Select Vehicle
BMW
Mini
Category
-
Engine Software
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
BMW E36 Shark Injector Performance Software is the ultimate upgrade for boosting the power and torque of your BMW. This performance software, meticulously dyno-tuned by BMW expert Jim Conforti, is engineered to enhance the potential of high-octane (91+) pump gas, significantly increasing mid-range torque and high-RPM horsepower. The Shark Injector also features an increased rev limit, fine-tuned fuel and spark maps, and optimized performance, ensuring that your BMW exceeds its factory capabilities. The installation is straightforward, typically taking just an hour, and maintains drivability while improving responsiveness.
Note: The Shark Injector software is specifically designed for NORTH AMERICAN SPEC BMWs and is not compatible with EURO-SPEC models.
You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!
To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.
Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order.
Helpful Links:
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M52/S52 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M52/S52 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The Shark Injector plugs into the diagnostic port under the hood of the E36. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
1996-1999 E36 323/328 (M52 engine) Performance Software Peak Gains
HP Gain Up To:+15 @ 6,400 RPM
Torque Gain Up To: +9 @ 4,500 RPM
New Rev Limit:7,000 RPM
+10 @ 4,000 RPM
E36 M3 dyno chartHP Gain:+12 @ 6,000 RPM
Torque Gain:
New Rev Limit:7,000 RPM
Read what others are saying!
(click to expand)
Anonymous, 323is: "I purchased my first Shark for my 1999 - 323is (e36). I installed it during work today and had a GREAT time driving home on I495. My wife actually had to call me to find out what was taking so long. She didn't know I was having the most fun I've had since I first purchased my BMW! I would definitely recommend this new product to all the 323is owners."
Gary, 328i: "I own a 1997 328i and recently installed the Conforti Shark Injector and Intake Kit, as well as a Borla exhaust and a B & M sport shift kit. I am very impressed with the amount of performance I was able to gain."
Manny, E36 M3: "Just "sharked" my E36 M3. All I can say is WOW. The car has never run so well. The idle and the engine overall is so smoooooth! The throttle is very responsive, power is right there. Very Nice! Never putting it back to stock! Just wanted to say job well done, and thanks."
Josh, E36 M3: "Just got done putting on my Supersprint exhaust, Shark injector and my intake, wow what a difference. Thank you guys for the performance, I will be a lifetime customer."
/>
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). This particular file includes Stage 1 engine tuning (fuel, ignition, timing upgrades) with EWS-delete programming. There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M52/S52 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the S52 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The programming for EWS delete will allow you to use a spare ECU to run the engine. If your original ECU fails, and you find yourself buying a used ECU, you won't have to tow the car to the dealer to have the ECU synced to the car's EWS system. This is also the perfect software solution if you installed an S52 engine in your E36 323/328 - just plug in the M3 ECU and flash with this Shark Injector. This Stage 1 file will bypass the EWS code and give you all of the benefits of our Stage 1 tune.
The Shark Injector plugs into the diagnostic port under the hood of the E36. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
1996-1999 E36 M3 Performance Software Peak Gains
E36 M3 dyno chartHP Gain Up To:+12 @ 6,000 RPM
Torque Gain Up To:+10 @ 4,000 RPM
New Rev Limit:7,000 RPM
Read what others are saying!
(click to expand)
Manny, E36 M3: "Just "sharked" my E36 M3. All I can say is WOW. The car has never run so well. The idle and the engine overall is so smoooooth! The throttle is very responsive, power is right there. Very Nice! Never putting it back to stock! Just wanted to say job well done, and thanks."
Josh, E36 M3: "Just got done putting on my Supersprint exhaust, Shark injector and my intake, wow what a difference. Thank you guys for the performance, I will be a lifetime customer."
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2000 Z3 BMWZ3 M Roadster M Coupe
Stage 4+ Performance Software for E36 M3, MZ3 (M50 Manifold + Cams + Headers Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package: M50 manifold, Schrick camshafts, performance headers, "24lb" injectors, Porsche 809 3.5" HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software -- or a regular Shark Injector -- is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash -- he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end andmid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Performance Headers (TMS Shorty Headers or similar)
M50 manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Stage 3 Performance Software for E36 M3, MZ3 (HFM/Cam Kit) (stock S52 manifold)
Conforti Shark Injector performance software tuned for our Stage 3 OBD2 package: Schrick camshafts, "24lb" injectors, Porsche 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Unleash the full potential of your BMW's power and torque effortlessly with the Shark Injector, your ultimate solution for a performance boost. Expertly dyno-tuned by BMW legend Jim Conforti, this software is meticulously crafted for high-octane (91+) pump gas, prioritizing mid-range torque and high-RPM horsepower. Explore the benefits:
Revitalize your BMW's performance hassle-free with Shark Injector's expertly crafted software.
Elevate your BMW's performance effortlessly with the Shark Injector—the ultimate solution for adding power and torque. Engineered by BMW tuning legend Jim Conforti, this software is optimized for high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. Unleash the potential of your BMW with these features:
Installation is a breeze—connect a battery charger, plug in your Shark Injector, and start the process. This innovative solution replaces stock software, storing original data for future use. When the LED turns from red to green, your BMW is ready to deliver enhanced performance.
Stage 4 Performance Software for E36 M3 (Turner HFM + Cams + Headers Kit)
Conforti Shark Injector performance software tuned for our Stage 4 OBD2 package: Schrick camshafts, performance headers, "24lb" injectors, Porsche 809 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Performance Headers (TMS Shorty Headers or similar)
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
If you're seeking an effortless way to enhance your BMW's power and torque, the Shark Injector is your answer. Meticulously dyno-tuned by BMW tuning legend Jim Conforti, this cutting-edge software is designed to harness the full potential of high-octane (91+) pump gas, resulting in impressive mid-range torque and high-RPM horsepower. Explore the standout features of this remarkable product:
Shark Injector software is ONLY compatible on NORTH AMERICAN SPEC BMWs. It is not designed to, nor will operate properly on EURO-SPEC BMWs
Stage 3+ Performance Software for E36 M3 (M50 Manifold + Cam Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package: M50 manifold, Schrick camshafts, "24lb" injectors, Porsche 3.5" HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software -- or a regular Shark Injector -- is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash -- he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
M50 intake manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Stage 2 Performance Software for E36 M3, MZ3 (Turner-Porsche 3.5" HFM, larger injectors)
Conforti Shark Injector performance software tuned for our Stage 2 OBD2 package: larger fuel injectors, Porsche 3.5" HFM, and intake. This is the correct software to use with the desireable Porsche 803/809 HFM on the OBD2 E36 M3. You should not be running a larger HFM without software and injectors - you're in danger of running too lean! On the dyno we found that the stock fuel injectors were not capable of providing enough fuel to keep up with the increased airflow. This "leaner" fuel mixture was dangerous as it could lead to hotter combustion temps and burning or melting of critical components. With the correct HFM, larger injectors, and this software you will be back to running correct air-fuel ratios.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Stage 3+ Performance Software for E36 328i/is/ic, E39 528i, and Z3 2.8 (M50 Manifold + M3 Cam Kit)
Conforti Shark Injector performance software tuned for the awesome OBD2 package: M50 manifold, M3 S52 camshafts, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software, or a regular Shark Injector, is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash: he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
E36 M3 MZ3 S52 stock camshafts
M50 intake manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW 328i 328ic 328is
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW 2.8