Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
If your M50, M52, or M54 engine takes a few seconds to build oil pressure after sitting, there's a good chance that your factory oil filter housing drain back valve has failed. Over time, the factory plastic check valve degrades, allowing oil to drain completely out of the housing and back into the oil pan while sitting. Every cold start essentially becomes a dry start, resulting in a loud ticking noise and causing unnecessary wear on your engine's internals.
Unfortunately, BMW does not offer this check valve as a standalone part, forcing you to purchase a costly, complete oil filter housing assembly just to fix one failed plastic component. Thankfully, our team of BMW enthusiasts took note of this common failure mode and designed a permanent, cost-effective fix.
Our Billet Oil Filter Housing Drain-Back Valve is designed as a direct-fit upgrade for your factory oil filter housing. CNC-machined from high-strength billet aluminum, this upgraded valve restores positive sealing to keep the oil filter housing fully primed. Maintaining this hydraulic prime ensures rapid oil pressure stabilization upon startup, directly mitigating dry-start bearing wear and top-end lifter starvation without requiring the purchase of a complete OEM housing assembly.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The 6-speed Getrag 420G transmission, found in the European E36 M3 Evolution and E46 M3, has become an increasingly popular swap amongst E36 owners. Its increased strength, longevity, and overdrive sixth gear make it a great choice for both track cars and daily drivers. Unfortunately, many of the components needed to complete this transplant have become hard to source. Despite increased demand from enthusiasts, BMW has blocked the sale of European E36 M3 parts into North America.
With this in mind, our team of engineers went to work designing a direct replacement and upgrade for the unavailable, 420G-specific shifter arm. Precision-machined from 6061-T6 billet aluminum and clear anodized, our replacement carrier is durable, lightweight, and built to last. It is dimensionally identical to the OEM carrier, ensuring compatibility with the OEM shift carrier bushing, shift lever, and our Double-Adjustable Short Throw Shifter Kit (T#557266).
Features & Benefits:
6061-T6 billet aluminum construction provides excellent durability and longevity Mil-spec clear anodized for superior corrosion resistance Dimensionally identical to its OEM counterpart, ensuring compatibility with all factory shifter components Confirmed compatibility with the Turner Motorsport Double-Adjustable Short-Throw Shifter Kit (T#557266) Product Development:
Our E36 420G Shifter Arm was designed, engineered, tested, and quality inspected by our Research and Development team. We strive for nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The 6-speed Getrag 420G transmission, found in the European E36 M3 Evolution and E46 M3, has become an increasingly popular swap amongst E36 owners. Its increased strength, longevity, and overdrive sixth gear make it a great choice for both track cars and daily drivers. Unfortunately, many of the components needed to complete this transplant have become hard to source. Despite increased demand from enthusiasts, BMW has blocked the sale of European E36 M3 parts into North America.
Recognizing this issue, we set out to develop a replacement for the unavailable, 420G-specific selector rod. Like all OEM selector rods, the factory part uses single-shear attachment, allowing for deflection within the shifter linkage. The result? Vague, imprecise gear selections that detract from your overall driving experience. The dual-shear selector rod (DSSR) design spreads the torsional force of gear selections across the selector rod joint, reducing deflection for increased precision. Our dual-shear selector rod is precision-machined from durable 304 stainless steel to further reduce deflection and resist corrosion.
Features & Benefits:
Provides a more positive feel in the shifter by reducing play in the linkage due to minimized deflection Manufactured from 304 stainless steel for superior corrosion resistance and durability Replacement for 25112228055 (European E36 M3 Evolution) Works with the OEM shift lever and OE-style short-throw shifter kits Kit Includes:
Turner Motorsport Dual-Shear Selector Rod (DSSR) Turner Motorsport DSSR Connecting Pin (2) OE Shifter Lever Circlip (2) Product Development:
Our E36 420G DSSR was designed, engineered, tested, and quality inspected by our Research and Development team. We strive for nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
Lowering your BMW does wonders for appearance and handling, but it also changes suspension geometry in ways that can hurt performance. As ride height changes, angles between the sway bar, control arms, and axles shift, which can cause binding, poor fitment, and added stress on the factory fixed-length end links. This is especially noticeable on cars equipped with coilover suspension, where slight height differences side to side can preload the sway bar and lead to inconsistent handling.
Our team of dedicated BMW enthusiasts set out to address this common issue with Adjustable Rear Sway Bar End Links. Designed with performance in mind, they offer a fully adjustable range from 100mm to 120mm, helping eliminate preload, restore proper suspension alignment, and improve overall sway bar function. Constructed from high-quality billet aluminum, these end links are built to outlast the factory cast components and are finished with a black anodized coating for excellent corrosion resistance. Laser-etched wrench size markings allow for quick, easy adjustments while installed on the vehicle. Unlike the factory design, these end links use spherical rod ends at the control arm for increased responsiveness and a more direct handling feel. These end links feature a bolt-through bushing design, which is compatible with most adjustable aftermarket sway bars. Mounting hardware is included for easy installation.
Features & Benefits:
Adjustable from 100mm to 120mm Strong 6061-T6 billet aluminum construction Black anodized finish resists corrosion Spherical rod ends improve response and handling feel Polyurethane bushing with knurled bore helps retain grease Fits most aftermarket sway bars with bolt-through attachment Laser-etched markings for quick and easy adjustments
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Lowering your BMW does wonders for appearance and handling, but it also changes suspension geometry in ways that can hurt performance. As ride height changes, angles between the sway bar, control arms, and axles shift, which can cause binding, poor fitment, and added stress on the factory fixed-length end links. This is especially noticeable on cars equipped with coilover suspension, where slight height differences side to side can preload the sway bar and lead to inconsistent handling.
Our team of dedicated BMW enthusiasts set out to remedy this common issue with a set of Adjustable Rear Sway Bar End Links. Designed with performance in mind, they offer a fully adjustable range from 100mm to 120mm, helping eliminate preload, restore proper suspension alignment, and improve overall sway bar function. Constructed from high-quality billet aluminum, these end links are built to outlast the factory cast components and are finished with a black anodized coating for excellent corrosion resistance. Laser-etched wrench size markings allow for quick, easy adjustments while installed on the vehicle. Unlike the factory design, these end links use spherical rod ends at the control arm for increased responsiveness and a more direct handling feel. A unique knurled bushing design also ensures compatibility with the OEM sway bar, offering a first-to-market solution for enthusiasts looking to retain factory components.
Features & Benefits:
Adjustable from 100mm to 120mm Strong 6061-T6 billet aluminum construction Black anodized finish resists corrosion Spherical rod ends improve response and handling feel Polyurethane bushing with knurled bore helps retain grease Fits factory rear sway bars on E23, E24, E28, E30, and E36 Laser-etched markings for quick and easy adjustments
This product was last offered at the strikethrough price on
05-27-2026
The factory cast-iron exhaust manifolds originally fitted to M50, M50TU, and S50B30US-powered E36s are notorious performance bottlenecks, plagued by excessive weight and a tendency to crack over time. Our Equal Length "Shorty" Exhaust Headers offer the ultimate remedy. Engineered specifically to maximize exhaust flow and encourage exhaust gas scavenging, these headers unleash a noticeable boost in overall engine efficiency and grant your M5X that crisp, aggressive inline-six growl without sacrificing low-end torque.
Unlike restrictive, uneven OEM cast-iron manifolds, our design utilizes high-quality T304 stainless steel construction shaped by precision mandrel bending. This specialized process ensures a uniform pipe diameter throughout every bend to maximize exhaust gas velocity and eliminate internal turbulence. The flow-optimized, equal-length primary runners merge seamlessly into a heavy-duty cast stainless steel collector, creating a restriction-free transition that dramatically improves scavenging. Our refined design completely transforms your driving experience, delivering a deeper, more pronounced tone under load while remaining perfectly civilized and drone-free at cruising speeds.
Built to endure years of high-RPM track abuse and extreme thermal stress, these headers are engineered with longevity in mind. Every joint is meticulously TIG-welded for exceptional structural integrity, ensuring the tubes can handle intense heat cycling without cracking. To guarantee a permanent, leak-free seal, the headers feature thick, precision laser-cut flanges that aggressively resist warping over time. Best of all, this is a true, headache-free upgrade; they drop directly into the E36 chassis and mate perfectly with your factory mid-pipe using OEM gaskets and hardware, requiring absolutely no custom fabrication or modification.
Over time, the factory valve cover hardware on M50, M50TU, M52, M52TU, M54, S50 (US), and S52 engines is subjected to continuous heat cycling, oil vapor, and moisture, causing original cap nuts to oxidize, corrode, or thread-strip during routine maintenance. Our Polished Valve Cover Cap Nut serves as a direct replacement designed to address these common failure points while improving upon overall engine bay aesthetics.
Because maintaining precise gasket compression is critical to preventing oil leaks, these cap nuts and washers are machined directly to OE-style dimensions. This exact fitment allows for direct compatibility with original and replacement valve cover studs (see T#55317643) and ensures the hardware can be torqued precisely to OEM specifications without guesswork. Manufactured to grade 8.8 structural strength standards, the hardware maintains the necessary clamp force required under normal and high-performance engine operating conditions.
To resist corrosion, both the cap nut and washer undergo an electroless nickel plating process during production. Unlike standard zinc coatings that dull or rust over time, electroless nickel provides a uniform layer of corrosion resistance that withstands long-term chemical exposure and extreme temperature swings while giving the hardware a polished, high-end appearance. Each cap nut assembly includes an OE rubber washer seal, ensuring a tight, leak-free barrier that prevents oil from escaping through the mounting studs.
