Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:
HARD Motorsport - BMW E36 Coupe RS Rear Seat Delete Kit
Price: $399.00
SKU: E36RSDELETE
Optional Add-ons (Save $50 each):
Quantity:
Adjustable in cart
Payment Options: Starting at $37/month or 0% APR with Affirm (See if you qualify)
BMW E36 Coupe RS Rear Seat Delete Kit
Eliminate the heavy rear seats while maintaining a clean, professional interior. Our RS Rear Seat Delete Kit transforms your classic E36 Coupe into a German RennSport-inspired beauty. Say goodbye to rattling aluminum panels and boxy kits; our molded design delivers a sleek, tailored finish.
Product Details:
Note: Slight material variances may occur due to the thermoforming process. Panels are semi-rough cut and may require additional trimming for optimal fit and clearance.
This Fire Wall Block Off Plate is the perfect solution for sealing off the engine bay from the cab in gutted track cars. It is pre-curved and has a bead roll to help retain its shape and keep out engine pollutants and other dangerous conditions. This plate mounts to factory locations and takes only minutes to install, needing no drilling, tapping, or welding.
Fits both left and right side drive vehicles.
Use of silicone during installation can help create a tighter seal. Also, heat-reflective material can be used to help reduce heatsoak in the cabin.
Fits the following vehicles:
E36 BMW All Sub-models
This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).
Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.
Choose from soft alcantara or perforated air leather with either a silver or black anodized base.
HARD Motorsport Rear "Seat Delete" Bulkhead filler panel is perfect for sealing your cabin from the trunk when gutting your vehicles of heavy rear seats. Fitting most applications, this panel is the closest option to a drop in part you can find. For vehicles with safety cages, only a small bit of modification is necessary for perfect fitment.
Product Features:
Fits the following vehicles:
E36 BMW All coupe sub-models including the M3
HARD Motorsport's E36 Gauge Cluster Delete panel is made of high quality ABS plastic that is light and durable. Perfect for replacing you factory gauge cluster and giving you the look of a factory built race-car. This piece installs directly into your oem cluster location using factory hardware, no extra hardware or brackets are needed.
This fits the following vehicles:
E36 BMW All
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
*Does not include mounting support brackets*
This product offers the following:
Solid core, aluminum skinned, composite material
Easily replaceable
Extremely durable and flex resistant at high speeds
Satin Black top finish and unfinished bottom side
This fits the following vehicles:
E36 BMW All
HARD Motorsport's window deflector pairs are a perfect option to increase the aerodynamic properties of your E46 BMW. Designed to reduced drag and resistance, these deflectors prevent air from flowing into your interior, allowing for faster acceleration times.
Features:
Compatible with HARD Motorsport polycarbonate rear windows.
Fits the following vehicles:
E36 BMW All coupe models
The V2 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style plus an additional 20mm in width, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Allows fitment of up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.
Product fits the following vehicles:
E36 BMW M3 (And all other e36 coupes with M mouldings)
Inspired by the Factory BMW 320si Touring Cars used in WTCC and BTCC, these Kidney Grill Aero Plates block air from entering the engine bay, helping to reduce drag and increase vehicle aerodynamics.
Fits all E36 BMW's with a production date from 09/1996.
BMW E46 "RS" Red Door Pull Strap Conversion Kit transforms the factory door handles of your BMW E46 into high-performance RS-style pull straps, similar to those found on Porsche RS models. This conversion kit offers a blend of functionality and aesthetics while enhancing safety during track events. Key benefits include:
The Brake Cooling Backing Plates from HARD Motorsport features a design that creates a pocket that forces cool air directly into the rotor from the hat so that built up up doesn't have time to lead to premature brake failure and wear. For any sporty or track driven vehicle, this is an absolute must have! It is made from lightweight solid aluminum and is power-coated for extra protection and appearance. They are installed into OEM mounting locations using stock hardware.
For use with the HARD Motorsport Complete Brake Cooling Duct Kit
Fits the following vehicles:
E36 BMW M3 and all submodels with an OEM M3 rotor conversion
HARD Motorsport's Front Splitter is an inexpensive option to a carbon fiber splitter, but with the same benefits. It is constructed with a high quality aluminum skinned composite material that is lightweight but still extremely durable and rigid, resisting flexing at higher speeds. the top side of the splitter has a black satin finish. The bottom side is unfinished but the splitter can be flipped over for custom paint or vinyl wrapping.
Includes mounting support brackets and installation hardware.
This product offers the following:
This fits the following vehicles:
E36 BMW All
These lightweight, powdercoated aluminum panels from HARD Motorsport are exactly what you need to seal off the holes left behind when removing the speaker covers and rear tray from your E36 BMW Coupe. They can be mounted with silicone or any other permanent methods.
Features:
Vehicle Application:
1992-1999 E36 BMW All Coupe Sub-models including M3
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
The V1 fender flares from HARD Motorsport allow you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the E46 330 Fender Style, this full kit adds an aggressive look to your E36 while still keeping a relatively factory appearance. Because of this, all original molding are still able to be used to maintain this look.
The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.
Allows fitment of up to 275/35/18 rubber on 18x9.5 ET35 wheels on both the front and rear of your E36. Other combinations are possible but may require slight adjustment for optimal fitment.
Product fits the following vehicles:
E36 BMW Sedan and "ti" models
