BMW 5 Series E34 (1987-1995)

APEX M12x1.5mm BMW 5 Lug Stud Kit - Hex head Black Finish - 75mm Leng...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:637384

Part#: APEXM12STDKIT5HX

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340098

Part#: AEROCATCH

In Stock

$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD

Add to Wish List

Starting at $ 82.99 USD

Add to Wish List

As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

Show More Show Less

Aluminum Thermostat Housing Kit - M50

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:397222

Part#: 14-009

In Stock

$ 56.99

This product was last offered at the strikethrough price on
06-18-2026

$ 52.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 56.99

This product was last offered at the strikethrough price on
06-18-2026

$ 52.99 USD

Limited Qty Sale

Add to Wish List

Plastic thermostat housing cracked on your M50?

Here are your choices: you can wait for the plastic factory thermostat housing cover to break and cause major overheating. (Even with a new stock cover, it won’t take long.) Or you can install a thoughtfully engineered all-aluminum thermostat housing cover from Active Autowerke and never experience this type of failure again. Currently there is no factory upgraded part to this problem. This is an aluminum extruded part that has all of the openings machine properly to fit like factory; from the mounting bolt holes, the seating of the thermostat to the sealing opening for the ORANGE gasket. Forged to exact factory tolerances, everything fits and this unit is a true easy bolt-on – especially suited for racing or load conditions like heavy traffic, where engine temp can rise rapidly. The housing is guaranteed never to break from overheating or over-tightening, and its CNC machined surface ensures a precise seat.

Unit comes complete with a new ORANGE sealing gasket; a new thermostat is recommended but not included.
For hotter climates, a 71 degree thermostat is recommended over the 82 degree unit.

Anything and everything BMW is the mantra at Active Autowerke. Since 1981 they have been serving the BMW community with custom turbocharger kits to a myriad of other innovative and inspiring performance parts.

Show More Show Less

E34 M5 JB Racing Lightweight Aluminum Flywheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3772

Part#: 520-090-240

Ships in 4 Business Days

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

Stock Flywheel Weight = 16.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1991-1995 E34 BMW M5

Show More Show Less

E30 325i, E34 525i (M20) JB Racing Lightweight Aluminum Flywheel (Rep...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:385699

Part#: 520-060-228

Ships on Jul 24, 2026

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991 E30 BMW 325i 325ic 325is (with single-mass flywheel)
1989-1990 E34 BMW 525i (with single-mass flywheel)

Show More Show Less

18x10.5" ET22 Brushed Clear APEX VS-5RS Forged BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:4607237

Part#: VS5RS18105ET22BC

Ships in 5 Business Days

$ 799.00 USD

Add to Wish List

Qty

$ 799.00 USD

Add to Wish List

Active Autowerke Rotrex Traction Fluid - One Liter

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:397307

Part#: 12-032

Ships in 1 Business Day

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).

Show More Show Less

APEX EC-7 19x9.5" ET22 Silver Wheel 22.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201363

Part#: EC71995ET22RS

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

Silver 19x10" ET25 APEX EC-7 Wheel.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to many BMW models and may fit other models when used with a specific spacer. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

BMC Filter Cleaning Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201362

Part#: EC71995ET22SMBK

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19" Staggered Wheel Set - Race Silver

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560861

Part#: EC71995H105SKT

Ships in 5 Business Days

$ 1,876.00 USD

Add to Wish List

Qty

$ 1,876.00 USD

Add to Wish List

APEX wheels are stronger, lighter wheels than typical cast wheels thanks to their Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more! This reduces unsprung weight, allow for the best performance possible. The spokes and barrel are designed to allow as much room as possible for brake systems, while retaining a classic motorsports theme that matches perfectly with the aggressive BMW style. Thanks to these qualities, these wheels will keep your looks and performing at your best with plenty of confidence!

Show More Show Less

APEX EC-7 19"Staggered Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560858

Part#: EC71995H105AKT

Ships in 5 Business Days

$ 1,876.00 USD

Add to Wish List

Qty

$ 1,876.00 USD

Add to Wish List

APEX EC-7 19" Staggered Wheel Set -- 19x9.5" / 19x10.5" This set of 9.5" and 10.5" EC-7 wheels is an easy staggered fitment for the E46 M3, E6X M5/6 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9.5" ET22 on the front and a 10.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

Active Autowerke Signature Trunk Emblem

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

E34 535i JB Racing Lightweight Aluminum Flywheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:647

Part#: 520-170-240

Ships in 1 Business Day

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Show More Show Less

APEX ARC-8 17x9" ET30 Matte Bronze Wheel 16.55lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:637215

Part#: ARC8179ET30MBZ

Special Order: No Guaranteed ETA

Sale - Save 15% $ 339.00

This product was last offered at the strikethrough price on
06-30-2026

$ 288.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 339.00

This product was last offered at the strikethrough price on
06-30-2026

$ 288.15 USD

Add to Wish List

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201373

Part#: EC71910ET25AN

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

19" APEX EC-7 Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19593915

Part#: EC71995H105

Back Ordered

Starting at $ 1,876.00 USD

Add to Wish List

Starting at $ 1,876.00 USD

Add to Wish List

APEX EC-7 19" Staggered Wheel Set -- 19x9.5" / 19x10.5" This set of 9.5" and 10.5" EC-7 wheels is an easy staggered fitment for the E46 M3, E6X M5/6 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9.5" ET22 on the front and a 10.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

BMC Performance Air Filter - E30, E36, E28, E34, E32, E31

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:398680

Part#: FB117/01

Back Ordered

$ 71.99 USD

Add to Wish List

Qty

$ 71.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

APEX EC-7RS Forged Wheels - Staggered Set - Anthracite 19x9.5" ET22/1...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:7371478

Part#: EC7RS1995E22ANKT

Ships in 5 Business Days

$ 3,336.00 USD

Add to Wish List

Qty

$ 3,336.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2 Front Deep Concave - 19x9.5" ET22 Anthracite APEX EC-7RS Forged BMW Wheels 2 Rear Deep Concave - 19x10.5" ET25 Anthracite APEX EC-7RS Forged BMW Wheel The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. EC-7RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX SM-10 Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:600439

Part#: SM101995SBKT1

Ships in 5 Business Days

$ 2,006.00 USD

Add to Wish List

Qty

$ 2,006.00 USD

Add to Wish List

APEX SM-10 19" Staggered Wheel Set -- 19x9.5" / 19x10.5" This set of 9.5" and 10.5" SM-10 wheels is an easy staggered fitment for the E46 M3, E6X M5/6 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9.5" ET22 on the front and a 10.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX Solid Gloss Black BMW Center Caps - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

APEX ARC-8 17" Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:386491

Part#: E34ARC8178510SBK

Ships in 5 Business Days

Sale - Save 15% $ 1,236.00

This product was last offered at the strikethrough price on
06-30-2026

$ 1,050.60 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,236.00

This product was last offered at the strikethrough price on
06-30-2026

$ 1,050.60 USD

Add to Wish List

Specifications: Color - Satin Black Size Front - 17x8.5" ET20 Size Rear - 17x10" ET25

18" APEX EC-7RS Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560884

Part#: EC7RS1895105

Ships in 5 Business Days

Starting at $ 2,870.00 USD

Add to Wish List

Starting at $ 2,870.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 18x9.5 ET22 18x10.5 ET22 APEX EC-7RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX SM-10RE Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478174

Part#: 10RE199510SBKT

Ships in 5 Business Days

$ 3,456.00 USD

Add to Wish List

Qty

$ 3,456.00 USD

Add to Wish List

Apex SM-10RE 19x9.5" ET22 & 19x10" ET25 Staggered Wheel Set The SM-10RE is the forged Enduro version of our popular SM-10 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Upgrade the appearance and reduce the weight of your BMW with Apex's SM-10RE wheels! Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Retaining the same ten-spoke layout seen on the Flow Formed SM-10 and ultra light Forged SM-10RS, the all-new Forged SM-10RE gets dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a fully redesigned and reinforced outer lip. All said and done, the SM-10RE is rated at an impressive 2100 lb max load, a five-hundred pound increase over the lightweight SM-10RS. These fortifying measures have been countered with a number of unique weight-saving features as well. Just like the Sprint Line Forged Wheels, the Enduro Line SM-10RE sports deep spoke scalloping intended to machine away excess material without decreasing strength or stiffness. Going a step further, the SM-10RE does away with the center cap support, the outer barrel remains unpainted, showcasing a beautiful raw aluminum, and outer lip pocketing is present between the spokes (an Apex first!). All together, these weight-saving features result in a wheel that is shockingly light considering its impressive stiffness and load rating. The SM-10RE is significantly stronger and stiffer compared to both its Sprint Line and Flow Formed counterparts, and even more so than most competitors. The intention is for the Enduro SM-10RE to become the new de facto wheel of choice for track day enthusiasts and racers looking for a ten-spoke wheel design. For racers, track day goers and car enthusiasts in general who won’t put up with overly light wheels that bend at the sight of steep curbing, the SM-10RE is the answer!

Show More Show Less

APEX EC-7RS 18" Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19461783

Part#: EC7RS1895105SBKT

Ships in 5 Business Days

$ 2,870.00 USD

Add to Wish List

Qty

$ 2,870.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 18x9.5 ET22 18x10.5 ET22 APEX EC-7RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX SM-10RE Staggered Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478173

Part#: 10RE199510ANKT

Ships in 5 Business Days

$ 3,456.00 USD

Add to Wish List

Qty

$ 3,456.00 USD

Add to Wish List

Apex SM-10RE 19x9.5" ET22 & 19x10" ET25 Staggered Wheel Set The SM-10RE is the forged Enduro version of our popular SM-10 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Upgrade the appearance and reduce the weight of your BMW with Apex's SM-10RE wheels! Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Retaining the same ten-spoke layout seen on the Flow Formed SM-10 and ultra light Forged SM-10RS, the all-new Forged SM-10RE gets dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a fully redesigned and reinforced outer lip. All said and done, the SM-10RE is rated at an impressive 2100 lb max load, a five-hundred pound increase over the lightweight SM-10RS. These fortifying measures have been countered with a number of unique weight-saving features as well. Just like the Sprint Line Forged Wheels, the Enduro Line SM-10RE sports deep spoke scalloping intended to machine away excess material without decreasing strength or stiffness. Going a step further, the SM-10RE does away with the center cap support, the outer barrel remains unpainted, showcasing a beautiful raw aluminum, and outer lip pocketing is present between the spokes (an Apex first!). All together, these weight-saving features result in a wheel that is shockingly light considering its impressive stiffness and load rating. The SM-10RE is significantly stronger and stiffer compared to both its Sprint Line and Flow Formed counterparts, and even more so than most competitors. The intention is for the Enduro SM-10RE to become the new de facto wheel of choice for track day enthusiasts and racers looking for a ten-spoke wheel design. For racers, track day goers and car enthusiasts in general who won’t put up with overly light wheels that bend at the sight of steep curbing, the SM-10RE is the answer!

Show More Show Less

BMW APEX ARC-8 17" Square Wheel Set - Race Silver - E9X E36 E46 E60 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:29068508

Part#: ARC817930RSKT

Ships in 2 Business Days

Sale - Save 15% $ 1,356.00

This product was last offered at the strikethrough price on
06-30-2026

$ 1,152.60 USD

Add to Wish List

Qty

Sale - Save 15%

$ 1,356.00

This product was last offered at the strikethrough price on
06-30-2026

$ 1,152.60 USD

Add to Wish List

Enhance your BMW E9X E36 E46 E60 with the 17" APEX ARC-8 Square Wheel Set - Race Silver, a perfect choice for performance-driven enthusiasts. These wheels from APEX feature a race-inspired design that improves both aesthetics and functionality on the track and street.

Square set includes four 17"x9.0" wheels
Race Silver finish for a sporty look
Designed for BMW E9X, E36, E46, E60 models
Lightweight construction enhances vehicle agility

Show More Show Less

APEX EC-7RS Forged Wheels - Staggered Set - Brushed Clear 19x9.5" ET2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:7371479

Part#: EC7RS1995E22BCKT

Ships in 5 Business Days

$ 3,616.00 USD

Add to Wish List

Qty

$ 3,616.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2 Front Deep Concave - 19x9.5" ET22 Brushed Clear APEX EC-7RS Forged BMW Wheels 2 Rear Deep Concave - 19x10.5" ET25 Brushed Clear APEX EC-7RS Forged BMW Wheel The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. EC-7RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" VS-5RS Forged Wheels - Staggered Set - Choose Your Finish ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19593921

Part#: VS5RS1995105

Ships in 5 Business Days

Starting at $ 3,556.00 USD

Add to Wish List

Starting at $ 3,556.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 19x9.5" ET22 19x10.5" ET25 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

Apex ML-10RT 18x11 ET44 5x120mm 72.56mm in Race Silver

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:35492004

Part#: ML10RT1811ET44

Ships in 5 Business Days

$ 769.00 USD

Add to Wish List

Qty

$ 769.00 USD

Add to Wish List

The Forged ML-10RT is the answer for enthusiasts craving a wheel design that combines classic motorsport styling with modern monoblock forging technology. This wheel was initially developed in the shadows by one of our Senior Engineers exclusively for his BMW E46 M3 widebody race car, and after sharing photos of the prototypes on social media, we received an overwhelming amount of interest from the community to bring it to market. Just like our existing flagship motorsport designs, the ML-10RT was designed from the ground up by our team of in-house engineers and underwent the same extensive FEA analysis and third party testing. It’s made from the highest grade 10K ton forged 6061-T6 aluminum, and utilizes true motorsport blanks, which is a vital component in our ability to deliver vehicle-specific optimizations like maximum concavity, optimal spoke design and critical brake clearance. The end result is a perfect blend of weight savings, added stiffness and strength, all while staying true to the classic motorsport design language we all love. The ML-10RT also sports our reinforced Sprint Spec inner lip and a 1600lb (1650lb for Porsche applications) load rating, which is the same lip design and load ratings we use for our popular Forged Sprint Line.

Show More Show Less

17" APEX ARC-8 Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19395568

Part#: ARC817930SBZSQ

Ships in 3 Business Days

Sale - Save 15% $ 1,356.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,152.60 USD

Add to Wish List

Sale - Save 15%

$ 1,356.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,152.60 USD

Add to Wish List

Apex ARC8 17x9 ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

VS-5RS Forged Wheels - Staggered Set - Choose Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Aggressive setup. May require fender rolling, camber, and specific tire sizing.

T#:19593911

Part#: VS5RS1895T22

Ships in 5 Business Days

Starting at $ 2,996.00 USD

Add to Wish List

Starting at $ 2,996.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 18x9.5" ET22 18x10.5" ET22 APEX VS-5RS Forged BMW Wheel On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX ARC-8 Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19593914

Part#: ARC81995105

Ships on Oct 22, 2026

Sale - Save 15% $ 1,814.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,541.90 USD

Add to Wish List

Sale - Save 15%

$ 1,814.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,541.90 USD

Add to Wish List

Specifications: Size Front - 19x9.5" ET22 Size Rear - 19x10.5" ET22

19" APEX SM-10 Staggered Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19825230

Part#: SM11995105ST

Ships on Oct 22, 2026

Sale - Save 15% $ 1,814.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,541.90 USD

Add to Wish List

Sale - Save 15%

$ 1,814.00

This product was last offered at the strikethrough price on
06-30-2026

Starting at $ 1,541.90 USD

Add to Wish List

19x9.5" ET22 or ET33/19x10.5" ET22 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX Wheels Metal Valve Stem - Silver - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593646

Part#: HW-OEM-VALVE-SV

Ships in 2 Business Days

$ 17.00 USD

Add to Wish List

Qty

$ 17.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX EC-7 19x10" ET25 Satin Black Wheel 23.5lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201371

Part#: EC71910ET25SMBK

Ships in 5 Business Days

$ 469.00 USD

Add to Wish List

Qty

$ 469.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x10"
Offset (mm):	25
Weight (lbs):	23.5
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10.5" ET22 Anthracite Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201376

Part#: EC719105ET22AN

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18" APEX EC-7 Staggered Wheel Set - Choose Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560882

Part#: EC71895H105

Ships in 5 Business Days

Starting at $ 1,676.00 USD

Add to Wish List

Starting at $ 1,676.00 USD

Add to Wish List

Specifications: Size Front - 18x9.5" ET40 Size Rear - 18x10.5" ET42

17" APEX VS5RS Square Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19395572

Part#: VS5RS17930SQ

Ships in 5 Business Days

Starting at $ 2,636.00 USD

Add to Wish List

Starting at $ 2,636.00 USD

Add to Wish List

Apex VS5RS 17x9 ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

APEX Wheels Metal Valve Stem - Black - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593644

Part#: HW-OEM-VALVE-BK

Ships in 2 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

17" APEX ARC-8RT Square Wheel Set - Choose Your Finish!

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40342823

Part#: ARC8RT179

Ships in 5 Business Days

Starting at $ 2,396.00 USD

Add to Wish List

Starting at $ 2,396.00 USD

Add to Wish List

Apex ARC-8RT 17x9" ET30 Square Wheel Set Introducing the Apex ARC-8RT, part of our Touring Line of forged wheels. A timeless classic, reborn as a fully forged wheel. Fully forged 6061-T6 aluminum Reinforced Sprint™ spec inner lip Stronger, yet thinner spokes Deeper concave profile Improved brake clearance OEM center cap compatibility Unmatched replacement program Lifetime structural warranty Independently tested *Aftermarket wheels above stock sizes may require certain amounts of fitment modification to prevent damage to the wheel or interior wheel well components. Fender rolling, spacers, or camber adjustment may be necessary for perfect fitment.

Show More Show Less

APEX Wheels Metal Valve Stem - Anthracite - BMW & MINI

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:593645

Part#: HW-OEM-VALVE-GM

Ships in 2 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

APEX Wheels metal valve stems come in 3 colors that compliment wheels in any finish. Made in Germany, they are guaranteed to fit OEM Huf/Beru TPMS sensors and can also be installed without them. Valve stems are sold individually Made in Germany Guaranteed to fit APEX wheels, and also work with a variety of OEM and aftermarket wheels Guaranteed to fit OEM Huf/Beru TPMS sensors Not compatible with VDO TPMS sensors Work without the use of TPMS sensors Available in Silver, Anthracite, and Black Black and Anthracite valve stems come with a color-matched knurled, metal cap Silver valve stems comes with a knurled color-matched plastic cap

Show More Show Less

APEX EC-7 19x10.5" ET22 Satin Black Wheel 23.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201374

Part#: EC719105ET22SMBK

Ships in 5 Business Days

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

19x10.5" ET22 APEX EC-7 Wheel 23.9lbs.

Wheel Specs
Fitment:	Front or Rear
Size:	19x10.5"
Offset (mm):	22
Weight (lbs):	23.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

Apex ML-10RT18x9.5 ET22 Wheels

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:35492008

Part#: ML10RT1895ET22

Ships in 5 Business Days

$ 738.00 USD

Add to Wish List

Qty

$ 738.00 USD

Add to Wish List

18x9.5 ET22 5x120mm/ 72.56mm Race Silver

APEX EC-7 19x9.5" ET22 Anthracite Wheel 22.9lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201364

Part#: EC71995ET22AN

Ships in 5 Business Days

$ 459.00 USD

Add to Wish List

Qty

$ 459.00 USD

Add to Wish List

19x10" ET25 APEX EC-7 Wheel 23.5lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	22
Weight (lbs):	22.9
Profile:	3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18x9.5" ET22 Satin Bronze APEX ARC-8 BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:18700354

Part#: ARC81895ET22SBZ

Ships in 5 Business Days

Sale - Save 15% $ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

Qty

Sale - Save 15%

$ 399.00

This product was last offered at the strikethrough price on
06-30-2026

$ 339.15 USD

Add to Wish List

APEX EC-7 19x9.5" ET43 Silver Wheel 23lbs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:201357

Part#: EC71995ET43RS

Ships in 5 Business Days

$ 426.00 USD

Add to Wish List

Qty

$ 426.00 USD

Add to Wish List

19x9.5" ET43 APEX EC-7 Wheel 23lbs.

Wheel Specs
Fitment:	Mostly Rear
Size:	19x9.5"
Offset (mm):	43
Weight (lbs):	23
Profile:	2, moderate dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7RS 18" Staggered Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19461771

Part#: EC7RS1895H105AKT

Back Ordered

$ 2,916.00 USD

Add to Wish List

Qty

$ 2,916.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 18x9.5 ET22 18x10.5 ET22 Anthracite APEX EC-7RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

APEX EC-7 19" Staggered Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19560862

Part#: EC71995H105MBKT

Back Ordered

$ 1,876.00 USD

Add to Wish List

Qty

$ 1,876.00 USD

Add to Wish List

APEX EC-7 19" Staggered Wheel Set -- 19x9.5" / 19x10.5" This set of 9.5" and 10.5" EC-7 wheels is an easy staggered fitment for the E46 M3, E6X M5/6 and Z4M models. These are a direct fit with no spacers or fender rolling required. We use a 9.5" ET22 on the front and a 10.5" ET22 on the rear. These are only slightly wider than the stock sizes. The rear wheels have a deeper concave face than the fronts, emphasizing the RWD chassis and adding some muscularity to the stance. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still lightweight. The wheels are around 10 lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less