BMW Brakes & Brake Parts for BMW 3 Series E36 (1992-1998)

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner Stainless Steel brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

E46 M3 CSL brakes fit the E36 M3 for a bolt-on size enhancement and more stopping power. The CSL rotors are a full 30mm (1.18") larger than the stock E36 M3 discs. The larger rotor puts out more braking torque and can handle more friction and heat than stock. With the special brackets these larger rotors are able to bolt-on to the E36 M3 hub using your original calipers and lines. Simply bolt them on using the new caliper bracket. The E36 M3 CSL upgrade is a moderate upgrade over stock compared to a StopTech or Brembo Big Brake Kit but has lower upfront cost, lower consumable cost (pads and rotors), and has a wide range of pad choices (any brake pad for an E36 M3 or E46 M3 will work).

We offer these brakes with three rotor choices -

• Stoptech (Centric) CSL/ZCP Cross-Drilled and Floating
• Original M3 CSL/ZCP Cross-Drilled and Floating
• ECS 2-piece Cross Drilled and Slotted Floating (pictured)

With more braking torque, the brake bias is changed. For the street, you will notice more stopping power and more "bite" from the front brakes. You may not notice the front brakes are working harder. If you're using this kit on the track it will be more important to balance the brake bias using different front-rear pad compounds. The front brakes will be doing more work than before to slow the car down and you will need to balance that with a more aggressive pad on the rear. You may notice the front tires locking up sooner, especially in wet conditions. Contact us to discuss track pads for your situation.

Wheel fitment: 18" wheels are strongly recommended for brake clearance although some 17" wheels will work (if they clear a BBK they will work with these)

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front Brake Pads
• Zimmerman Front Rotors
• New Front Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW 318i/ic/is/ti 323is/ic 325i/is/ic 328i/is/ic

When replacing your worn out brakes, the market is flooded with performance options. If your BMW doesn't see track time, it's not very practical. Performance pads and rotors tend to result in a lack of bite at low braking temperatures and cause excessive noise in daily driven vehicles that becomes irritating. BMW brakes from the factory are perfectly suited for trips around town, across the country, and even the occasional spirited driving session, delivering smooth, quiet, and long lasting performance. 

Included in this E36 BMW brake package are all of the OEM equivalent components needed to replace your Front & Rear brakes with comfort, reliability, and optimal lifespan in mind.

Brake components in this kit:

• Textar Front & Rear Brake Pads
• Zimmerman Front & Rear Rotors
• New Front & Rear Wear Sensors
• Brand New Stainless Steel Set Screws
• Syl-Glide Silicone Brake Lubricant 

Fits the following BMWs:
E36 BMW 318i/is/ic 323is 325i/is/ic 328i/is