BMW Suspension Parts for BMW 3 Series E36 (1992-1998)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Rear Bumpstop - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:31589440
Part#: 33502290348
Ships in 4 Business Days
Sale - Save 5% $ 25.99

This product was last offered at the strikethrough price on
08-31-2026

$ 24.69 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 25.99

This product was last offered at the strikethrough price on
08-31-2026

$ 24.69 USD
Free Shipping on orders $49 and up
Rein Rear Lower Control Arm - E36, E46
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592413
Part#: 33326770813
In Stock
Sale - Save 5% $ 71.99

This product was last offered at the strikethrough price on
08-31-2026

$ 68.39 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 71.99

This product was last offered at the strikethrough price on
08-31-2026

$ 68.39 USD
Free Shipping on orders $49 and up
Complete including bushing

KMAC - Corporate Logo
T#:582353
Part#: 192026G
In Stock
$ 320.00 USD
Free Shipping
$ 320.00 USD
Free Shipping

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Ships in 9 Business Days
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Rein Control Arm Bracket w/ Bushing - E36, Z3
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:593158
Part#: 31121136531
Ships in 4 Business Days
Sale - Save 5% $ 43.99

This product was last offered at the strikethrough price on
08-31-2026

$ 41.79 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 43.99

This product was last offered at the strikethrough price on
08-31-2026

$ 41.79 USD
Free Shipping on orders $49 and up
Includes pressed in bushings
Rein Sway Bar Bushing - E32, E34, E36
For vehicles with standard suspension For vehicles with standard suspension and production date from 06/1992
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379679
Part#: 33551131155
In Stock at Vendor
Sale - Save 22% $ 4.99

This product was last offered at the strikethrough price on
08-31-2026

$ 3.87 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 4.99

This product was last offered at the strikethrough price on
08-31-2026

$ 3.87 USD
Free Shipping on orders $49 and up
15mm rubber bushing

Rein Rear Bumpstop - E36, E46
For vehicles without sport suspension
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592428
Part#: 33502290318
Ships in 4 Business Days
Sale - Save 5% $ 14.99

This product was last offered at the strikethrough price on
08-31-2026

$ 14.24 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 14.99

This product was last offered at the strikethrough price on
08-31-2026

$ 14.24 USD
Free Shipping on orders $49 and up
Protects damper from premature failure

Rein Control Arm Bracket w/ Bushing - E36, Z3
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:593159
Part#: 31121136532
Ships in 4 Business Days
Sale - Save 5% $ 42.99

This product was last offered at the strikethrough price on
08-31-2026

$ 40.84 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 42.99

This product was last offered at the strikethrough price on
08-31-2026

$ 40.84 USD
Free Shipping on orders $49 and up
Includes pressed in bushings
Sway Bar End Link - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379769
Part#: 31351130075
Ships in 4 Business Days
Sale - Save 5% $ 14.99

This product was last offered at the strikethrough price on
08-31-2026

$ 14.24 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 14.99

This product was last offered at the strikethrough price on
08-31-2026

$ 14.24 USD
Free Shipping on orders $49 and up
Restore handling lost to broken end links
Rein Front Sway Bar Eng Link - BMW E36, Z3
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:375765
Part#: 31351091764
Ships in 4 Business Days
Sale - Save 5% $ 20.11

This product was last offered at the strikethrough price on
08-31-2026

$ 19.10 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 20.11

This product was last offered at the strikethrough price on
08-31-2026

$ 19.10 USD
Free Shipping on orders $49 and up
Includes hardware


OEM Rein Front Sway Bar Bushing - 23mm - E34 E36 Z3
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:375742
Part#: 31351135805
Ships in 2 Business Days
Sale - Save 27% $ 3.95

This product was last offered at the strikethrough price on
05-14-2026

$ 2.90 USD
Free Shipping on orders $49 and up
Sale - Save 27%
$ 3.95

This product was last offered at the strikethrough price on
05-14-2026

$ 2.90 USD
Free Shipping on orders $49 and up
This is an OEM Rein replacement sway bar bushing for a 23mm diameter sway bar. Replace your failed sway bushing to restore optimal handling characteristics.
Rein Front Stabilizer End Link - E36, Z3
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592327
Part#: 31352227203
Back Ordered
Sale - Save 5% $ 23.99

This product was last offered at the strikethrough price on
08-31-2026

$ 22.79 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 23.99

This product was last offered at the strikethrough price on
08-31-2026

$ 22.79 USD
Free Shipping on orders $49 and up
Replace worn links to restore handling
KMAC - Corporate Logo
T#:389652
Part#: 192316-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping

Rear Differential Bushing - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592387
Part#: 33171134872
Back Ordered
Sale - Save 5% $ 18.99

This product was last offered at the strikethrough price on
08-31-2026

$ 18.04 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 18.99

This product was last offered at the strikethrough price on
08-31-2026

$ 18.04 USD
Free Shipping on orders $49 and up

Rein Rear Control Arm Bushing - E36, E46, E83, Z4
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:363435
Part#: 33321092247
Back Ordered
Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
08-31-2026

$ 27.54 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 28.99

This product was last offered at the strikethrough price on
08-31-2026

$ 27.54 USD
Free Shipping on orders $49 and up
Upper control arm to subframe bushing
Rein Trailing Arm Bushing - E36, E46, E83, Z4
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379801
Part#: 33326771828
Back Ordered
Sale - Save 5% $ 21.99

This product was last offered at the strikethrough price on
08-31-2026

$ 20.89 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 21.99

This product was last offered at the strikethrough price on
08-31-2026

$ 20.89 USD
Free Shipping on orders $49 and up
Bushing located in the rear lower position of the rear trailing arm