Showing 10154 results for ""

Located on the intake side of the cylinder head, this sensor relays the position of the camshaft to the computer in order to determine proper ignition timing. When this sensor fails the engine will generally log a fault code and may place the vehicle into "limp" mode. When this happens it is advised to stop driving the vehicle and address the issue immediately as premature wear or long term damage to the engine is possible.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

OE BMW reference number: 12147539165
 

We also carry a this sensor with the required o ring Here

This part fits the following BMWs:
1998 - 2004 E39 Touring 525i 528i 
1996 - 2004 E39 Sedan 525i 528i 530i  
1999 - 2006 E46  323i 323ci 325i 325ci 325xi 328i 328ci 328xi 330i 330ci 330xi 

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. BMW straight six engines are notorious for leaky valve cover gaskets. Years of exposure to extreme temperature change degrades the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

This valve cover gasket set fits the folowwing BMWs with the M54 engine:

E39 525i 530i For vehicles with production date from 09/2002 
E46 325Ci 325i 325Xi 330i 330Ci 330Xi For vehicles with production date from 09/2002 
E53 X5 For vehicles with production date from 09/2002 
E60 525i 530i 
E83 X3
Z4 2.5i 3.0i

If the throttle body gasket is leaking air, this could cause a vacuum issue that would cause poor engine operation. Whenever you remove your throttle body for any reason, replace the gasket with a new one to ensure a proper seal.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M54 2.5L
N73 6.0L (2 seals needed)

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

Also included is the BMW fan favorite OE ZHP shift knob that will add a sportier look to your shifter.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

The BMW Shifter Carrier Arm Bushings - Round are crucial components designed to enhance the performance and functionality of the shifter assembly in various BMW models. These bushings provide critical support for the shifter carrier arm, improving the overall shifting experience and driving dynamics.

Key Features:

1. High-Quality Material:

   • Crafted from durable materials, these round bushings are engineered to withstand the rigors of daily driving and performance use. Their robust construction ensures long-lasting reliability and performance.

2. Enhanced Shifting Precision:

   • By reducing play and unwanted movement in the shifter mechanism, these bushings allow for more accurate gear engagement. This improvement translates to a more responsive and connected feel when shifting gears.

3. Improved Shift Quality:

   • Replacing worn or degraded bushings with new round bushings can significantly enhance shift quality. Drivers will notice a reduction in vagueness and a more direct response when changing gears, contributing to a more engaging driving experience.

4. Simple Installation:

   • Designed for ease of installation, these bushings can typically be replaced using standard hand tools. While experienced DIYers can handle the job, professional installation is recommended to ensure proper alignment and function.

5. Wide Compatibility:

   • Suitable for a variety of BMW models, these bushings are an excellent upgrade for enthusiasts looking to improve their vehicle's shifter performance and feel.

Benefits of Upgrading or Replacing:

• Direct and Engaging Shifting: New bushings eliminate excess movement in the shifter assembly, providing a firmer and more enjoyable shifting experience.
• Vibration Dampening: Fresh bushings help absorb vibrations, reducing noise from the shifter area and contributing to a quieter cabin environment.
• Extended Component Life: By replacing old, worn bushings, you can prevent additional wear and tear on the shifter assembly, ultimately extending its lifespan.

In summary, the BMW Shifter Carrier Arm Bushings - Round are essential for enhancing the performance and feel of the shifter in various BMW models. By improving shifting precision and overall driving dynamics, these bushings are a valuable addition for any BMW owner looking to elevate their driving experience.

Enhance your BMW's wheel change process with a stud conversion kit. This comprehensive kit includes Conical Seat Lug Nuts (20) and 56mm Wheel Studs (20), providing a permanent solution for faster and easier wheel changes. By installing the supplied studs, you'll have permanent wheel hangers, reducing installation time and hassle significantly.

• Offers permanent wheel hangers for quicker and simpler wheel changes
• Allows accommodation of various spacer widths in one application
• Simplifies wheel installation by using wheel studs as hangers
• Reduces wear on wheel hubs, ensuring less premature wear
• Facilitates quick and easy tire changes due to the retained wheel studs

Note: Thread-locking compound is recommended during installation. Studs should be torqued to 15Nm. These studs may be used with spacers up to 10mm.

Upgrade your BMW's lighting with LED Retrofit Bulbs for brighter, stronger, and cooler illumination

These bulbs offer exceptional brightness and optimized light distribution, providing clearer visibility on the road where it's needed most. With a longer service life compared to halogen bulbs, LED retrofits are an attractive option for all car drivers.

Features:

• Daylight-like 6500K color temperature
• Longer life span
• Produced under HELLA's stringent testing requirements

Specifications:

• Voltage: 12V / 24V
• Power: 20W
• Integrated driver: constant current driver with automatic dimming in case of overheating
• Optimized heat management: LEDs provide an optimal luminous flux
• Built-in Fan: Active ventilation through built-in fan
• Aluminum heat sink: Large radiating area

Please note: This non-DOT approved product is for Off-road/Track use only. Not approved for legal street use.

Elevate your BMW's performance with this advanced two-layer conical performance filter. Crafted with top-tier materials, including 100% polyurethane top and base, it ensures maximum airflow without the need for oil. Enjoy effortless maintenance and convenience, thanks to its washable and reusable design. The tall, evenly spaced pleats offer exceptional dust holding capacity, extending the service cycle between cleanings. Plus, the pliable polyurethane flange, featuring integrated bumps, guarantees a tight, leak-free seal throughout the filter's lifespan.

• Advanced two-layer design for enhanced performance
• Oil-free construction for maximum convenience
• Washable and reusable for prolonged use
• Tall pleats with excellent dust holding capacity
• Pliable polyurethane flange ensures a tight, leak-free seal

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5