For performance-driven enthusiasts seeking weight savings and premium quality, ECS Titanium Wheel Bolts are the ultimate choice. These bolts, designed for both BMW and MINI vehicles, offer a significant weight reduction of 50% compared to steel bolts of the same size. Crafted from annealed titanium alloy using CNC machining, these bolts ensure reduced rotational mass on the vehicle. Tested to meet class 10.9 fastener proof load requirements, they exhibit exceptional durability and resilience.

Product Benefits:

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for high strength
• Tested to class 10.9 fastener proof load requirements for durability
• Conical seat design ensures proper fitment
• Ideal for performance-oriented enthusiasts seeking weight savings

*Note: When installing wheel spacers, add the size of the spacer to the length of the OE wheel bolt for proper fitment (ex. 26mm Length OE Wheel Bolt + 15mm Wheel Spacer = Requires a 41mm Length Bolt).

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left- and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 175mm (6.89") to 235mm (9.25") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 175 - 235mm range of adjustment.

BMW enthusiasts looking to fabricate a custom exhaust project will find quality and price-friendly options in the ECS Tuning Universal Exhaust catalog. These select items feature the same premium benefits as our In-House Engineered Exhaust Systems, ensuring confidence in their quality and longevity.

Part Design:

• Made from T304 Stainless Steel for corrosion resistance with an attractive brushed finish
• 3.0" outside diameter (OD)
• 1.5mm (.060") wall thickness tubing for durability
• U-Bend Centerline Radius - 5.0" @ 180° angle
• Leg Length "A" - 7.0"
• Leg Length "B" - 14.0"
• Leg Length "C" - 27.0"

Product Development:

• Developed top-tier exhaust components through our In-House Engineered Exhaust Systems
• Direct-fit components for specific European applications now available for custom exhaust projects

Installation and Support:

• Universal parts with no direct fitment to any particular vehicle
• Custom welding and fabrication required
• Special prep/clean procedures must be followed for proper welding due to brushed finish

Elevate your BMW with ECS Tuning Universal Exhaust components, designed for quality and durability in custom exhaust projects.

Upgrade your BMW's hose clamps with the 77-85mm - 3/4" Band Hose Clamp from Turner Motorsport. These full 304 stainless steel clamps offer convenience and quality without the dealership price tag. German-style T-bolts allow for easy adjustment to your required diameter, ensuring a secure fit every time.

• Made of durable 304 stainless steel for long-lasting performance
• German-style T-bolt design for easy size adjustment
• Convenient band widths for versatile applications
• Quality alternative to dealership pricing

Includes connector housing with terminals and seals. Commonly used for the idle air control valve (IACV).

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12521706096 - Commonly used for the idle air control valve (IACV).

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Upgrade your BMW with ECS Tuning's Stainless Steel Hose Clamps, designed for convenience and durability. With various band widths and German-style T-bolts, these clamps offer easy adjustment to your required diameter. Say goodbye to dealer pricing and enjoy the quality you love at ECS Tuning.

• Full stainless steel construction
• Various band widths available
• German-style T-bolts for easy adjustment
• Convenient solution for hose clamp replacement

Upgrade your exhaust system with the Stainless Steel Oxygen Sensor (O2) Weld Bung (M18x1.5mm). This high-quality weld bung is made from stainless steel, ensuring durability and resistance to corrosion. It features M18x1.5mm threads, making it compatible with most oxygen sensors. Perfect for custom exhaust setups or replacing damaged bungs, this weld bung is a must-have for any automotive enthusiast.

• Made from high-quality stainless steel for durability and corrosion resistance
• M18x1.5mm threads ensure compatibility with most oxygen sensors
• Ideal for custom exhaust setups or replacing damaged bungs
• Essential for automotive enthusiasts looking to upgrade their exhaust system

The ECS Tuning Center Support Bearing Brace is engineered to improve drivetrain performance and longevity. The factory center support bearing features an internal rubber bushing to reduce NVH (noise, vibration, and harshness) transmission to the cabin. Unfortunately, this material choice falls short when it comes to performance applications. Under extreme load conditions, this bushing is prone to flexing, resulting in driveshaft misalignment. To address the shortcomings of the factory rubber center support carrier design, ECS engineers developed a set of precision-fit, solid rubber bushings that secure tightly around the existing driveshaft bearing. Constructed from 30A durometer rubber, this material eliminates bushing deflection while maintaining minimal noise, vibration, and harshness (NVH). By eliminating deflection, this innovative solution not only improves durability but also ensures a significantly longer service life than the OEM center support bearing—making it an excellent upgrade for aging BMW chassis.

The polyurethane bushings are surrounded by a robust 6061-T6 billet aluminum bracket designed with strength and reliability in mind. This bracket features a split design for hassle-free installation, eliminating the need to remove the driveshaft assembly entirely. To install the ECS Center Support Carrier, simply cut around your existing bearing, remove the factory brace, and clamp on your new bushings and bracket. This user-friendly approach saves time and simplifies maintenance or upgrades. Two stainless steel socket head screws are used to fasten the two-piece bracket, offering corrosion resistance and secure clamping under high torque and stress. This combination of materials and design ensures dependable performance and long-lasting durability, even in demanding applications.

Features & Benefits:

Performance-Designed Bushing Upgrade: 30A durometer rubber is used to eliminate bushing deflection while maintaining a smooth, quiet ride.
Improved Longevity: Solid rubber bushing construction offers a longer lifespan than the thin factory rubber, ideal for enthusiasts looking to eliminate future CSB-related problems.
Billet Aluminum Bracket: The upgraded bushings are encased in a 6061-T6 billet aluminum bracket for enhanced durability and improved performance.
Easy Installation: Both the bushings and the bracket feature a two-piece split design, allowing for seamless installation without driveshaft removal.
Reduce Deflection, Increase Rigidity: Designed with performance in mind, this upgrade eliminates excessive driveshaft movement for improved alignment and efficiency.
Kit Includes:

ECS Driveshaft Center Support Bushings
ECS Driveshaft Center Support Carrier
(2) Stainless Steel Hex Head Screws
Medium Strength Threadlocker
Installation Instructions:

ECS has provided a detailed, start-to-finish installation guide to aid in the process of installing your new Driveshaft Center Support Carrier.

ECS Tuning offers high-quality extended wheel bolts, available individually or with matching spacers for precise fitment. These bolts comply with ISO 898 class 10.9 standards, meeting strict material properties and strength requirements. Lab-tested to ensure they meet these stringent specifications.

• Bolt Specifications:
• Diameter: 12mm
• Thread Pitch: 1.5mm
• Length: 43mm

Note: When using wheel spacers, add the spacer size to the OE wheel bolt length for accurate fitment (e.g., 27mm OE Wheel Bolt + 15mm Wheel Spacer = Requires a 42mm Length Bolt)

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair

BMW & MINI ECS UNIVERSAL Exhaust Tips - 3.5" Titanium - Matte Finish - Pair are the perfect upgrade for those seeking the most attractive exhaust tips on the market. Exclusively offered by Turner Motorsport, these tips boast a sleek, matte titanium finish and a slant-cut, single-wall outlet that delivers a stunning visual appeal. Engineered for durability, they feature chrome-plated nuts, 304SS cap screws, and clamps.

Key Benefits:

• Stunning matte titanium finish
• Durable construction with 304SS cap screws and clamps
• Single-wall, slant-cut outlet for a sleek appearance
• Universal fitment for BMW and MINI vehicles
• Easy to install with basic modifications

Dimensions:

• Inlet Size: 2.5"
• Overall Length: 6.0" (4.5" Tip + 1.25" Clamping Surface)
• Outlet Size: 3.5"
• Outlet Style: Single Wall, Slant Cut

Modification may be required for proper fitment. This part is UNIVERSAL fitment, meaning not a direct fit to your vehicle. You must measure before ordering.

ECS 1/2"/12mm Band Hose Clamp - 20-32mm

Once again, ECS Tuning has found a way to make life easier for working on your car. Need new hose clamps but don't want to wait to order it from the dealership or pay more than you should for a hose clamp? That's where we come in! These are full 304 stainless steel hose clamps with various band widths for your convenience. They are German style using T-bolts to adjust in size to your required diameter. Never pay dealer pricing again, but still get the quality you love here at ECS Tuning.

• Premium 304 stainless steel construction for durability
• German-style T-bolt design for easy size adjustment
• Versatile band widths cater to different hose sizes
• Eliminates the need for expensive dealership purchases
• Ensures secure and reliable hose connections

Revamp Your Suspension with the BMW & MINI Coilover Wrench Set

• Compatible with BMW and MINI models for versatile use
• Durable construction ensures long-lasting performance
• Ergonomic design provides comfortable handling during installation
• Allows for precise adjustment of coilovers for optimal ride quality

Upgrade your BMW or MINI's suspension system with the BMW & MINI Coilover Wrench Set. This set is compatible with various BMW and MINI models, offering versatile compatibility for a wide range of vehicles. Constructed from durable materials, these wrenches are built to withstand the rigors of frequent use and provide long-lasting performance. The ergonomic design ensures comfortable handling during installation, reducing fatigue and allowing for more efficient work. With the BMW & MINI Coilover Wrench Set, you can easily adjust your coilovers to achieve the optimal ride quality for your vehicle.

Upgrade your hose fittings with the Adjustable Hose Clamp. Designed for versatility and reliability, this clamp provides a secure and adjustable solution for various hose sizes. With its durable construction and easy-to-use design, it ensures leak-free connections in automotive, plumbing, and industrial applications. Say goodbye to loose hoses and enjoy peace of mind with this essential hose clamp.

• Provides secure and adjustable solution
• Durable construction for reliability
• Easy-to-use design for convenience
• Suitable for automotive, plumbing, and industrial applications

ECS Tuning proudly introduces extended wheel bolts specifically designed for your Mini. These bolts can be obtained individually or in conjunction with precisely matched spacers, eliminating the guesswork in achieving the correct fitment. Crafted to meet the stringent ISO 898 class 10.9 standards, these high-quality bolts adhere to strict guidelines concerning material properties, hardening, tempering requirements, and proof load strength. Rigorously lab-tested for compliance, these fasteners ensure unparalleled reliability and safety.

Specifications for the bolts:

• Diameter - 12mm
• Thread Pitch - 1.5mm
• Length - 28mm

Note: When integrating wheel spacers, it's crucial to add the spacer size to the OE wheel bolt length to ensure proper fitment (e.g., 27mm Length OE Wheel Bolt + 15mm Wheel Spacer = Requires a 42mm Length Bolt).

• Precisely matched for accurate fitment
• Complies with ISO 898 class 10.9 standards
• Lab-tested for reliability and safety
• Detailed bolt specifications provided for easy selection

Flush License Plate Bolt - 12mm

Upgrade your vehicle's aesthetics with the Flush License Plate Bolt - 12mm, designed to seamlessly blend into your license plate for a sleek appearance. Crafted from durable materials, this bolt offers both style and functionality. Its low-profile design ensures a clean look while providing secure attachment. Enhance your vehicle's exterior with this easy-to-install accessory.

• Sleek and seamless appearance
• Durable construction for long-lasting use
• Low-profile design for a clean look
• Easy installation process

12x1.5 Conical Seat Wheel Nuts with 17mm Hex Head

ECS Tuning introduces 12x1.5 conical seat wheel nuts featuring a 17mm hex head, tailored for vehicles that have transitioned to a stud-style mounting system. These open-ended wheel nuts are the perfect solution for accommodating longer studs without any fitment concerns.

Product Details:

• Thread Size: 12x1.5
• Hex Head Size: 17mm
• Designed for vehicles with stud-style mounting
• Open-ended design to accommodate longer studs

Transform Your BMW's Exhaust System with ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Set of Four

• Elevates the appearance of your BMW's exhaust system
• Crafted from durable titanium for long-lasting performance
• Features a stylish burnt finish for a unique look
• Comes in a set of four for a complete upgrade

Upgrade the look of your BMW's exhaust system with the ECS UNIVERSAL Exhaust Tips - 4.0" Titanium - Burnt Finish - Set of Four. Made from high-quality titanium, these exhaust tips are built to last and provide a touch of elegance to your vehicle. The burnt finish adds a distinct visual appeal, making your BMW stand out from the crowd. With four tips included in the set, you can achieve a comprehensive upgrade for your exhaust system.

Upgrade your Mini Cooper's hose clamping mechanism with the 3/8" (9mm) Band Hose Clamp from ECS. Designed for precision and durability, this clamp ensures a secure fit for hoses, preventing leaks and ensuring optimal performance. Crafted to meet high-quality standards, it provides reliable sealing and resilience against varying temperatures and pressures. Easy to install and engineered for long-term use, this hose clamp is an essential addition to maintain your Mini Cooper's functionality.

• Precision-engineered for Mini Cooper hoses
• Ensures a secure and leak-free fit
• Resilient against temperature and pressure variations
• Easy to install and durable for long-term use