BMW Brakes & Brake Parts for BMW E36 (1992-1998) M3

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Pagid Front & Rear Brake Pads
• Pagid Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW M3 S52/S50
Z3 BMW M Coupe/Roadster S52/S54

E46 M3 CSL brakes fit the E36 M3 for a bolt-on size enhancement and more stopping power. The CSL rotors are a full 30mm (1.18") larger than the stock E36 M3 discs. The larger rotor puts out more braking torque and can handle more friction and heat than stock. With the special brackets these larger rotors are able to bolt-on to the E36 M3 hub using your original calipers and lines. Simply bolt them on using the new caliper bracket. The E36 M3 CSL upgrade is a moderate upgrade over stock compared to a StopTech or Brembo Big Brake Kit but has lower upfront cost, lower consumable cost (pads and rotors), and has a wide range of pad choices (any brake pad for an E36 M3 or E46 M3 will work).

We offer these brakes with three rotor choices -

• Stoptech (Centric) CSL/ZCP Cross-Drilled and Floating
• Original M3 CSL/ZCP Cross-Drilled and Floating
• ECS 2-piece Cross Drilled and Slotted Floating (pictured)

With more braking torque, the brake bias is changed. For the street, you will notice more stopping power and more "bite" from the front brakes. You may not notice the front brakes are working harder. If you're using this kit on the track it will be more important to balance the brake bias using different front-rear pad compounds. The front brakes will be doing more work than before to slow the car down and you will need to balance that with a more aggressive pad on the rear. You may notice the front tires locking up sooner, especially in wet conditions. Contact us to discuss track pads for your situation.

Wheel fitment: 18" wheels are strongly recommended for brake clearance although some 17" wheels will work (if they clear a BBK they will work with these)

Whether you are looking to replace your E36 M3's worn out stock components or simply upgrade your existing braking system for a more aggressive and responsive feel, this kit has been hand pick by us to suit your needs. Featuring Hawk HPS 5.0 performance brake pads for increased bite and better heat resistance, these pads offer significantly improved braking power and less dust, compared to the stock brake pads, without compromising the ABS system and without the harshness typically associated with performance style pads.

Kit Components:

• Front and Rear Pagid Premium Coated Rotors
• Front and Rear Hawk HPS 5.0 Street Sport Brake Pads
• Front and Rear Brake Rotor Set Screws
• TYP 200 Brake Fluid - 1 Liter
• Front and Rear Brake Sensors
• ATE Plastilube Anti-Squeal Compound

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our 20 years of BMW tuning experience. We seek out high-quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time. 

This kit fits the following BMWs:
1995-1999 E36 BMW M3

These pads were originally equipped on the Euro E46 M3 models and the US M3 ZCP, as well as Euro-spec M models from the 1990s. Owners of the E46 M3 will know that the stock pads are already quite 'aggressive' from the factory with a lot of initial bite. The initial bite was built into the pad to stop criticism of BMW's lack of 'performance' brakes. Instead of building the M models with exotic - and expensive - multi-piston calipers, BMW engineers turned up the braking power in their pads. These pads go a step further as the pads that originally came on the Euro E46 M3 and all E46 M3 ZCPs. For the street, these are excellent brake pads with excellent feel and performance. The only downside is the dust that comes from an organic pad. The problem with many aftermarket and OEM pads is that they do not match the same level of initial bite as the stock OE BMW pads. This can make the brakes feel 'weak' and 'numb' even though the pads are working properly. If you want to maintain your braking feel, these are the best to use.

Although these pads were originally designed for M cars, they fit other models as well, making them a great first-step upgrade for better braking.

Price is for one set of pads - enough to replace the pads on both front calipers.

If you are looking for front brake rotors, 2282445446

These front pads fit the following BMWs:
1988-1994 E32 BMW 735i 735il 740i 740il 750il (more aggressive fitment)
1989-1995 E34 BMW 525i 530i 535i 540i M5 (more aggressive fitment)
1994-1998 E36 BMW M3 (more aggressive fitment than US-spec)
1998-2002 Z3 BMW M Roadster M Coupe (more aggressive fitment)
1999-2005 E46 BMW 330i 330ci 330xi M3 (more aggressive fitment for 330)
2003-2008 E85 E86 BMW Z4 3.0si Z4 M Roadster M Coupe (more aggressive fitment for 3.0si)

These brake pads are Genuine BMW and will perform exactly the same as the pads your vehicle came with from day one. Genuine pads offer a long life, low dust, and a consistent, comfortable feel that many aftermarket pads do not offer.

This set includes both the front and rear brake pads.

This item fits the following BMWs:
1995-1999 E36 BMW M3