BMW 5 Series E34 (1987-1995)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

GSP North America - Corporate Logo
T#:389693
Part#: NCV27526
In Stock
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E24 BMW 633CSi M6

E28 BMW 524td 528e 533i 535i 535is M5

E34 BMW 530i 535i 540i M5

Show More Show Less
GSP North America - Corporate Logo
T#:389698
Part#: NCV27527
Ships in 2 Business Days
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E34 BMW 525i 525iT 530i 535i

Show More Show Less
Active Autowerke - Corporate Logo
T#:397222
Part#: 14-009
In Stock
$ 56.99

This product was last offered at the strikethrough price on
06-18-2026

$ 52.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 56.99

This product was last offered at the strikethrough price on
06-18-2026

$ 52.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Plastic thermostat housing cracked on your M50?

Here are your choices: you can wait for the plastic factory thermostat housing cover to break and cause major overheating. (Even with a new stock cover, it won’t take long.) Or you can install a thoughtfully engineered all-aluminum thermostat housing cover from Active Autowerke and never experience this type of failure again. Currently there is no factory upgraded part to this problem. This is an aluminum extruded part that has all of the openings machine properly to fit like factory; from the mounting bolt holes, the seating of the thermostat to the sealing opening for the ORANGE gasket. Forged to exact factory tolerances, everything fits and this unit is a true easy bolt-on – especially suited for racing or load conditions like heavy traffic, where engine temp can rise rapidly. The housing is guaranteed never to break from overheating or over-tightening, and its CNC machined surface ensures a precise seat.

Unit comes complete with a new ORANGE sealing gasket; a new thermostat is recommended but not included.
For hotter climates, a 71 degree thermostat is recommended over the 82 degree unit.

Anything and everything BMW is the mantra at Active Autowerke. Since 1981 they have been serving the BMW community with custom turbocharger kits to a myriad of other innovative and inspiring performance parts.
Show More Show Less

Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 1 Business Day
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less

GSP North America - Corporate Logo
T#:389683
Part#: 274125
Ships in 2 Business Days
$ 72.99 USD
Free Shipping on orders $49 and up

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible 
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 
3/1991-1995 E34 BMW 525i 530i 535i 540i 
11/1991-1994 E32 BMW 735i 735il 740o 740il 750il 
3/1992-1999 E31 BMW 840ci 850ci 850csi 
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less
Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs

KMAC - Corporate Logo
T#:389654
Part#: 193316-1J
In Stock
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less

Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 6 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Complete set of spark plug sockets.

Sunex - Corporate Logo
T#:5229449
Part#: 224UMD
Ships on Aug 17, 2026
$ 29.99 USD
Free Shipping on orders $49 and up
Deep Impact Socket on a swivel.
Sunex - Corporate Logo
T#:2528135
Part#: 3301D
Ships on Aug 17, 2026
5% off MSRP $ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD
Free Shipping on orders $49 and up
Designed for impact use
Sunex - Corporate Logo
T#:5269512
Part#: 3670SED
Ships on Aug 17, 2026
$ 65.99 USD
Free Shipping on orders $49 and up
CR-MO alloy steel for long life


Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships on Aug 17, 2026
$ 113.91 USD
Free Shipping
$ 113.91 USD
Free Shipping
Radius V-Groove design creates an anti-slip while also preventing round-off.
KMAC - Corporate Logo
T#:389663
Part#: 193416-1J
Special Order: No Guaranteed ETA
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included. This KMAC part number replaces BMW part number 31 33 1 139 437, the strut mount with the integrated upper spring plate.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1988-8/92  E34 BMW  525i
1989-1995  E34 BMW  530i 535i 540i M5
1988-1994  E32 BMW  735i 735il 740i 740il 750il
Show More Show Less
KMAC - Corporate Logo
T#:3546
Part#: 193326
Special Order: No Guaranteed ETA
$ 269.95 USD
Free Shipping
$ 269.95 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set.

Fits the following BMW:
E23 BMW 7 series
83-89 E24 BMW 6 series
82-88 E28 BMW 5 series
E32 BMW  7 series
E34 BMW  5series
Show More Show Less

Sunex - Corporate Logo
T#:385986
Part#: 6602LPD
Back Ordered
$ 704.99 USD
$ 704.99 USD
Designed to reach far under your vehicle with this long and low chassis

Sunex - Corporate Logo
T#:5269518
Part#: 367132D
In Stock
6% off MSRP $ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping on orders $49 and up
Make oil filter housing removal simple
Sunex - Corporate Logo
T#:386187
Part#: 1006D
Ships in 6 Business Days
$ 306.99 USD
$ 306.99 USD
These jack stands have steel base pads for superior stability

Sunex - Corporate Logo
T#:385984
Part#: 6603ASJD
Ships in 6 Business Days
$ 720.99 USD
$ 720.99 USD
Need a light weight(under 60 Lbs) and heavy duty floor jack? This is the one for you
Sunex - Corporate Logo
T#:2528142
Part#: SX113D
Ships on Aug 17, 2026
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
With great comfort and design the air ratchet wrench is the perfect tool

Sunex - Corporate Logo
T#:2528137
Part#: 9710MD
Ships on Aug 17, 2026
$ 31.99 USD
Free Shipping on orders $49 and up
Great for lines hoses with nuts and offset nuts.

Sunex - Corporate Logo
T#:5229429
Part#: 910MTAS
Ships on Aug 17, 2026
$ 154.99 USD
Free Shipping
$ 154.99 USD
Free Shipping
Used with a torque wrench to access obstructed fasteners
Sunex - Corporate Logo
T#:5269496
Part#: 9704
Ships on Aug 17, 2026
5% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
Made of heat treated alloy steel
Sunex - Corporate Logo
T#:5229434
Part#: 3930
Ships on Aug 17, 2026
$ 83.99 USD
Free Shipping on orders $49 and up
An all inclusive brake piston retractor set


Sunex - Corporate Logo
T#:2706159
Part#: 426MDD
Ships on Aug 17, 2026
$ 15.99 USD
Free Shipping on orders $49 and up
Throw this thin wall impact on for whatever you need!
Sunex - Corporate Logo
T#:5269515
Part#: 3670S
Ships on Aug 17, 2026
$ 62.99 USD
Free Shipping on orders $49 and up
CR-MO alloy steel for long life
Sunex - Corporate Logo
T#:1793488
Part#: 1006C
Ships on Aug 17, 2026
$ 186.99 USD
$ 186.99 USD
Used in pairs for supporting automotive vehicles after lifting

Sunex - Corporate Logo
T#:2706156
Part#: 418MZTD
Ships on Aug 17, 2026
$ 10.99 USD
Free Shipping on orders $49 and up
Throw this thin wall impact for whatever you need!

Sunex - Corporate Logo
T#:2528144
Part#: 9726D
Ships on Aug 17, 2026
15% off MSRP $ 68.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.80 USD
Free Shipping on orders $49 and up
15% off MSRP
$ 68.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 57.80 USD
Free Shipping on orders $49 and up
Keep this great tool set near by and ready to use.
Sunex - Corporate Logo
T#:2706153
Part#: 2505WD
Ships on Aug 17, 2026
20% off MSRP $ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
20% off MSRP
$ 19.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
Forged from the finest chrome-molybdenum alloy steel, the best choice for strength

Sunex - Corporate Logo
T#:2750699
Part#: 9914MA
Ships on Aug 17, 2026
$ 107.39 USD
Free Shipping
$ 107.39 USD
Free Shipping
Fully polished drop forged CR-V alloy steel for maximum strength and service life
Sunex - Corporate Logo
T#:2498418
Part#: 3911D
Ships on Aug 17, 2026
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This set covers 8 different functions

Sunex - Corporate Logo
T#:5282862
Part#: 2850
Ships on Aug 17, 2026
11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
11% off MSRP
$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

Sunex - Corporate Logo
T#:1046638
Part#: 1003C
Ships on Aug 17, 2026
$ 103.99 USD
Free Shipping on orders $49 and up
Use these large base ratcheting jack stands for a very stable base
Sunex - Corporate Logo
T#:5229461
Part#: 20250
Ships on Aug 17, 2026
$ 218.99 USD
Free Shipping on orders $49 and up
Accurate to ±3% clockwise and ±6% counterclockwise
Sunex - Corporate Logo
T#:34885399
Part#: 6809A
Ships on Aug 17, 2026
$ 227.99 USD
$ 227.99 USD


KMAC - Corporate Logo
T#:389656
Part#: 193316-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1984-1991  E30 BMW  318i 318is 318ic 325e 325es 325i 325ic 325is M3
1982-1988  E28 BMW  528e 533i 535i 535is M5
1993-1995  E34 BMW  525i
1982-1989  E24 BMW  633csi 635csi M6
Show More Show Less