Advanced Auto Fabrication for BMW 3 Series E36 (1992-1998)

AAF HVAC Firewall Block Off Plate - E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593107

Part#: 11635

Ships in 1 Business Day

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's E36 Heater Firewall Block Off Plate is a solution for all E36 race cars. Stock heater boxes are often not needed on race cars, and this block off plate is a light weight and stylish replacement. It is recommended to use silicone on the sealing surface to keep all engine fumes outside the cabin. Also uses nuts and bolts to secure this block off plate. Hardware included.

Show More Show Less

AAF Oil Pan Baffle - E36/Z3 6Cyl

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593110

Part#: 11636

Ships in 1 Business Day

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. 10 gated holes control oil slosh in the sump. A must have for all track cars. **Note: Requires Welding to install. Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars.

Show More Show Less

AAF Eye-Bolt Anchor Plate Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7608880

Part#: 116206

Ships in 1 Business Day

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF offers safety harness Seat Belt Anchors (eye-bolt and anchor plate) to help ease the installation of your safety belt. This eyebolt, and anchor plate(washer/nut) kit is made of premium quality steel to fit your car for safety. When it comes to quality hardware for mounting your seat belts, AAF has the racing harness components you need. Never take a chance when it comes to safety!

Show More Show Less

AAF Brake Duct Adapters (Pair) - E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593116

Part#: 11694

Ships in 3 Business Days

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. AAF's brake duct adapters slide directly over the OEM E36 brake duct inlets. They suggest using a strong 2 part bonding adhesive to attach the duct adapters to the OEM brake duct inlet. With the AAF Brake Duct Kit, you do not need any fasteners or glue to hold these in place. This is ideal for maximum airflow, as it does not intrude into the air duct, and will create an air-tight seal around the joint. These are the perfect answer for your brake duct kit.

Show More Show Less

AAF Vented Power Steering Cap Kit - Silver Reservoir

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7624658

Part#: 116253

Ships in 1 Business Day

$ 154.00 USD

Add to Wish List

Qty

$ 154.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Introducing the AAF billet power steering cap kit. This kit comes with everything you need to capture any excess fluid from your power steering system. It features a CNC billet 6061 aluminum cap, machined and built in-house at AAF. This provides a permanent solution that does not require tying anything over your reservoir for race day! This one-of-a-kind cap features a fitting at the top that allows connection to a small billet catch can for clean and safe capture of excess fluid. **Note: This kit was designed to work with solid race mounts. Clearance has not been confirmed with OEM mounts.

Show More Show Less

AAF Brake Backing Plates - E36

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with OEM M3 sized brakes

T#:7608838

Part#: 11696

Ships in 5 Business Days

$ 175.00 USD

Add to Wish List

Qty

$ 175.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. These Backing Plates by Advanced Auto Fabrication feature a large “Pocket” to allow for more efficient air flow into the brake hat. This allows air to travel through the vents in the rotor. AAF's Backing Plate is the full size of the rotor and is a heat shield for the shocks and ball joints. Heating of your shock oil causes oil thinning, which changes the shock dampening characteristics. Protecting your ball joints from heat will improve longevity and prevent premature wear. The backing plates are powder coated black for extra durability and attractive aesthetics. They replace the OEM dust shields, and will need to be removed before installation.

Show More Show Less

AAF Vented Power Steering Cap Kit - Blue Reservoir

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54530866

Part#: 116253-BLU

In Stock

$ 154.00

This product was last offered at the strikethrough price on
06-03-2026

$ 144.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 154.00

This product was last offered at the strikethrough price on
06-03-2026

$ 144.99 USD

Limited Qty Sale

Add to Wish List

Introducing the AAF billet power steering cap kit. This kit comes with everything you need to capture any excess fluid from your power steering system. It features a CNC billet 6061 aluminum cap, machined and built in-house at AAF. This provides a permanent solution that does not require tying anything over your reservoir for race day! This one-of-a-kind cap features a fitting at the top that allows connection to a small billet catch can for clean and safe capture of excess fluid.

Show More Show Less

AAF Race Shifter W/Adjustable Shift Shaft - E36 6-Speed

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 6-speed transmissions

T#:7624621

Part#: 116148-6

Ships in 3 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!

Show More Show Less

AAF Steel Tie Downs(pair)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7624657

Part#: 116127

Ships in 1 Business Day

$ 18.00 USD

Add to Wish List

Qty

$ 18.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Steel car tie down loops are an easy way to add a strong tie down to you car. These tie down loops bolt right to your rear lower shock bolts or your front control arm rear mounts with just a longer bolt. Comes as a pair.

Show More Show Less

AAF Race Shifter w/Adjustable Shift Shaft - E36 5-Speed

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with 5-speed transmissions

T#:7624622

Part#: 116148

Ships in 3 Business Days

$ 1,245.00 USD

Add to Wish List

Qty

$ 1,245.00 USD

Add to Wish List

AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!

Show More Show Less

Project Cars

SELECT YOUR BMW

Advanced Auto Fabrication for BMW 3 Series E36 (1992-1998)

Sub-Categories

AAF HVAC Firewall Block Off Plate - E36

AAF Oil Pan Baffle - E36/Z3 6Cyl

AAF Eye-Bolt Anchor Plate Kit

AAF Brake Duct Adapters (Pair) - E36

AAF Vented Power Steering Cap Kit - Silver Reservoir

AAF Brake Backing Plates - E36

AAF Vented Power Steering Cap Kit - Blue Reservoir

AAF Race Shifter W/Adjustable Shift Shaft - E36 6-Speed

AAF Steel Tie Downs(pair)

AAF Race Shifter w/Adjustable Shift Shaft - E36 5-Speed

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results