BMW Tools & Specialty Equipment for BMW E39 M5 S62 5.0L

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Kit Features:

• 18mm
• 19mm
• 21mm
• 22mm
• 24mm

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

The Pneumatic CV Boot Installer simplifies CV boot installation through air power. Its sturdy metal fingers stretch the boots, enabling effortless slipping over constant velocity joints without the need to remove them from the axle.

This efficient tool reduces the once time-consuming two-hour task to a mere 20-minute job, saving significant labor and effort. Operating it is a breeze?all you need is an air compressor, making it convenient for both professionals and enthusiasts in the automotive industry.

Crucially, it works exclusively with flexible CV boots, and is not compatible with plastic boots. With its user-friendly design, this installer is a game-changer in automotive maintenance, offering a hassle-free solution for CV boot installation.

Plus, our Air Powered CV Boot Installer comes with a LIFETIME REPLACEMENT guarantee, ensuring you never have to worry about spending hours on boot installations again!

The VIM Tools 3/8” Drive Impact Driver Set is a powerful manual tool designed to tackle rusted, corroded, and over-tightened fasteners with ease.

Constructed from durable carbon steel with a satin finish, this impact driver is heavy-weighted to deliver increased torque output with minimal effort. It’s compatible with any 3/8” drive impact socket and 5/16” impact bits, making it versatile for various applications, including brakes, exhaust systems, bed bolts, and lug nuts.

The impact driver comes packed in a convenient EVA foam tray, complete with six bit sets totaling 48 bits, ensuring you have the right tool for the job.

Key Features:

• Heavy-Weighted Design: Increases torque output with less effort.
• Versatile Compatibility: Works with 3/8” drive impact sockets and 5/16” impact bits.
• Durable Construction: Made of carbon steel with a satin finish for long-lasting use.
• Wide Application: Ideal for removing rusted, corroded, and over-tightened fasteners in brakes, exhaust systems, bed bolts, and lug nuts.
• Convenient Packaging: Includes six bit sets (48 bits total) in an EVA foam tray for organized storage.

Includes:

• 3/8" Square Drive Impact Driver
• 5/16" x 3/8" Hex Bit Holder
• 8 Piece 5/16" Shank Impact Hex Bit Set, 1.25" OAL
• 8 Piece 5/16" Shank Impact Metric Hex Bit Set, 1.25" OAL
• 8 Piece 5/16" Shank Impact Triple Square Bit Set
• 8 Piece 5/16" Impact S2 Torx Bit Set, 1.25" L, T25-T55
• 8 Piece 5/16" Impact S2 Torx Plus Bit Set, 1.25" L, IP20-IP55
• 8 Piece 5/16" Impact S2 Bit Set, 1.25" L, P1-P4 Phillips & Flat Head

BMW essentials from drivetrain work to fluid changes.

Features:

• 36mm 12-point deep socket, 1/2" drive - Used on axle nuts and most BMW oil filter housing nuts
• 30mm 12-point deep socket, 1/2" drive - Used on driveshaft and pinion mounting, rear wheel bearing removal and reinstallation on many BMWs
• 27mm 6-point socket, 1/2" drive - Fits N52/54 oil filter housing nuts and other various places on most BMWs
• 14/17mm service wrench - Versatile wrench features an open end and a hex head driver that fit most BMW transmission fill/drain plugs. Perfect for engine and transmission oil drains.
• M18 triple square extended reach socket, 1/2" drive - Used to remove axles and other various driveline components.
• All of the sockets included in this kit are built with extreme durability and versatility in mind, and can be used with breaker bars and impact guns.