Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers rev’d up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
?Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our Axle Back exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Durable 304SS
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section

Enhance power and driving excitement in your BMW 318ti or Z3's 4 or 6-cylinder engine with the proven performer from Supersprint – a free-flowing muffler that serves as an excellent foundation for vehicle modification.

• Unleashes the engine's distinctive sound
• Compatible with 318ti or Z3's 4 or 6-cylinder engines
• Connects to stock or aftermarket center section
• Includes all hangers and hardware for easy installation
• 36-month unlimited mileage warranty for peace of mind
• Supersprint's 60+ years of expertise in BMW exhausts
• Extensive testing with real race teams for optimal feedback
• Dyno testing, high-quality materials, and race team feedback ensure performance
• Offers a perfect balance of quality, performance, and a stellar reputation

• Aggressive, Throaty Sound
• No Highway Drone!
• Cat-Back Rear Muffler
• Made in the USA
• Lifetime Warranty

Scorpion Exhaust - BMW E36 325/328 1991 To 1998 Cat-back System is the premium performance upgrade for enthusiasts looking to enhance their BMW E36’s exhaust sound and performance. Crafted specifically for the 1991 to 1998 BMW E36 325/328 models, this cat-back exhaust system by Scorpion is designed to maximize airflow, increase horsepower, and produce an aggressive exhaust note.

Constructed from high-quality stainless steel, this exhaust system ensures durability and corrosion resistance, providing long-lasting performance on both the street and the track. It’s precision-engineered to fit seamlessly with the factory mounting points, allowing for easy installation without the need for modifications.

• High-grade stainless steel construction for durability and corrosion resistance
• Cat-back design enhances airflow and performance without compromising emissions compliance
• Produces a deep, sporty exhaust tone ideal for BMW E36 325/328 models
• Direct-fit installation with factory mounting points, no modifications required
• Available through Turner Motorsport, a trusted source for BMW performance parts

Ideal for BMW E36 enthusiasts, the Scorpion Exhaust cat-back system is an exceptional choice for those looking to elevate their vehicle’s performance and sound quality.

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary. Bosch Part # 13 231. Replacement for BMW part # 11781735499 and 11781738282.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1988-1991 E30 BMW 325i 325is 325ix 325ic
1992-1995 E36 BMW 318i 318is 318ic 318ti
1992-1995 E36 BMW 325i 325is 325ic M3
1993-1995 E34 BMW 530i
1993-3/1994 E34 BMW 540i
1993-1994 E32 BMW 740i 740il
1988-1994 E32 BMW 750il
1990-1994 E31 BMW 850i 850ci

Our Signature Exhaust is often considered to be the most iconic, period-correct system available for your BMW E36. Extensive R&D, flawless design and superior construction are all reasons why our BMW E36 M3 Gen 3 Signature Exhaust is the number one choice for the E36 enthusiast today. This BMW exhaust is eye catching, built of 100% new Brushed Finish 304 stainless steel, sporting large 54mm twin inlet pipes, smooth mandrel bends, and dual 76mm tips with the Active Autowerke Logo embossed allow this BMW exhaust system to not only perform at a level above all other but also allow one to enjoy its beauty. 

Engineering with the ease of install in mind this is a true bolt on system like no other. Performance gains are definite and satisfying, thanks to substantially higher flow rates over the stock system. The full Active Autowerke BMW E36 M3 Exhaust system weighs in at just 34lbs allowing for some much needed weight savings over the stock system. Emitting a F1 type sound when bolted onto a stock car with it's unique hexagon style muffler this system has become the benchmark by which all other E36 systems are judged. Pair it with our BMW Cold Air Intake for the best power gains! 

Kit Features:

• Double-walled 76 mm stainless steel tips
• Dyno-tested performance
• New Brushed Finish 100% 304 stainless steel
• Thicker exhaust flanges for a tighter seal
• Large 54 mm twin inlet pipes
• Mandrel Bent Piping
• Illustrated instruction manual
• One year warranty
• True Bolt-on Design

Fits the following vehicles:
1995-1998 E36 BMW 325i/is 328i/is M3

Experience Enhanced Exhaust Sound Control with Vibrant Performance Bottle-Style Resonators

Vibrant Performance introduces their Bottle-Style resonators engineered with an authentic straight-through perforated core enveloped in premium multi-layer sound suppression materials. These resonators adeptly mitigate exhaust noise while maintaining unrestricted exhaust flow. Crafted from high-quality T304 stainless steel, Vibrant Performance offers a range of applications, ensuring a perfect fit for various vehicle models.

Enhance your BMW's exhaust system with the all-new Magnaflow Universal Muffler, available at an exceptionally affordable price point. Say goodbye to noisy and inefficient mufflers with this high-performance solution.

The Race Series muffler is meticulously designed for uncompromising performance, delivering an aggressive racecar-inspired sound. Its genuine straight-through design ensures the utmost high RPM power, while the 2.5" or 3" perforated core effectively eliminates backpressure, optimizing exhaust flow.

This muffler stands as the ideal choice for dedicated racers, turbocharged engines, nitrous oxide fuel systems, or vehicles equipped with wild cam applications. It boasts a 2.25" inlet, a 24" overall length, and a 4" diameter round, angle-cut tip.

Kindly note that this muffler is of universal fit for rear exhaust and may necessitate welding or fabrication for installation, as it is not a direct bolt-on component for any specific vehicle.

The Dinan sport muffler is designed to compliment the E36 M3 and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Dual 2.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan sport muffler is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
1992-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3

Enhance Your BMW with the Magnaflow Universal Muffler

Looking for an affordable way to replace your BMW's muffler and transform its exhaust note? Your search ends here! The brand-new Magnaflow Universal Muffler is your budget-friendly solution, designed to elevate your BMW's sound and style.

Key Features:

• Budget-Friendly: The Magnaflow Universal Muffler is the go-to choice for budget-conscious BMW owners seeking an economical way to enhance their vehicle's sound.
• Enhanced Sound: This muffler delivers an improved exhaust note, creating a deeper, more attractive tone that will make your BMW stand out from the crowd.
• Universal Fit: With its universal fit, it is compatible with a range of BMW models, ensuring a seamless installation process.
• Quality Construction: Crafted from durable materials, this muffler is built to last, providing long-term performance and value.
• Turner Motorsport Approved: Endorsed by Turner Motorsport, a renowned name in the BMW community, you can trust this muffler to meet your expectations for quality and performance.

Say goodbye to that noisy ride and give your BMW the sound it deserves with the Magnaflow Universal Muffler. Upgrade today!