BMW Cooling System Parts & Accessories for BMW 3 Series E36 (1992-1998)

Our Turner Motorsport's full aluminum expansion tank was designed and engineered in house to help with the weak point in your E36 cooling system. The coolant expansion tank goes through heat cycles over and over again from regular driving, it is important that your expansion tank is doing its job to retain coolant to keep your engine operating temperatures down and keep your engine bay clean. Not only is this a major upgrade but also a great maintenance item to replace. Our expansion tank was designed to fit the OEM hoses for an easy install and comes with all the upgraded items you will need for a clean install,

If your E36 needs a new expansion tank, make sure this is the last expansion tank you ever need to buy. Our coolant expansion tank has a full aluminum construction and wrinkle black powder coat for durability. Expansion tank kit comes with all the accessories you need to replace your expansion tank once, and never have to worry about it again.

Aluminum Coolant Expansion Tank Features:

- Maintains stock coolant capacity and expansion volume

- Designed to maintain OE coolant elevation, preventing air pockets

- Baffled tank ensures that air pockets cannot be introduced during aggressive driving and provides accurate coolant level reading

- Carefully designed bleed passage prevents the introduction of air as the engine cools

- Turner engraved internal fill level

- TIG welded 5052 aluminum construction

- All bungs are machined to fit factory hose ends

Kit contents:

Turner Aluminum Expansion Tank
Coolant level sensor
Expansion tank cap
Heavy duty bleeder screw
Flared coolant pressure release line
Hardware for installation

The 6-speed Getrag 420G transmission, found in the European E36 M3 Evolution and E46 M3, has become an increasingly popular swap amongst E36 owners. Its increased strength, longevity, and overdrive sixth gear make it a great choice for both track cars and daily drivers. Unfortunately, many of the components needed to complete this transplant have become hard to source. Despite increased demand from enthusiasts, BMW has blocked the sale of European E36 M3 parts into North America.

Recognizing this issue, we set out to develop a replacement for the unavailable, 420G-specific transmission crossbrace. Our initial investigation revealed that the factory cast aluminum construction was failure-prone, so durable 5GA 1018 steel was chosen to provide a lasting upgrade. The Turner Motorsport Heavy-Duty Transmission Crossmember is finished in a brilliant silver powder coat to resist corrosion and maximize appearance. Despite being much stronger than the factory crossmember, our design is dimensionally identical, ensuring a perfect fit with your six-speed swap.

Design:

Manufactured from durable 5GA 1018 steel - much stronger than OEM cast aluminum construction Finished in brilliant silver powder coating for maximum corrosion resistance Steel gussets are welded to the main bracket for added strength and power-holding capability Integrated locating dowels prevent bushing rotation and ensure proper alignment under load Dimensionally identical to the OEM part - fully compatible with OE-style bushings and factory hardware Features & Benefits:

Direct replacement for Genuine European BMW part number 23702227892 Finished in brilliant silver powder coating for maximum corrosion resistance Retains factory mounting points and driveline geometry for hassle-free installation Product Development:

Our Heavy Duty Transmission Crossmember was designed, engineered, tested, and quality inspected by our Research and Development team. We strive for nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

• 80 degree Celsius thermostat
• 1 liter of Genuine BMW coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• 16 inch Electric fan 
• Electric fan mounting kit
• Fan controller kit with probe sensor 
• Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

Regular maintenance is key to keeping your BMW running smoothly, and the water pump is a critical component that should be serviced every 60,000 miles. To ensure the overall efficiency of your cooling system, it's also recommended to replace the thermostat at the same time. Turner Motorsport has created a streamlined solution with their Water Pump & Thermostat Replacement Kit, making your cooling system upgrade simple and effective.

Kit Includes:

Meyle Water Pump with Metal Impeller (11510393338) VEMO Thermostat - 88°C (11537511580) Elring Thermostat Housing Flange Gasket (11531721172) Genuine BMW Coolant/Antifreeze (82141467704) Benefits:

Enhanced Cooling Efficiency: Earlier opening thermostat improves temperature control under performance conditions. Reliable Components: Includes high-quality parts from Meyle and VEMO, known for their durability and reliability. Complete Solution: All necessary components for a comprehensive cooling system refresh in one convenient kit. Performance-Driven Design: Ideal for those looking to maintain and enhance the cooling capabilities of their S55 engine.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Thermostat with gasket
• Thermostat mounting hardware
• 1 liter of coolant

This waterpump fits the following BMWs: 
1992-1999 E36 3 series - 323is, 323ic, 325i, 325is, 325ic, 328i, 328ic, M3 3.0 (S50/US), M3 3.2 (S52) 

Looking to improve your cooling system's performance and add some peace of mind at the same time? Look no further. This kit includes everything you need to add performance, durability and longevity to your cooling system without spending a ton of money. Best of all, the upgrade can be performed by a reasonably competent DIY enthusiast in an afternoon. The team at ECS Tuning supplies their excellent silicone radiator hoses, stainless hose clamps, and aluminum coolant bleed screw for increased durability and heat resistance. Meanwhile, a lower pressure expansion tank cap makes for a less costly "weak link" if the system builds too much pressure, potentially saving you from a costly radiator replacement that could leave you stranded. The kit also includes a gallon of Genuine BMW coolant along with 12 ounces of Red Line Water Wetter, which lowers operating temperatures and protects your cooling system from internal corrosion. All you need is this kit, a few hours of free time, and a gallon of distilled water to keep your E36 cool & running at its best!

Kit Contents:

- ECS Tuning Silicone Radiator Hoses

- ECS Tuning Stainless Steel Hose Clamps

- ECS Tuning Heavy Duty Aluminum Coolant Bleeder Screw

- 1.4 Bar Expansion Tank Cap

- Red Line Water Wetter - 12oz

- Genuine BMW Coolant - 1 Gallon

Fits the Following BMWs:

E36 323i 325i 328i M3

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• Aluminum thermostat housing with gaskets
• Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E36 318i/is/ic with the M44 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. 

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the E36 318i/is/ic with the M42 engine. 

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts.