Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:
This H&R-Bilstein package replaces the M5's standard shocks and springs with more-capable bits from Bilstein and H&R. Using a stiffer spring will mean less weight transfer and bodyroll in corners and a slightly lower ride height for better aesthetics. This package will bolt in to any E34 M5 with the optional E34 Self-Leveling Delete Kit.
H&R Sport springs lower the M5's ride height by .8" in front and 0.3" in the rear and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 20% stiffer than the stock original springs.
We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. On the E34, suspension travel is crucial especially with a lowered ride height. This suspension is stiff but delivers uncompromising handling. These fit with the stock strut and shock mounts, making for an easy and clean install. Because BMW used multiple combinations of front strut and strut mount we will need specific information from your car in order to send you the correct parts.
Parts list:
Fitment note: some very late E34 models were equipped with an EDC electronic damping system. This must be disabled to use this suspension.
This item fits the following BMWs:
1991-1995 E34 BMW M5 sedan
The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.
This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.
Together they make this job simple and easy and ensure a tight fit with a new ring.
| Wheel Specs | |
| Fitment: | Mostly Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 22.9 |
| Profile: | 3, deep dish |
This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).
Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.
Choose from soft alcantara or perforated air leather with either a silver or black anodized base.
BMW enthusiasts will love the APEX wheels, which are stronger and lighter than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter, reducing unsprung weight and allowing for the best performance possible. The spokes and barrel are designed to provide ample room for brake systems, while retaining a classic motorsports theme that complements the aggressive BMW style. These qualities ensure your BMW will look and perform at its best with plenty of confidence.
Upgrade your BMW with APEX wheels to experience top-tier performance and a striking appearance.
| Wheel Specs | |
| Fitment: | Mostly Rear |
| Size: | 19x9.5" |
| Offset (mm): | 22 |
| Weight (lbs): | 22.9 |
| Profile: | 3, deep dish |
Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.
To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!
See kit contents below for a complete list of included components.
Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.
This control arm is an aftermarket OEM alternative part that comes with a 1-year warranty. They use the same designs as the original BMW parts on your car so they meet OEM standards for fitment and operation. We have compared these parts to the Genuine BMW and OEM brands and found few differences. This package is an unbeatable money-saving bundle to restore your E34's precise handling and steering. We also offer all of the OE or OEM brands if you are more comfortable with those levels of quality and performance or are planning to track or autocross your car (the cast components of the aftermarket kit will not be as good as the OEM parts on the track).
The aftermarket arm has the bushing pre-installed. The OEM and BMW arms include the bushing but it must be pressed into the arm by a qualified technician.
This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i (Sedan and Touring)
| Wheel Specs | |
| Fitment: | Mostly Rear |
| Size: | 19x10" |
| Offset (mm): | 25 |
| Weight (lbs): | 23.5 |
| Profile: | 3, deep dish |
Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.
This control arm is an aftermarket OEM alternative part that comes with a 1-year warranty. They use the same designs as the original BMW parts on your car so they meet OEM standards for fitment and operation. We have compared these parts to the Genuine BMW and OEM brands and found few differences. This package is an unbeatable money-saving bundle to restore your E34's precise handling and steering. We also offer all of the OE or OEM brands if you are more comfortable with those levels of quality and performance or are planning to track or autocross your car (the cast components of the aftermarket kit will not be as good as the OEM parts on the track).
The aftermarket arm has the bushing pre-installed. The OEM and BMW arms include the bushing but it must be pressed into the arm by a qualified technician.
This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i (Sedan and Touring)
Looking to upgrade your rear sway bar? This Genuine BMW sway bar from the European M5 Nurburgring handling package features a 19mm diameter for increased handling performance and reduced body roll.
Genuine BMW Stabilizer, Rear - D=19mm
Fits the following BMW chassis:
E34 BMW
Enhance your BMW E9X E36 E46 E60 with the 17" APEX ARC-8 Square Wheel Set - Race Silver, a perfect choice for performance-driven enthusiasts. These wheels from APEX feature a race-inspired design that improves both aesthetics and functionality on the track and street.
BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters: