Select Vehicle
BMW
Mini
Category
- Bushings & Mounts
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Swapping in E46 control arms into your E30 or E36 significantly increases negative camber by widening the track width and also gives you more clearance for more steering angle. Condor's CNC machined control arm brackets are made from solid steel and are fitted with a solid hex-shaped bushing. Designed for the street or the track, they hold the control arm steady and eliminate "shimmy" caused by stock bushings. They sharpen steering and improve overall driving feel. Comparable to the NLA Treehouse E36 & E30 Eyeball Arms.
Easiest install of any aftermarket solution
Allow clearance for E30 M50 Conversion exhaust
Street Approved, marginal increase in NVH
Easy Installation, no need for a press
CNC machined steel construction
Solid design without the maintenance of spherical bearings
Heavy-Duty replaceable UHMW insert. Don't be misinformed, UHMW is the best material for these inserts. Delrin is not self-lubricating and will crack and degrade over time.
Powder coated white for corrosion resistance
Improve caster with M3 offset geometry
Keep proper steering geometry under high loads
Made in the U.S.A.
Fitment:
E30 84-91 3 Series
E36 92-98 3 series & Z3
Note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36
Be sure to measure your control arms to determine if you need 21mm or 23mm. Meyle makes a standard e46 control arm and a Heavy Duty control arm. Most HD arms have a hex that is larger in size (23mm). Lifetime Warranty
Swapping in E46 control arms into your E30 or E36 will significantly increase negative camber by widening the track width and will also give you more clearance for more steering angle. Condor's conversion bushings are machined from UHMW due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change). They've designed them offset to re-center the wheel and give your e30/e36 the correct caster. They will include a stainless-steel insert that tightly presses over the hex pattern on the E46 control arms. You do not need to grind down your control arms or make any other modifications to your chassis. Please note that you will need to use E36 outer tie rods and E90 inner tie rods when installing in an E30 or E36.
Fitment:
Fits the following Meyle and Lemforder arms with 21-22MM Hex.
LEMFORDER ZHP - 31122282121 & 31122282122
LEMFORDER - 31126777851 & 31126777852
MEYLE HD - 31126777851 & 31126777852
*Please note that Meyle makes a standard e46 control arm and a Heavy Duty control arm. SOME HD arms have a hex that is larger in size. These HD control arms may need to be shaved 1-2 mm for proper fitment.
Dial in your BMW’s handling like never before with this exclusive Doorbuster offer! Turner Motorsport’s Monoball Rear Trailing Arm Bushings (RTAB) deliver precision alignment, improved rear articulation, and race-inspired performance for the street or track. With a newly available sealed design, these bushings combine ultimate performance with long-lasting durability—making them the perfect upgrade for any BMW enthusiast.
Turner Monoball Rear Trailing Arm Bushings (RTAB)
Turner’s redesigned RTABs now feature a sealed bearing, protecting against contaminants like salt, grit, and road debris while eliminating the need for any lubrication or maintenance—ever. Drawing on over two decades of racetrack expertise, Turner brings precision, durability, and performance straight to your BMW.
Key Benefits:
Eliminates unwanted deflection, maintaining alignment and reducing wheel hop
Allows full trailing arm articulation with low-friction movement
Eliminates binding issues common in rubber or poly bushings
Street-ready: uses OE Lemforder sealed, greased ball joints for long life without increasing NVH
Design Features:
Housing: CNC billet 6061-T6 aluminum, type II anodized for corrosion resistance and strength
Bearing: OE Mercedes/Lemforder 2043520027 sealed ball joint
Bearing Inserts: CNC machined 303 stainless steel
Rebuildable: Rebuild Kit ES2695379 (x2) available
Turner Monoball Rear Upper Control Arm Inner Bushings – Race
For the ultimate in performance, Turner also offers monoball rear upper control arm bushings designed exclusively for track use. These race-grade bushings prevent side loading, allowing full control arm movement and unparalleled precision. While optimized for the track, daring enthusiasts willing to tolerate increased noise, vibration, and harshness may also consider them for street use.
Turner Motorsport continues to deliver high-quality BMW performance parts that combine durability, precision, and race-bred technology—allowing your BMW to perform at its full potential.
Unlock sharper handling and enhanced suspension geometry with this limited-time Doorbuster package. Designed for the E36 M3, this kit combines adjustable front sway bar end links, billet aluminum sway bar brackets, and polyurethane bushings to eliminate unwanted deflection, improve response, and deliver the track-ready precision your BMW deserves.
ADJUSTABLE FRONT SWAY BAR END LINKS — 215–275MM
ECS Tuning’s Adjustable Front Sway Bar End Links allow fine-tuning of your sway bar geometry for optimal balance and performance. With a generous 60mm (2.36") range of adjustability, you can precisely eliminate sway bar preload caused by lowered ride heights or coilover setups—ensuring predictable, neutral handling in all conditions.
Each link features a CNC-machined 6061-T6 billet aluminum body, anodized in red for corrosion resistance and durability. The design incorporates left- and right-hand threaded sections for quick, on-car adjustments without disassembly. Heavy-duty ball joint ends with rubber dust boots and stainless retainers provide long service life, while zinc-plated hardware ensures strength and rust resistance.
Technical Specs:
Adjustment Range: 215mm (8.46") – 275mm (10.82")
Billet aluminum, red anodized center sections
Heavy-duty M10x1.5 ball joints with weather-resistant boots
Zinc-plated hardware & Nyloc locking nuts
Left/right-hand threaded adjustment for easy tuning
Fitment Note: If your E36 M3 has aftermarket struts or coilovers, confirm the distance between your sway bar and the strut body at ride height. Proper fitment requires a length between 215–275mm.
ECS BILLET FRONT SWAY BAR BRACKETS WITH POLYURETHANE BUSHINGS — PAIR
Replace flimsy factory brackets with ECS Tuning’s Billet Front Sway Bar Mounting Kit. Engineered from CNC-machined 6061-T6 billet aluminum, these brackets dramatically reduce deflection, delivering faster reaction time and a more connected front end.
The included red polyurethane bushings feature a greaseable channel for long-lasting, quiet operation. The brackets are Type II black anodized for superior corrosion protection and paired with Class 12.9 zinc-flake coated hardware to ensure secure, worry-free installation.
Performance Benefits:
Rigid billet aluminum brackets minimize sway bar deflection
Polyurethane bushings enhance roll resistance and response
Greaseable design for quieter, longer service life
Improved steering feel and flatter cornering
Installation Notes: Installation is simple and completely reversible—just unbolt your OE brackets, install the ECS poly bushings and billet mounts with supplied hardware, and torque to spec. Fitment is intentionally snug against ECS sway bar stops; press firmly to align and fasten. Use conventional bearing grease during assembly for best results.
Unlock sharper handling and enhanced suspension geometry with this limited-time Doorbuster package. Designed for the E36 M3, this kit combines adjustable front sway bar end links, billet aluminum sway bar brackets, and polyurethane bushings to eliminate unwanted deflection, improve response, and deliver the track-ready precision your BMW deserves.
ADJUSTABLE FRONT SWAY BAR END LINKS — 215–275MM
ECS Tuning’s Adjustable Front Sway Bar End Links allow fine-tuning of your sway bar geometry for optimal balance and performance. With a generous 60mm (2.36") range of adjustability, you can precisely eliminate sway bar preload caused by lowered ride heights or coilover setups—ensuring predictable, neutral handling in all conditions.
Each link features a CNC-machined 6061-T6 billet aluminum body, anodized in red for corrosion resistance and durability. The design incorporates left- and right-hand threaded sections for quick, on-car adjustments without disassembly. Heavy-duty ball joint ends with rubber dust boots and stainless retainers provide long service life, while zinc-plated hardware ensures strength and rust resistance.
Technical Specs:
Adjustment Range: 215mm (8.46") – 275mm (10.82")
Billet aluminum, red anodized center sections
Heavy-duty M10x1.5 ball joints with weather-resistant boots
Zinc-plated hardware & Nyloc locking nuts
Left/right-hand threaded adjustment for easy tuning
Fitment Note: If your E36 M3 has aftermarket struts or coilovers, confirm the distance between your sway bar and the strut body at ride height. Proper fitment requires a length between 215–275mm.
ECS BILLET FRONT SWAY BAR BRACKETS WITH POLYURETHANE BUSHINGS — PAIR
Replace flimsy factory brackets with ECS Tuning’s Billet Front Sway Bar Mounting Kit. Engineered from CNC-machined 6061-T6 billet aluminum, these brackets dramatically reduce deflection, delivering faster reaction time and a more connected front end.
The included red polyurethane bushings feature a greaseable channel for long-lasting, quiet operation. The brackets are Type II black anodized for superior corrosion protection and paired with Class 12.9 zinc-flake coated hardware to ensure secure, worry-free installation.
Performance Benefits:
Rigid billet aluminum brackets minimize sway bar deflection
Polyurethane bushings enhance roll resistance and response
Greaseable design for quieter, longer service life
Improved steering feel and flatter cornering
Installation Notes: Installation is simple and completely reversible—just unbolt your OE brackets, install the ECS poly bushings and billet mounts with supplied hardware, and torque to spec. Fitment is intentionally snug against ECS sway bar stops; press firmly to align and fasten. Use conventional bearing grease during assembly for best results.