BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

JB Racing - Corporate Logo
T#:3771
Part#: 520-010-240
Ships in 9 Business Days
$ 602.00 USD
Free Shipping
$ 602.00 USD
Free Shipping
As Used on Project E36 M3
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe
Show More Show Less
Autel - Corporate Logo
T#:641919
Part#: AUL1SENSOR
In Stock
Sale - Save 29% $ 60.96

This product was last offered at the strikethrough price on
11-07-2026

$ 43.02 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 60.96

This product was last offered at the strikethrough price on
11-07-2026

$ 43.02 USD
Free Shipping on orders $49 and up
12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use
JB Racing - Corporate Logo
T#:3769
Part#: 520-040-215
Ships on Dec 3, 2026
11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
11% off MSRP
$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Show More Show Less

JB Racing - Corporate Logo
T#:3774
Part#: 520-030-240
Ships on Dec 8, 2026
$ 714.00 USD
Free Shipping
$ 714.00 USD
Free Shipping

BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel offers a significant performance upgrade by replacing the heavy stock steel flywheel with a much lighter aluminum version. This JB Racing flywheel is designed to deliver faster acceleration, improved throttle response, and enhanced overall performance for your BMW.

The modern stock flywheels are burdened with additional components meant to dampen vibrations, which unfortunately adds unnecessary weight. The JB Racing aluminum flywheel, weighing just 10.0 lbs compared to the stock 25.0 lbs, eliminates this excess mass, allowing more power to reach the wheels and reducing the energy wasted on spinning the flywheel. Engine builders prioritize lightweight flywheels when optimizing race engines for maximum efficiency, and the difference is especially noticeable in how quickly the engine revs and reaches its power band.

This JB Racing lightweight flywheel is a direct replacement for the stock flywheel and is compatible with the factory BMW organic clutch. This compatibility ensures that you can use standard replacement clutches, making maintenance simple and cost-effective. The flywheel can also be resurfaced for a fresh contact surface, so there’s no need to buy a new one when it’s time to replace the clutch.

While single-mass aluminum flywheels like this one may result in slightly more noise and vibration compared to dual-mass designs, this can be managed with heavier transmission oil and sprung hub clutches, such as the Sachs Performance clutch available through Turner Motorsport.

  • Faster acceleration: Reduces the rotational mass for quicker engine response.
  • Improved throttle response: Engine revs more freely and builds RPM faster.
  • Enhanced performance: More power delivered to the wheels for better driving dynamics.
  • Cost-effective maintenance: Compatible with factory BMW organic clutches and can be resurfaced.
  • Direct replacement: Easy upgrade with no modifications required.

Vehicle Compatibility:

  • 1996-1999 E36 BMW 328i, 328is, 328ic
  • 1997-1998 Z3 BMW Z3 2.8
Show More Show Less

Sunex - Corporate Logo
T#:391150
Part#: SUU884506
In Stock
9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD
Free Shipping on orders $49 and up
3/8" drive socket with 5/8" opening for most spark plugs
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping

Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader
JB Racing - Corporate Logo
T#:340509
Part#: WCCLUTCH
Ships in 5 Business Days
Starting at $ 1,999.00 USD
Free Shipping
Starting at $ 1,999.00 USD
Free Shipping
The ultimate in a racing flywheel and clutch! This was developed for use in our E36 and E46 World Challenge Touring Cars. The combined weight of the clutch and flywheel is only 11lbs!!!

This multi-disc (2 or 3 disc setups) offer a minimal flywheel mass (enough to include a factory ring gear for the starter) and a small 5.5" clutch assembly rated to 500hp. By saving as much weight as possible less energy is used in simply spinning the flywheel/clutch assembly and that means a lot more power and torque is available at the drive wheels. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines and this is among the most advanced and lightest racing clutch kits available for your BMW race car.

The JB Ultra-Light Performance racing clutch is available in 2-disc or 3-disc setups. We used the 5.5"/140mm size in our Touring Cars but larger sizes are available too. This is a turn-key racing clutch and flywheel kit that you don't have to engineer or spec yourself. This is the same clutch setup we used when winning the 2003 and 2004 Touring Car Championships - the quality and performance is unquestionable. That series also employed standing starts at each race and this clutch setup performed flawlessly with nearly a full season of racing on them before needing a change.

JB Ultra-Light flywheels include:
  • precision CNC machined aluminum flywheel
  • zero-balanced up to 10,000 RPM
  • replaceable hardened steel clutch friction surface
  • Helicoil threaded inserts
  • high-strength grade 10.9 hardware
  • multi-disc racing clutch with Performance racing pressure plate
  • JB Racing throw-out bearing with custom bobbin
    This is a true racing clutch and will not function as a street-able clutch at all. It behaves as an on/off switch with no slippage allowed. Extreme care must be used when driving on to trailers and around the paddock. But when driven correctly the life span of this clutch is amazing - we could get a full season of racing a 300hp M54 from this clutch setup including standing starts at every race! Replacement clutch components and flywheel rebuilding are available.

    A properly adjusted clutch stop is required for use with this clutch kit.

    Stock Flywheel + Clutch Weight = 45+lbs
    JB Ultra-Light Flywheel & Clutch Weight = 11lbs

    This item fits the following BMWs:
    1992-1999 E36 BMW 325i 325is 328i 328is M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2005 E85 BMW Z4 2.5i (5-speed)
  • Show More Show Less

    Sunex - Corporate Logo
    T#:641915
    Part#: 8845D
    Ships in 6 Business Days
    $ 141.99 USD
    Free Shipping
    $ 141.99 USD
    Free Shipping
    Complete set of spark plug sockets.

    Autel - Corporate Logo
    T#:2914129
    Part#: AL529HD
    Ships in 6 Business Days
    $ 264.99 USD
    Free Shipping on orders $49 and up
    Autel’s latest member of its code reader family of tools, the AL529HD can not only diagnose OBDII/EOBD-compatible vehicles but also heavy duty vehicles utilizing SAE-J1939 and SAE-J1708 protocols.
    Sunex - Corporate Logo
    T#:5269512
    Part#: 3670SED
    Ships on Dec 8, 2026
    $ 65.99 USD
    Free Shipping on orders $49 and up
    CR-MO alloy steel for long life
    Sunex - Corporate Logo
    T#:642035
    Part#: 9914A
    Ships on Dec 8, 2026
    $ 113.91 USD
    Free Shipping
    $ 113.91 USD
    Free Shipping
    Radius V-Groove design creates an anti-slip while also preventing round-off.


    Sunex - Corporate Logo
    T#:5282862
    Part#: 2850
    Back Ordered
    11% off MSRP $ 135.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 119.99 USD
    Free Shipping
    11% off MSRP
    $ 135.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 119.99 USD
    Free Shipping
    Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models
    Sunex - Corporate Logo
    T#:5229449
    Part#: 224UMD
    Ships on Dec 8, 2026
    $ 29.99 USD
    Free Shipping on orders $49 and up
    Deep Impact Socket on a swivel.
    Sunex - Corporate Logo
    T#:2528135
    Part#: 3301D
    Ships on Dec 8, 2026
    5% off MSRP $ 26.20

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 24.89 USD
    Free Shipping on orders $49 and up
    5% off MSRP
    $ 26.20

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 24.89 USD
    Free Shipping on orders $49 and up
    Designed for impact use

    Sunex - Corporate Logo
    T#:385986
    Part#: 6602LPD
    Back Ordered
    $ 704.99 USD
    $ 704.99 USD
    Designed to reach far under your vehicle with this long and low chassis

    Sunex - Corporate Logo
    T#:5269518
    Part#: 367132D
    Back Ordered
    6% off MSRP $ 17.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 15.95 USD
    Free Shipping on orders $49 and up
    6% off MSRP
    $ 17.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 15.95 USD
    Free Shipping on orders $49 and up
    Make oil filter housing removal simple
    Autel - Corporate Logo
    T#:5663676
    Part#: AULTS508K1
    Ships in 6 Business Days
    $ 739.99 USD
    Free Shipping
    $ 739.99 USD
    Free Shipping
    Pinpoint and replace bad TPMS Sensors

    Autel - Corporate Logo
    T#:2914145
    Part#: BT506
    Ships in 6 Business Days
    $ 402.99 USD
    Free Shipping
    $ 402.99 USD
    Free Shipping
    The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
    Show More Show Less
    Sunex - Corporate Logo
    T#:385984
    Part#: 6603ASJD
    Ships in 6 Business Days
    $ 720.99 USD
    $ 720.99 USD
    Need a light weight(under 60 Lbs) and heavy duty floor jack? This is the one for you

    Sunex - Corporate Logo
    T#:386187
    Part#: 1006D
    Ships in 6 Business Days
    $ 306.99 USD
    $ 306.99 USD
    These jack stands have steel base pads for superior stability

    Autel - Corporate Logo
    T#:2914136
    Part#: MSULTRA
    Ships in 6 Business Days
    $ 12,306.99 USD
    Free Shipping on orders $49 and up
    The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.
    Autel - Corporate Logo
    T#:2914140
    Part#: MV400-55
    Ships in 6 Business Days
    $ 405.99 USD
    Free Shipping on orders $49 and up
    This premier Autel MaxiVideo MV400 digital videoscope is an ideal tool for examining difficult- to- reach areas normally hidden from sight.
    Autel - Corporate Logo
    T#:40782369
    Part#: AUL-TS508WFK-1
    Ships in 6 Business Days
    $ 419.99 USD
    Free Shipping on orders $49 and up
    The TS508WFK-1 is a TPMS service tool that features Quick and Advance modes of TPMS service and a TPMS status screen. It can read/activate/relearn all known sensors, has 4 methods of MX-Sensor programming, and performs placard value resets on supported vehicles. This scanner displays on-tool MX-Sensor relearn procedures including OBDII and can do key fob signal tests. The TS508WFK-1 includes an OBDII cable, a 1-year tool warranty, and free lifetime software updates are available with purchase.
    Show More Show Less


    Sunex - Corporate Logo
    T#:1046638
    Part#: 1003C
    Ships on Dec 8, 2026
    $ 103.99 USD
    Free Shipping on orders $49 and up
    Use these large base ratcheting jack stands for a very stable base
    Sunex - Corporate Logo
    T#:5229429
    Part#: 910MTAS
    Ships on Dec 8, 2026
    $ 154.99 USD
    Free Shipping
    $ 154.99 USD
    Free Shipping
    Used with a torque wrench to access obstructed fasteners
    Sunex - Corporate Logo
    T#:2528142
    Part#: SX113D
    Ships on Dec 8, 2026
    $ 59.99 USD
    Free Shipping
    $ 59.99 USD
    Free Shipping
    With great comfort and design the air ratchet wrench is the perfect tool

    Sunex - Corporate Logo
    T#:2706156
    Part#: 418MZTD
    Ships on Dec 8, 2026
    $ 10.99 USD
    Free Shipping on orders $49 and up
    Throw this thin wall impact for whatever you need!

    Sunex - Corporate Logo
    T#:2528137
    Part#: 9710MD
    Ships on Dec 8, 2026
    $ 31.99 USD
    Free Shipping on orders $49 and up
    Great for lines hoses with nuts and offset nuts.
    Sunex - Corporate Logo
    T#:2706153
    Part#: 2505WD
    Ships on Dec 8, 2026
    20% off MSRP $ 19.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 15.99 USD
    Free Shipping on orders $49 and up
    20% off MSRP
    $ 19.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 15.99 USD
    Free Shipping on orders $49 and up
    Forged from the finest chrome-molybdenum alloy steel, the best choice for strength

    Sunex - Corporate Logo
    T#:2750699
    Part#: 9914MA
    Ships on Dec 8, 2026
    $ 107.39 USD
    Free Shipping
    $ 107.39 USD
    Free Shipping
    Fully polished drop forged CR-V alloy steel for maximum strength and service life
    Sunex - Corporate Logo
    T#:2528144
    Part#: 9726D
    Ships on Dec 8, 2026
    15% off MSRP $ 68.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 57.80 USD
    Free Shipping on orders $49 and up
    15% off MSRP
    $ 68.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 57.80 USD
    Free Shipping on orders $49 and up
    Keep this great tool set near by and ready to use.

    Sunex - Corporate Logo
    T#:5229434
    Part#: 3930
    Ships on Dec 8, 2026
    $ 83.99 USD
    Free Shipping on orders $49 and up
    An all inclusive brake piston retractor set

    Sunex - Corporate Logo
    T#:1793488
    Part#: 1006C
    Ships on Dec 8, 2026
    $ 186.99 USD
    $ 186.99 USD
    Used in pairs for supporting automotive vehicles after lifting
    Sunex - Corporate Logo
    T#:5269496
    Part#: 9704
    In Stock
    5% off MSRP $ 43.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 41.99 USD
    Free Shipping on orders $49 and up
    5% off MSRP
    $ 43.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 41.99 USD
    Free Shipping on orders $49 and up
    Made of heat treated alloy steel
    Sunex - Corporate Logo
    T#:5269515
    Part#: 3670S
    Ships on Dec 8, 2026
    $ 62.99 USD
    Free Shipping on orders $49 and up
    CR-MO alloy steel for long life


    Sunex - Corporate Logo
    T#:2498418
    Part#: 3911D
    Ships on Dec 8, 2026
    $ 133.99 USD
    Free Shipping
    $ 133.99 USD
    Free Shipping
    This set covers 8 different functions
    Sunex - Corporate Logo
    T#:2706159
    Part#: 426MDD
    Ships on Dec 8, 2026
    $ 15.99 USD
    Free Shipping on orders $49 and up
    Throw this thin wall impact on for whatever you need!
    Sunex - Corporate Logo
    T#:34885399
    Part#: 6809A
    Ships on Dec 8, 2026
    $ 227.99 USD
    $ 227.99 USD