Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

• Specially formulated urethane rubber for durability
• Deep bilateral slots accommodate virtually all pinch weld frames
• Versatile positioning: lengthwise or crosswise
• Water, chemical resistant, and 100% weatherproof
• Single-piece construction ensures a superior hold
• Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

Powerflex Front Sway Bar Bushings (22.5 mm) - BMW E38 & E39

Overview: Powerflex front sway bar bushings are designed to enhance handling and stability in your BMW E38 (1994-2002) and E39 (1997-2003) with a 22.5 mm sway bar. Made from high-quality polyurethane, these bushings offer superior durability and performance compared to OEM rubber.

Key Features:

• High-Performance Polyurethane: Provides enhanced strength and resistance to wear.
• Direct Fit Replacement: Easy installation with no modifications required.
• Reduced Body Roll: Improves cornering performance and stability.
• Better Feedback: Enhances steering response for a more connected driving experience.
• Custom Hardness Options: Choose the stiffness that best suits your driving style.

Installation: Simple installation process using basic hand tools, with clear instructions included.

Conclusion

Upgrade your BMW E38 or E39 with Powerflex sway bar bushings for improved handling and a more engaging driving experience.

Clinched Fender Flares

Clinched specializes in crafting fender flares using high-quality, impact-resistant ABS plastic, akin to the material used in OE bumpers. These flares exhibit:

• Sturdiness and lightweight design
• Universality for installation on various vehicle makes and models
• Options for blending with the car's body or showcasing exposed rivets and edges

The installation of Clinched Flares necessitates the drilling and cutting of original fenders. By using a heat gun or hairdryer, the flares can be shaped to fit seamlessly along the factory body lines, highlighting their exceptional pliability compared to fiberglass alternatives.

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. 

Made from 100% prepreg carbon fiber of the highest quality, the workmanship on the housing is second to none. This encapsulates the filter and is mated to an anodized aluminum inlet cowl to ensure a smooth inlet flow path. The filter itself is a deep pleated, high flow double cone configuration which is dry to avoid damaging the MAF sensor. Finally, the assembly is then mated to an aluminum heat shield which effectively shrouds the intake from engine bay heat and captures the ambient air being diverted from the scoop. Also, notice the rubber spacer on the mount of the heat shield - this is for the headlight module to sit on so that it remains at the right height - small details are important! 

100% Prepreg carbon fiber with a CNC machined collar - the air scoop forces ambient air directly into the filter opening. This scoop simply clicks into place in the front right-hand brake duct and effectively saturates the mouth of the intake with cold air. It has been designed to take up half the height of the duct in order to allow airflow to still continue through the duct for the brakes. The scoop is so effective that even after a hard drive, the aluminum cowl at the mouth of the intake will still feel cold to touch! 

Each intake system includes:

• Prepreg Carbon Fiber Venturi Housing
• High Flow Double Cone Air Filter
• Aluminum Cowl for smooth airflow entry
• Prepreg Carbon Fibre Intake Tube with integrated MAF Sensor Mount
• Prepreg carbon Fibre Air Scoop
• Laser Cut Intake Duct
• Laser Cut Stainless Steel Brackets
• High-quality Silicon couplers with BMW specification hose clamps

This part fits the following BMWs:
1998 - 2004 E39 M5

Since 2001, Rennline has been producing high-quality accessories for German cars in their factory in Vermont. The perfect complement to your Rennline aluminum pedal set, these throttle extensions are sold in a set of two to make heel and toe maneuvers easier. You can install both extensions or just the upper or lower portion to customize your car for your driving style. Constructed of anodized, aircraft-grade aluminum with stainless steel hardware, these Rennline throttle extensions are a quick and easy way to improve the look of your BMW's interior when combined with Rennline's aluminum pedal sets. Available in three finishes - red, black, and silver.

This product fits the following BMWs:

E34 

E39

E46

E9x

If you're not sure if your Vanos seals are bad then the only question you need to answer is if you've replaced them. Every unit from the factory came with the same failure prone o-rings and seals, even the re-manufactured units you can still get today. The only real fix is by replacing the seals and o-rings with material that is built to last in the oiled, extreme temperature environment found in these kits. 

A premium product replacement with easy to follow instructions makes rebuilding your Vanos unit a must. Even thought the power loss is barely felt it's the opposite result once you replace the seals, every car that gets rebuilt ends up wowing the customer and all of them saying they didn't realize what they lost. 

There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.

This kit includes all the right seals and tensioner's for a thorough top end rebuild, this is the best way to rebuild the top half of your engine so you don't have to dig in there again and you can just enjoy the drive.

This item fits the following BMWs: 
1999-2001  E38 BMW  740i 740il 
1999-2003  E39 BMW  540i 
1999-2003  E53 BMW  X5 4.4i X5 4.6i

Upgrade your BMW's performance and aesthetics with APEX wheels, renowned for their strength and lightweight construction achieved through the innovative Flow-formed semi-forging process. These wheels are on average 10lbs lighter or more than typical cast wheels, significantly reducing unsprung weight for optimal performance. The meticulously designed spokes and barrel ensure ample space for brake systems, while maintaining a classic motorsports theme that perfectly complements the aggressive style of BMW vehicles. With APEX wheels, you can enhance the appearance and performance of your BMW, exuding confidence on the road or track.

• Stronger and lighter than typical cast wheels
• Average weight reduction of 10lbs or more enhances performance
• Ample space for brake systems with meticulously designed spokes and barrel
• Classic motorsports theme complements aggressive BMW style
• Boosts confidence on the road or track

The H&R Street Performance Coilover kit is designed to offer a slightly softer ride than the standard H&R Coil Over kit offered for the E39 M5. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING

Height adjustment range:
F: -.75-1.8"
R: -.5-1.4"

This item fits the following BMWs:
1999-2003 E39 BMW M5