BMW Suspension Parts for BMW 5 Series E39 (1996-2003)

Rear Guide Rod - Left or Right - E39, E60, E63, E65

10X Entries Into Our F80 M3 Sweepstakes

T#:338099

Part#: 33326777424S1

Ships on Nov 25, 2026

Starting at $ 79.99 USD

Add to Wish List

Starting at $ 79.99 USD

Add to Wish List

This rear guide rod for the E39 chassis helps to control the toe alignment of the car (the horizontal in/out angle of the tire). There is a rubber bushing on the inside and a ball joint on the outside mounting point. When the bushings on the arm wear out they can contribute to a 'wandering' or 'loose' or unstable feeling in the rear. There may also be a clunking noise associated with bumps. This arm is just one part of the rear suspension, and other parts should be checked to confirm which one is causing the issues. For a complete overhaul of the rear suspension, check out our rear control arm package here .

Brand: Febi-Bilstein, Meyle
Price is for each - order 2 to replace both on the car.
This item fits the following BMWs:
12/2001-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
2002-10/2006 E65 BMW 745i 745li 750i 750li 760i 760li

Show More Show Less

E39 525i/528i/530i E39 H&R/Bilstein Sport Suspension Package ...

10X Entries Into Our F80 M3 Sweepstakes

T#:338725

Part#: E39SUSPX6CYL

Back Ordered

$ 1,317.00

This product was last offered at the strikethrough price on
07-01-2026

Starting at $ 1,198.99 USD

Add to Wish List

Starting at $ 1,198.99 USD

Add to Wish List

Looking to emphasize the sporty side of your 5-series? You can reduce bodyroll and improve the handling with this Bilstein-H&R sport package. By lowering the ride height and center of gravity, and stiffening the springs the car will not roll as much in turns. With less weight transfer the tires stay planted to the road and allow you to carry more speed. All of this with hardly any penalty in the ride quality.

H&R Sport springs lower the ride height by up to 1.3" in front and .75" in the rear depending on if the car has the factory sport suspension or not. The spring rate is also stiffer. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:

1 set - H&R Sport Springs (29742-1 or 29742-2)
1 pair - Bilstein Front Sport struts (VE3-B407 / 35-114079)
1 pair - Bilstein Rear Sport Shocks (BE5-2829 / 24-028295)

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i

Show More Show Less

Turner Front Suspension Refresh Kit - Level 2 - E39 525i 528i 530i ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582858

Part#: T31129068753KT

Ships on Feb 23, 2027

Sale - Save 9% $ 1,044.99

This product was last offered at the strikethrough price on
06-30-2026

$ 955.31 USD

Add to Wish List

Qty

Sale - Save 9%

$ 1,044.99

This product was last offered at the strikethrough price on
06-30-2026

$ 955.31 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Front Strut Mounts
Control Arms
Outer Tie Rods
Sway Bar End Links

Show More Show Less

Turner Front Suspension Refresh Kit - Level 1 - E39 540i M5

10X Entries Into Our F80 M3 Sweepstakes

T#:582863

Part#: T31121092609KT2

Ships in 1 Business Day

$ 565.99

This product was last offered at the strikethrough price on
06-08-2026

$ 523.99 USD

Add to Wish List

Qty

$ 523.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms - Curved & Straight
All New Hardware

Show More Show Less

Turner Front Suspension Refresh Kit - Level 2 - E39 540i M5 With Mono...

10X Entries Into Our F80 M3 Sweepstakes

T#:5802187

Part#: T31121092609BKT

Back Ordered

Sale - Save 3% $ 1,171.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,140.24 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,171.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,140.24 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension. This Level 2 kit replaces: Control Arms Front Thrust Arms with mono-ball bushings installed Bushings Hardware Outer Tie Rods Stabilizer End Links

Show More Show Less

Turner Front Suspension Refresh Kit - Level 2 - E39 540i M5

10X Entries Into Our F80 M3 Sweepstakes

T#:582851

Part#: T31121092609KT

Back Ordered

Sale - Save 6% $ 719.99

This product was last offered at the strikethrough price on
06-08-2026

$ 677.54 USD

Add to Wish List

Qty

Sale - Save 6%

$ 719.99

This product was last offered at the strikethrough price on
06-08-2026

$ 677.54 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise free suspension.

This Level 2 kit replaces:

Control Arms
Bushings
Hardware
Outer Tie Rods
Stabilizer End Links

Show More Show Less

Poly Transmission Mount Set

T#:597363

Part#: TRANSIX_E39P

Ships in 2 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

The 70A poly mounts are the solution if you are trying to minimize vibration and NVH. They are currently the softest polyurethane mounts on the market. We suggest these for all street cars. If you are building a track car, check out the solid UHMW transmission mounts from Condor Speed Shop.

Show More Show Less

E39 540i H&R/Bilstein Sport Suspension Package

10X Entries Into Our F80 M3 Sweepstakes

T#:338724

Part#: E39SUSPX540

Ships in 3 Business Days

$ 1,417.00

This product was last offered at the strikethrough price on
07-01-2026

Starting at $ 1,343.99 USD

Add to Wish List

Starting at $ 1,343.99 USD

Add to Wish List

The first step in reducing bodyroll and making this car faster through turns is to replace the shocks and springs. The lower, stiffer H&R Sport springs for the 535i will lower the ride height and manage weight transfer better than the stock suspension. We package these H&R Springs with a set of Bilstein Sport shocks for a complete upgrade in a discounted package.

H&R Sport springs lower the ride height up to 1.3" (less on cars with factory sport suspension) and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:

1 set - H&R Sport Springs (29764 or 50464)
1 pair - Bilstein Front Sport struts (VE3-B409 / 35-114093)
1 pair - Bilstein Rear Sport Shocks (BE5-2829 / 24-028295)

Ride Height Lowering -

540i standard	Front -1.3" / Rear -0.75"
540i sport	Front -.75" / Rear -0.6"

This item fits the following BMWs:
1997-2003 E39 BMW 540i Sedan

Show More Show Less

Shocks and spring Installation Kit - E39 540i

10X Entries Into Our F80 M3 Sweepstakes

T#:553681

Part#: 31311139453KT2

In Stock

Sale - Save 8% $ 435.49

This product was last offered at the strikethrough price on
04-30-2026

$ 402.42 USD

Add to Wish List

Qty

Sale - Save 8%

$ 435.49

This product was last offered at the strikethrough price on
04-30-2026

$ 402.42 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Fits the following BMW's

E39 540i

Show More Show Less

E39 525i/528i/530i H&R/Sachs Sport Suspension Package

10X Entries Into Our F80 M3 Sweepstakes

T#:24987

Part#: TMS24987

Ships in 4 Business Days

$ 1,035.84

This product was last offered at the strikethrough price on
07-01-2026

$ 976.25 USD

Add to Wish List

Qty

$ 976.25 USD

Add to Wish List

This E39 sport suspension uses the H&R Sport lowering springs with the factory OEM Sachs sport suspension shocks to deliver better handling, lower stance, and near-stock levels of ride comfort. Where a Bilstein Sport is a true performance shock, the factory Sachs sport shocks are milder and easier on rough pavement. For a lowered height and prime ride comfort choose this H&R/Sachs kit. For the ultimate performance shock/spring package, choose the H&R/Bilstein kit.

H&R Sport springs lower the ride height by up to 1.3" in front and .75" in the rear depending on if the car has the factory sport suspension or not. The spring rate is also stiffer. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

Because this package uses the stock OEM sport shocks this can be a great upgrade for a non-sport car or a direct refreshening for a car with sport package. These are made by Sachs - one of BMW's suppliers for 50 years. For this package we also include front and rear bump stops (shorter and stiffer than non-sport) and front dust boots (rear boots can be re-used).

Parts list:

1 set - H&R Sport Springs (29742-2)
1 pair - Sachs front strut assembly (31311096857)
1 pair - front bump stops (31331138814)
1 pair - front dust boots (31331091868)
1 pair - Sachs rear shock assembly (33521091922)
1 pair - rear bump stops (33532229697)

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i

Show More Show Less

Turner Front Suspension Refresh Kit - Level 1 - E39 525/528/530i ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582910

Part#: T31129068753KT1

Ships on Sep 16, 2026

$ 444.02 USD

Add to Wish List

Qty

$ 444.02 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms
Control Arm Bushings

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i Touring (up t...

10X Entries Into Our F80 M3 Sweepstakes

T#:583050

Part#: T33326767748KT4

Back Ordered

Sale - Save 3% $ 610.99

This product was last offered at the strikethrough price on
04-23-2026

$ 594.52 USD

Add to Wish List

Qty

Sale - Save 3%

$ 610.99

This product was last offered at the strikethrough price on
04-23-2026

$ 594.52 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Shock Mounts
Ball Joints
Hardware

Show More Show Less

5-series Strut/Shock Mount Kit - E39 540i/M5 with Performance Shocks/...

10X Entries Into Our F80 M3 Sweepstakes

T#:182513

Part#: TMS182513

Back Ordered

Sale - Save 6% $ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 718.48 USD

Add to Wish List

Qty

Sale - Save 6%

$ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 718.48 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 540 M5i
with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (w/o EDC ...

10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC (12/2001 +)

T#:583049

Part#: T33326767748KT3

Ships on Sep 16, 2026

Sale - Save 2% $ 702.18

This product was last offered at the strikethrough price on
07-09-2026

$ 685.95 USD

Add to Wish List

Qty

Sale - Save 2%

$ 702.18

This product was last offered at the strikethrough price on
07-09-2026

$ 685.95 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Upper Control Arm
Rear Ball Joints
Shock Mounts
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (Sedan w/...

10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC (Up to 12/2001)

T#:583019

Part#: T33326767748KT

Ships in 1 Business Day

Sale - Save 3% $ 671.99

This product was last offered at the strikethrough price on
04-23-2026

$ 654.91 USD

Add to Wish List

Qty

Sale - Save 3%

$ 671.99

This product was last offered at the strikethrough price on
04-23-2026

$ 654.91 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Control Arm Bushings
Rear Ball Joints
Rear Strut Mount
New Hardware

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:16175687

Part#: 31331091708-KT

Ships in 3 Business Days

Sale - Save 1% $ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 578.28 USD

Add to Wish List

Qty

Sale - Save 1%

$ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 578.28 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

5-series Strut/Shock Mount Kit - E39 525i/528i/530i with Factory Spor...

10X Entries Into Our F80 M3 Sweepstakes

T#:182511

Part#: TMS182511

Back Ordered

$ 518.34

This product was last offered at the strikethrough price on
08-07-2026

$ 486.50 USD

Add to Wish List

Qty

$ 486.50 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

front bump stop

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i
with factory sport suspension

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 2 - E39 540i Sedan (up to ...

10X Entries Into Our F80 M3 Sweepstakes

T#:583079

Part#: T33522229854KT

Back Ordered

Sale - Save 3% $ 968.99

This product was last offered at the strikethrough price on
08-10-2026

$ 936.38 USD

Add to Wish List

Qty

Sale - Save 3%

$ 968.99

This product was last offered at the strikethrough price on
08-10-2026

$ 936.38 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less

Lemforder Front Curved Control Arm - Left And Right

10X Entries Into Our F80 M3 Sweepstakes

T#:56110328

Part#: 31121092609/1KT2

In Stock

$ 367.99 USD

Add to Wish List

Qty

$ 367.99 USD

Add to Wish List

This replacement kit includes both left and right front curved control arms manufactured by Lemförder, the exact supplier BMW uses on the assembly line.

Dinan/Bilstein Sport Cup Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:56291014

Part#: E39M5-DINBILKT2

Ships in 7 Business Days

$ 1,277.95 USD

Add to Wish List

Qty

$ 1,277.95 USD

Add to Wish List

While Dinan opts for custom valved Konis in their S1 package, some prefer pairing Dinan’s lowering springs with Bilstein B8 Performance Plus dampers. You get superior gas pressure handling, monolithic Bilstein build quality, and incredible street compliance all while saving over $800 compared to the full Koni equipped Dinan kit.

Show More Show Less

Front Suspension Refresh Kit - Level 2

10X Entries Into Our F80 M3 Sweepstakes

T#:15710798

Part#: 32211091723-KT

Back Ordered

Sale - Save 7% $ 642.99

This product was last offered at the strikethrough price on
03-09-2026

$ 599.40 USD

Add to Wish List

Qty

Sale - Save 7%

$ 642.99

This product was last offered at the strikethrough price on
03-09-2026

$ 599.40 USD

Add to Wish List

Symptoms include a loose and imprecise feel to the steering, as well as excessive shaking and vibration through the steering that increases with speed and braking. Individuals may also experience squeaking, whining or grinding from the front when turning at slow speeds. Other symptoms include a knocking or "clunking" in the front over rough road related to the sway bar bushings and upper strut mounts. With the proper tools, replacement of these components will take approximately 1 day.

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:638359

Part#: 31311139453KT3

In Stock

Sale - Save 8% $ 426.99

This product was last offered at the strikethrough price on
04-30-2026

$ 392.86 USD

Add to Wish List

Qty

Sale - Save 8%

$ 426.99

This product was last offered at the strikethrough price on
04-30-2026

$ 392.86 USD

Add to Wish List

This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle.

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i Sedan (w/ EDC...

10X Entries Into Our F80 M3 Sweepstakes

T#:583046

Part#: T33326768791KT

Ships in 9 Business Days

$ 724.99

This product was last offered at the strikethrough price on
07-08-2026

$ 708.99 USD

Add to Wish List

Qty

$ 708.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Ball Joints
Rear Shock Mounts
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i Sedan (w/ EDC...

10X Entries Into Our F80 M3 Sweepstakes

T#:583047

Part#: T33326768791KT1

Ships in 9 Business Days

$ 885.99

This product was last offered at the strikethrough price on
08-11-2026

$ 852.99 USD

Add to Wish List

Qty

$ 852.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Upper Control Arms
Ball Joints
Shock Mounts
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 2 - E39 540i Touring (up t...

10X Entries Into Our F80 M3 Sweepstakes

T#:583074

Part#: T33521093416KT

Back Ordered

Sale - Save 6% $ 978.99

This product was last offered at the strikethrough price on
05-03-2026

$ 920.14 USD

Add to Wish List

Qty

Sale - Save 6%

$ 978.99

This product was last offered at the strikethrough price on
05-03-2026

$ 920.14 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Rear Control Arms & Bushings
Subframe Bushings
Shock Mounts
Sway Bar End Links
Hardware

Show More Show Less

Performance Suspension Cup Kit - Sport - E39

For Sedan Models Without Sport Suspension

10X Entries Into Our F80 M3 Sweepstakes

T#:56363342

Part#: 35-114079KT2

Back Ordered

$ 1,198.99 USD

Add to Wish List

Qty

$ 1,198.99 USD

Add to Wish List

This kit matches progressive H&R Sport Springs with high pressure Bilstein B8 Performance Plus Gas Dampers. Because the B8 features a internally shortened piston rod, it pre loads the H&R spring correctly keeping the damper in its intended stroke range

Show More Show Less

5-series Strut/Shock Mount Kit - E39 525i/528i/530i

10X Entries Into Our F80 M3 Sweepstakes

T#:182510

Part#: TMS182510

Back Ordered

$ 491.44

This product was last offered at the strikethrough price on
08-07-2026

$ 459.60 USD

Add to Wish List

Qty

$ 459.60 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i
with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc

Show More Show Less

Dust Sealing Gasket - Priced Each

T#:7828843

Part#: 31331110196

Back Ordered

$ 2.29 USD

Add to Wish List

Qty

$ 2.29 USD

Add to Wish List

Used to keep the elements off of strut shaft. Seals between strut mount and washer on spring perch.

5-series Strut/Shock Mount Kit - E39 540i with Factory Sport Suspensi...

10X Entries Into Our F80 M3 Sweepstakes

T#:182514

Part#: TMS182514

Back Ordered

Sale - Save 4% $ 873.02

This product was last offered at the strikethrough price on
06-26-2026

$ 835.52 USD

Add to Wish List

Qty

Sale - Save 4%

$ 873.02

This product was last offered at the strikethrough price on
06-26-2026

$ 835.52 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. This package includes all of the original parts used in the E39 factory sport suspension. If you're overhauling your E39 suspension with the factory sport shocks and springs this is the mount package you need (see our other listings if you're using performance shocks such as Bilstein). Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

front bump stop

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 540i
with factory sport suspension

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 2 - E39 540i Sedan (12/200...

10X Entries Into Our F80 M3 Sweepstakes

T#:583096

Part#: T33522229854KT1

Back Ordered

Sale - Save 3% $ 1,051.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,019.80 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,051.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,019.80 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i Touring (12/2...

10X Entries Into Our F80 M3 Sweepstakes

T#:583040

Part#: T33326767748KT2

Back Ordered

$ 921.99

This product was last offered at the strikethrough price on
08-11-2026

$ 888.99 USD

Add to Wish List

Qty

$ 888.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Shock Mounts
Ball Joints
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 2 - E39 540i Sedan (up to ...

10X Entries Into Our F80 M3 Sweepstakes

T#:583089

Part#: T33521091711KT1

Back Ordered

$ 1,031.99

This product was last offered at the strikethrough price on
08-10-2026

$ 998.99 USD

Add to Wish List

Qty

$ 998.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i (12/2001+ w/o...

10X Entries Into Our F80 M3 Sweepstakes

T#:583038

Part#: T33326767748KT1

Ships in 1 Business Day

Sale - Save 4% $ 827.99

This product was last offered at the strikethrough price on
08-11-2026

$ 794.59 USD

Add to Wish List

Qty

Sale - Save 4%

$ 827.99

This product was last offered at the strikethrough price on
08-11-2026

$ 794.59 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Ball Joints
Rear Shock Mounts
New Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 2 - E39 540i Sedan (12/200...

10X Entries Into Our F80 M3 Sweepstakes

T#:583088

Part#: T33521091711KT

Back Ordered

Sale - Save 3% $ 1,083.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,051.75 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,083.99

This product was last offered at the strikethrough price on
08-10-2026

$ 1,051.75 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 2 - E39 540i Touring (12/2...

10X Entries Into Our F80 M3 Sweepstakes

T#:583097

Part#: T33521093416KT1

Back Ordered

Sale - Save 6% $ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,003.56 USD

Add to Wish List

Qty

Sale - Save 6%

$ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,003.56 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 2 kit replaces:

Subframe Bushings
Shock Mounts
Diff Bushings
Control Arms & Bushings
Sway Bar End Links
Hardware

Show More Show Less

5-series Strut/Shock Mount Kit - E39 525i/528i/530i with Performance ...

10X Entries Into Our F80 M3 Sweepstakes

T#:338707

Part#: TMS182510

Back Ordered

$ 491.99

This product was last offered at the strikethrough price on
08-07-2026

Starting at $ 459.60 USD

Add to Wish List

Starting at $ 459.60 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i
with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes

T#:580366

Part#: B8800042

Ships on Feb 1, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

BMW Bav Auto Rear Ball Joint Press

10X Entries Into Our F80 M3 Sweepstakes

T#:580356

Part#: B8800028

In Stock

Sale - Save 3% $ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Qty

Sale - Save 3%

$ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Allows for removal / replacement of lower rear ball joint, enabling you to get this job done at home, saving you time and money on labor.

Bav Auto Upper Spring Compressor Jaw - E39/E46

10X Entries Into Our F80 M3 Sweepstakes

T#:580380

Part#: B8800062

In Stock

Sale - Save 12% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.22 USD

Add to Wish List

Qty

Sale - Save 12%

$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.22 USD

Add to Wish List

This upper spring compressor jaw is specifically for E39 and E46 springs, for use with Bav Auto spring compressors.

Coil Spring Compressor

T#:1809126

Part#: W80554

Ships in 2 Business Days

$ 64.25 USD

Add to Wish List

Qty

$ 64.25 USD

Add to Wish List

Safely and easily compresses coil springs accessible from the center of the coil.

Bav Auto 9-Way Slide Hammer Puller Set

10X Entries Into Our F80 M3 Sweepstakes

T#:580405

Part#: B8800095

Ships on Sep 29, 2026

Sale - Save 5% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

A complete slide hammer kit for your next suspension job.

Bav Auto Rear Ball Joint Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580371

Part#: B8800049

Ships on Oct 19, 2026

Sale - Save 5% $ 81.99

This product was last offered at the strikethrough price on
06-10-2026

$ 77.89 USD

Add to Wish List

Qty

Sale - Save 5%

$ 81.99

This product was last offered at the strikethrough price on
06-10-2026

$ 77.89 USD

Add to Wish List

This ball joint press is designed make removal of your old ball joints as painless as possible. Adapts the size of the balljoint and forces it out when using a ratchet.

Bav Auto 23mm Tie Rod Puller

10X Entries Into Our F80 M3 Sweepstakes

T#:580451

Part#: B8800146

In Stock

Sale - Save 40% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD

Add to Wish List

Qty

Sale - Save 40%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD

Add to Wish List

Will not tear tie rod boots, which can lead to premature failure of the tie rod assembly.

Control Arm Bushing Remover & Installer - Bavarian Autosport ...

10X Entries Into Our F80 M3 Sweepstakes
Designed for use with 65mm bushings

T#:580391

Part#: B8800078

Ships on Oct 19, 2026

Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Don't struggle with hammers and improper techniques, drive your bushings out easily with this control arm bushing remover and installer.

Bav Auto Tie-rod and Upper/Lower Control Arm Ball Joint Puller - E39 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580406

Part#: B8800096

Special Order: No Guaranteed ETA

Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.99 USD

Add to Wish List

This puller is perfect for removing all tie-rod ends and ball joints on the front suspension of all E39 5 Series cars 1997-2003.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less