Day
$ 23.31 USD
Free Shipping on orders $49 and up
Helpful tool for proper axle boot installations.

Performance Tool - Corporate Logo
T#:1809145
Part#: W80510
Ships in 1 Business Day
$ 34.69 USD
Free Shipping on orders $49 and up
For turning and holding flexplates and flywheels.
Revshift - Corporate Logo
T#:1105934
Part#: PMM-24V-95A
Ships in 7 Business Days
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
These mounts are designed for a 1983-1991 E30 BMW 3-series with a 24 valve M50/M52/S50/S52/S54 engine swap with an E21, 2002tii, or VW MK2 Golf brake booster. They use the OEM motor mount bolt holes on the E30 subframe. The mounts are angled with offset bolts to position the engine so that proper drivetrain alignment is maintained. They are used with E36 engine brackets. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Revshift - Corporate Logo
T#:582010
Part#: PMME30GREEN
Ships in 7 Business Days
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
These mounts are designed for a BMW E30 M3. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:555699
Part#: PBTSRKT8
Ships in 4 Business Days
Sale - Save 2% $ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 291.20 USD
Free Shipping
Sale - Save 2%
$ 296.99

This product was last offered at the strikethrough price on
05-03-2026

$ 291.20 USD
Free Shipping

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:556123
Part#: 11811137076KT
Ships in 4 Business Days
$ 395.00

This product was last offered at the strikethrough price on
05-03-2026

$ 394.17 USD
Free Shipping
$ 394.17 USD
Free Shipping

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These Genuine BMW mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

  • Genuine BMW Engine Mount (x2)
  • OEM Lemforder Manual Transmission Mount (x2)
Show More Show Less
SACHS Performance - Corporate Logo
T#:393868
Part#: 883082999618KT1
Ships in 5 Business Days
$ 1,000.99 USD
Free Shipping
$ 1,000.99 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

  • Performance Throwout Bearing - Designed for increased spring pressure and higher RPM function

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

SACHS Performance - Corporate Logo
T#:393866
Part#: 883082999618KT
Ships in 5 Business Days
$ 1,016.00 USD
Free Shipping
$ 1,016.00 USD
Free Shipping

Ensure your clutch system can get the all of the power to the wheels. Stock clutch components lack the ability to transmit the full torque and horsepower loads to the wheels without suffering from increased wear and eventual clutch fade. Sachs Performance Clutch Kits are designed for sport and race applications, delivering higher torque transmission without succumbing to wear and tear and fading over extended periods of abuse.

Sachs Performance Clutch Kits include the following upgraded components:

  • Performance Pressure Plate - Increased clamping force and resistant to wear

  • Performance Clutch Disc - Allows for higher clamping force, higher torque transmission, and better clutch engagement at higher RPM’s

  • Performance Throwout Bearing - Designed for increased spring pressure and higher RPM function

These kits are available with two different clutch discs, Organic and Metallic. Organic clutch discs are perfect for both performance street and light-moderate track applications. Metallic are designed for specifically for full-time track use such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing. Please be sure you are purchasing the kit that best fits your needs. Our sales staff can help with any questions or concerns you may have!

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

Sachs Performance Organic Clutch Disc - E10 E30 E28 E34
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:393821
Part#: 181862168232
Ships in 5 Business Days
$ 481.00 USD
Free Shipping
$ 481.00 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for both performance street and light to moderate track applications such as occasional endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Rated for 258 ft/lb torque.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
Sachs Performance Pressure Plate - E10 E30 E28 E34
2X Entries For Our G87 M2 Sweepstakes!
SACHS Performance - Corporate Logo
T#:1434
Part#: 883082999618
Ships in 5 Business Days
$ 431.00 USD
Free Shipping
$ 431.00 USD
Free Shipping

Experience longer life and less slippage with this Sachs Performance pressure plate for use with sport/racing clutch discs. This pressure plate offers more clamping power, and is recommended for cars making significantly more hp than stock (forced injection, etc) while using a stock flywheel. This is NOT for use on cars with an aftermarket flywheel (stock flywheel only).

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less

SACHS Performance - Corporate Logo
T#:393843
Part#: 881864999758
Special Order: No Guaranteed ETA
$ 448.99 USD
Free Shipping
$ 448.99 USD
Free Shipping

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:5649930
Part#: E30325USRKT
In Stock
Sale - Save 13% $ 502.91

This product was last offered at the strikethrough price on
05-03-2026

$ 437.89 USD
Free Shipping
Sale - Save 13%
$ 502.91

This product was last offered at the strikethrough price on
05-03-2026

$ 437.89 USD
Free Shipping
Stock rubber bushings and plastic inserts wear down quickly with age, leading to a shifter that is loose, soft, and sloppy. A sloppy shifter greatly detracts from your driving pleasure. If you want to bring back that factory crisp shifter, this kit will do that for you and then some! Not only will it totally overhaul your shifter, but also make it perform better than stock thanks to the ECS Tuning Teflon Oval Shifter Bushings, Turner Motorsport Poly Shifter Arm Bushing, and Turner Motorsport DSSR included in the kit. These parts working together will eliminate all side-to-side and fore-and-aft slop, giving you significantly more engaging shifts. Included: Turner Motorsport Double Shear Selector Rod (DSSR) - Replaces BMW 25111221657 (09/89+) & 25111220838 (Up to 09/89) Turner Motorsport Polyurethane Shifter Arm Bushing ECS Teflon Oval Shifter Bushings Plastic Washers Rubber Shifter Boot Dowel & Bearing Pins Shifter Ball Bushing Shifter Rod Joint Necessary Hardware
Show More Show Less

Packaged by Turner - Corporate Logo
T#:15744037
Part#: 332075727170-KT
Back Ordered
Sale - Save 10% $ 1,188.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,069.72 USD
Sale - Save 10%
$ 1,188.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,069.72 USD
Includes left and right axles and hardware

Packaged by Turner - Corporate Logo
T#:29898446
Part#: G260SEALKT
In Stock
Sale - Save 26% $ 20.99

This product was last offered at the strikethrough price on
04-10-2026

$ 15.60 USD
Free Shipping on orders $49 and up
Sale - Save 26%
$ 20.99

This product was last offered at the strikethrough price on
04-10-2026

$ 15.60 USD
Free Shipping on orders $49 and up
Includes input, output, and selector rod seals. Great for servicing your transmission during a clutch and flywheel job.
Performance Tool - Corporate Logo
T#:1855988
Part#: W83013
Ships in 3 Business Days
$ 20.40 USD
Free Shipping on orders $49 and up
Used on ear-type clamps found on CV joints, hoses, and some fuel filters.
Performance Tool - Corporate Logo
T#:5095675
Part#: W1139
Ships in 2 Business Days
$ 10.99 USD
Free Shipping on orders $49 and up
Unique double threaded cap fits both quart and gallon size containers.


OEM Lemforder Rubber Transmission Mount - 22316799330 - E30 E36 E84 E...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Lemforder - Corporate Logo
T#:397937
Part#: 22316799330
In Stock
$ 10.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 10.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

Lemforder BMW Rubber Mounting

Lemforder is a supplier of parts directly to BMW and other major automotive manufacturers. In order to save on the cost of parts, we are able to provide you these parts directly from Lemforder at a much lower cost than if bought directly from BMW. These parts have the same high quality and reliability, just without the BMW logos.

This item fits the following BMW Chassis:
E30,E36,E84, E89 Z4

Show More Show Less
ACT - Corporate Logo
T#:14221778
Part#: BM12-HDG4
Ships in 6 Business Days
Sale - Save 10% $ 1,559.00

This product was last offered at the strikethrough price on
07-20-2026

$ 1,403.10 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 1,559.00

This product was last offered at the strikethrough price on
07-20-2026

$ 1,403.10 USD
Free Shipping on orders $49 and up
BM12-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines.
Show More Show Less