BMW Suspension Parts for BMW 5 Series E39 (1996-2003)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Bilstein PSS9 Coil-Over Suspension - E39 540i, M5
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344023
Part#: 48-104555
In Stock
$ 2,199.00 USD
Free Shipping
$ 2,199.00 USD
Free Shipping
The B16 PSS9 coil-overs offer a stiffer spring rate than stock and a lower ride height for less body roll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil-over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!
Show More Show Less
Bilstein B14 PSS Coil-Over Suspension - E39 540i M5 - (NO LONGER AVAI...
For sedan models only '00-'03
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:341218
Part#: 47-111264
Ships in 2 Business Days
$ 1,289.00 USD
$ 1,289.00 USD
The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
Show More Show Less
E39 540i/M5 Bilstein PSS Coil-Over Suspension
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:338924
Part#: HE5-B126-H3
Ships in 2 Business Days
Starting at $ 1,289.00 USD
Free Shipping
Starting at $ 1,289.00 USD
Free Shipping
Bilstein's PSS coil over system for the E39 540/M5 combines the best features of the adjustable PSS9 but with fixed dampening rates and a lower price. The PSS kit features height-adjustable springs paired with performance-tuned monotube shock absorbers. It's better than the standard sport shock/spring package thanks to its adjustable ride height and matched shock and spring rates. With a lower ride height and stiffer springs you get less bodyroll and better handling. These are the most user-friendly coil over kits on the market - no special mounts required (works with stock 540/M5 mounts) and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

PSS fixed monotube shocks are matched to the progressive-rate springs and tuned for performance. The PSS does not have the adjustable shock settings like the PSS9. Instead the damping is set at a performance level. Bilstein features a monotube shock design in this kit - one large shock piston instead of two smaller pistons. The larger piston is better at dissipating heat and controlling small shock movements. The rest of the shock is identical to the more expensive PSS9 - zinc coated shock bodies, aluminum spring seats and lock collars, fine rounded threads for precise height adjustments, and tuned progressive-rate springs.

The PSS is height adjustable! Ride height adjustments are done from perches on the bottom of each spring. You can set the ride height between 1.0 to 2.0 inches lower than stock ride height. On the E39 we recommend a front to rear rake of .75" (higher rear). Bilstein uses progressive-rate springs to keep the ride smooth yet sporty. Overall, the PSS springs are stiffer than other coil over kits and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn. Rear shocks are also coil over, just like the factory shocks. The struts are zinc coated for excellent wear and corrosion resistance.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock mounts. On the front, Bilstein has an ingenious upper spring perch that allows you to retain the stock spring radial bearing. We recommend getting new front upper bearings. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as the factory strut, except you use the Bilstein upper spring perch in place of the stock perch. A OEM mount kit or adjustable camber plates are also available. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Assembly Photos
OEM strut mountKMAC Camber/Caster Plates
Note: photos show mounts installed. This is for reference only. Mounts are sold separately.


This Bilstein PSS9 coilover kit fits the following BMWs:
1997-2003 E39 BMW 540i M5
Show More Show Less

Bilstein B14 PSS Coil-Over Suspension - E39 528i 525i 530i
For vehicles without EDC. Average lowering of 1.4-2.0"F 0.8-2.0"R For sedan models without EDC. Average lowering of 1.4-2.0"F 0.8-2.0"R
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344121
Part#: 47-100763
In Stock
$ 1,289.00 USD
Free Shipping
$ 1,289.00 USD
Free Shipping

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

  • Threaded body adjustable range of 20 mm
  • Lowering of approx. 30-50 mm at front and rear
  • Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
  • Aluminum Spring plates and lock nuts
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance
  • Round threads for easy adjustment
  • Quality sport springs made from highly durable material
  • Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

Fits these vehicles:
1997-2003 E39 BMW 528i 525i 530i

Show More Show Less

Bilstein - Corporate Logo
T#:344120
Part#: 46-180926
Special Order: No Guaranteed ETA
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Sportline kit uses an Eibach Sportline spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach Sportline springs are more aggressive than Pro-Kit springs, which tend to be softer overall than most other aftermarket springs, but still ensures ride quality stays close to stock comfort while still giving you a much more aggressive lowered stance and significantly improved handling. 

Bilstein B12 Features: 

  • Quick response and precise handling
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 30 to 60mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i

Show More Show Less
Bilstein B12 Pro-Kit Suspension System - 1999-2003 E39 528i 525i ...
For Touring models only without rear air suspension
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:346249
Part#: 46-180872
Special Order: No Guaranteed ETA
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1999-2003 E39 BMW 528i 525i

Show More Show Less

Bilstein B12 Pro-Kit Suspension System - 1999-2003 E39 BMW 528i 525i ...
For Touring models only with rear air suspension
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:346250
Part#: 46-180896
Special Order: No Guaranteed ETA
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1999-2003 E39 BMW 528i 525i

Show More Show Less
Bilstein B12 Pro-Kit Suspension System - E39 BMW 528i 530i 525i ...
For vehicles without EDC. Average lowering of 1.2"F 0.8-1.0"R For sedan models without EDC. Average lowering of 1.2"F 0.8-1.0"R
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344119
Part#: 46-180841
Ships in 1 Business Day
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1997-2003 E39 BMW 528i 525i 530i

Show More Show Less

Genuine BMW - Corporate Logo
T#:118
Part#: 31331090612
In Stock
3% off MSRP $ 34.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.85 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 34.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 33.85 USD
Free Shipping on orders $49 and up
If you are removing or changing the front struts or springs or replacing the upper strut mount, NOW is the perfect time to replace this upper spring perch. BMW calls it a "upper spring pocket with axial cage bearing". It's really the upper spring plate with the radial bearing set sandwiched between two plastic collars. The bearing is there to allow the spring to rotate a little before going into a bind. If there are popping noises coming from the front strut it's probably because this bearing set is worn or missing. The bearing insert is a common wear item becoming noisy, gritty, or will just fail completely. You won't feel that they're bad from driving the car but you may hear clunking or popping sounds from the front struts. You can replace the rubber mounts on the car but don't leave this part out! It may be just as worn and you won't want to put them back in the car. These are sold individually, so be sure to get two for your car.

The radial bearing set is used in some of our camber plate designs. It's compact, light weight, easy to replace, and inexpensive. It's an excellent alternative to pricey and obscure ball bearing sets found in other camber plates.

Upper Bearing/Spring Perch Applications:
1994-2001 E38 740i, 740iL, 750iL
1997-2003 E39 528i, 530i with EDC - electronic damping control - suspension only
1997-2003 E39 540i, M5
2001-2006 E46 M3
2000-2003 E52 Z8 Roadster, Alpina Roadster
1999-2006 E53 X5 , including 3.0, 4.4i, 4.6is
2006-2010 E60 M5
2006-2010 E63, E64 M6 coupe, cabrio
2002-2008 E65, E66 745i, 745Li, 750i, 750Li, 760Li
2006-2008 E85, E86 Z4 M Roadster, M Coupe
Show More Show Less

Bilstein Front Strut Mount - E39 E46 E60 E61 F07 F10
For vehicles with a production date from 09/1997+
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344302
Part#: 12-248940
In Stock
$ 58.00 USD
Free Shipping
$ 58.00 USD
Free Shipping
Complete front strut mount with bearing and retaining hardware
Bilstein Coil Over Spanner Wrench Set (Notch Style)
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:1702
Part#: 19101X
In Stock
$ 22.03 USD
Free Shipping on orders $49 and up
Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
Show More Show Less
Genuine BMW - Corporate Logo
T#:5343
Part#: 31331091233
Ships in 1 day
Sale - Save 40% $ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.12 USD
Free Shipping on orders $49 and up
Sale - Save 40%
$ 74.99

This product was last offered at the strikethrough price on
06-26-2026

$ 45.12 USD
Free Shipping on orders $49 and up
This is the front upper spring pad. It is a good idea to replace spring pads while replacing shocks or springs. Sold Individually.

This item fits the following BMWs:
1999-2005 E46 BMW M3 M3 convertible
1997-2003 E39 BMW 528i 530i 540i M5
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is
2006-2008 Z4 BMW Z4 M Roadster M Coupe
Show More Show Less


Genuine BMW - Corporate Logo
T#:348199
Part#: 33506779734KT
In Stock
$ 23.99

This product was last offered at the strikethrough price on
08-25-2026

$ 22.99 USD
Free Shipping
$ 22.99 USD
Free Shipping
The aluminum sway bar brackets on the rear of E39 models have a tendancy to snap. It's not a widespread problem but we have seen it a few times, on stock and upgraded sway bars. The stock bracket is soft aluminum and as it flexes it can snap. These upgraded bushing brackets are from the E38 7-series (and others) and are much stronger - and cheaper! - than E39 brackets. They are a direct replacement with the original hardware, however, upgraded urethane bushings may need some material trimmed away to fit better. Price is for the pair of steel brackets.
Show More Show Less
Genuine BMW - Corporate Logo
T#:60002
Part#: 33311093936
Ships in 2 Business Days
5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD
Free Shipping on orders $49 and up


Genuine BMW Stopper
This item fits the following BMW Chassis:
E39 M5,E39

Genuine BMW - Corporate Logo
T#:21791
Part#: 31321139423
In Stock
$ 31.50 USD
Free Shipping on orders $49 and up
Genuine BMW SUPPORT

Genuine BMW - Corporate Logo
T#:13517
Part#: 33532229913
Ships in 2 Business Days
$ 33.19 USD
Free Shipping on orders $49 and up
GENUINE BMW SPRING PAD LOWER:339999

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Bilstein B8 Performance Plus FRONT Strut - E39 525i,528i,530i 1997-20...
Vehicles with production date up to 10/1999 will need spring pads 31331096664
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:1962
Part#: VE3-B407-H1
Ships in 1 Business Day
$ 299.00 USD
Free Shipping
$ 299.00 USD
Free Shipping
Position: Front, Left or Right
Setting: Performance Plus for lowered suspensions

Front Bilstein B8 Performance Plus shock. Performance Plus shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Performance Plus shocks work great with lowering springs such as H&R or Eibach. Includes top nut. Price is per shock.

This Bilstein Performance Plus Front shock fits the following BMWs:
1997-2003 E39 525i, 528i, 530i
1997-2003 E39 525i Wagon, 528i Wagon, 530i Wagon
Show More Show Less
Rear Bump Stop - E39 540i M-Sport II, E39 M5
For vehicles with M-Sport II suspension
Genuine BMW - Corporate Logo
T#:61088
Part#: 33532228904
Ships in 1 day
3% off MSRP $ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 33.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 32.99 USD
Free Shipping on orders $49 and up
This is the rear bump stop used in the E39 M5 and 2003 E39 540i M-Sport. There are a lot of bump stops for the E39 models and this one is one of the stiffest. Therefore it's a good fit for cars that have been lowered. However, cutting may be required on modified E39s to get the shock travel correct.

Sold each.

This item is the original part used in the following BMWs:
2003 E39 BMW 540i M-Sport II
2000-2003 E39 BMW M5
Show More Show Less

Genuine BMW - Corporate Logo
T#:61091
Part#: 33532229858
In Stock
Sale - Save 8% $ 49.67

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.94 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 49.67

This product was last offered at the strikethrough price on
08-26-2026

$ 45.94 USD
Free Shipping on orders $49 and up

This part insulates the spring from the car's body. Replace your worn, torn, dry-rotted, or missing spring pad when replacing shocks, struts, and springs.


Genuine BMW Spring Pad Upper
This item fits the following BMW Chassis:
E39 M5,E39
 

 

Show More Show Less

Genuine BMW - Corporate Logo
T#:12711
Part#: 31326769667
In Stock
6% off MSRP $ 48.49

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.55 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 48.49

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.55 USD
Free Shipping on orders $49 and up
GENUINE BMW UPPER SPRING POCKET WITH SPA:313570
Genuine BMW - Corporate Logo
T#:360898
Part#: 33551095532
Ships in 2 Business Days
Sale - Save 7% $ 66.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.00 USD
Limited Qty Sale
Free Shipping
Sale - Save 7%
$ 66.99

This product was last offered at the strikethrough price on
08-03-2026

$ 62.00 USD
Limited Qty Sale
Free Shipping
Front Upper Strut Mount - E39 540i M5 and Z8
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:2148
Part#: 31331091708
In Stock
$ 62.99 USD
Free Shipping on orders $49 and up
Upper shock mounts and bearings are good to replace while replacing front shocks. It is easier and often less expensive to replace them preventatively than to have them fail shortly afterward and have to take apart the whole suspension a second time. This front shock tower bearing fits BMW E39 540i M5 and Z8.

It's also a good idea to replace the upper spring plate and bearing at the same time. Often, these bearings are worn out and should not be put back in the car. See below for the link to add these to order too.

This item fits the following BMWs:
1997-2003 E39 BMW 540i M5
1997-2003 E39 BMW 528i 530i - only for cars with EDC - electronic damping control E52 BMW Z8 Z8 Alpina
Show More Show Less


Febi Rear Shock Mount - E39
For touring models only
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:382113
Part#: 33521093416
Ships in 1 Business Day
$ 55.99

This product was last offered at the strikethrough price on
04-22-2026

$ 47.99 USD
Free Shipping on orders $49 and up
$ 47.99 USD
Free Shipping on orders $49 and up
To be replaced when servicing rear shocks
Bilstein - Corporate Logo
T#:1959
Part#: BE5-6061-H1
In Stock
$ 155.00 USD
Free Shipping
$ 155.00 USD
Free Shipping
Position: Rear, left or right
Setting: Performance, for stock suspensions

Rear Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut, stock dust boot is re-used. Price is per shock.

This Bilstein B6 Performance rear shock fits the following BMWs:
1997-2003 E39 525i Wagon, 528i Wagon, 530i Wagon, 540i Wagon - not for cars with Self Leveling Suspension
Show More Show Less
Genuine BMW - Corporate Logo
T#:59645
Part#: 33176760336
In Stock
7% off MSRP $ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD
Free Shipping on orders $49 and up
Genuine BMW HEX BOLT WITH WASHER

Genuine BMW - Corporate Logo
T#:15524
Part#: 31352229544
Ships in 1 day
5% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 41.99 USD
Free Shipping on orders $49 and up


Genuine BMW Stabilizer Rubber Mounting - D=27mm
This item fits the following BMW Chassis:
E39 M5,E39


Bilstein B6 Performance FRONT Strut - E39 540i 1997-2003
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:2037
Part#: VE3-B408-H1
In Stock
$ 289.00 USD
Free Shipping
$ 289.00 USD
Free Shipping
Position: Front, left or right
Setting:  Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:
1997-2003 E39 540i
1997-2003 E39 540i Wagon
Show More Show Less
Front Sway Bar Link for E39 M5 and 540i
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:5238
Part#: 31351095664
Ships in 1 day
$ 34.99 USD
Free Shipping on orders $49 and up
The front sway bar links are known to fail on the E39 5 Series V8 models (540i and M5). Early sway bar link failures produce clunking noises and vibration, while more serious failure will leave the front sway bar disconnected and cause serious handling issues. This is a replacement sway bar end link for the 1997-2003 BMW 540i and 2000-2003 BMW M5 (all V8 models).

This swaybar link fits the following BMW:
1997-2003 E39 540i sedan / wagon
2000-2003 E39 M5 sedan
Show More Show Less

Bilstein - Corporate Logo
T#:1958
Part#: BE5-2829
In Stock
$ 165.00 USD
Free Shipping
$ 165.00 USD
Free Shipping
Position: Rear, Left or Right
Setting: Sport, for lowered suspensions

Rear Bilstein B8 Performance Plus shock. Sport shocks are for cars lowered from the factory ride height and are about 20% stiffer than the factory shocks. Sport shocks work great with lowering springs such as H&R or Eibach. Includes top nut, stock dust boot is re-used. Price is per shock.

This Bilstein Sport Rear Shock fits the following BMWs:
1997-2003 E39 525i, 528i, 530i, 540i
1997-2003 E39 525i Wagon, 528i Wagon, 540i Wagon - Only for cars with Self Leveling Elimination Kit
Show More Show Less
Bilstein - Corporate Logo
T#:1960
Part#: BE5-6096-H0
In Stock
$ 155.00 USD
Free Shipping
$ 155.00 USD
Free Shipping
Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.
Show More Show Less

B3 Front Coil Spring - Priced Each
For vehicles with standard suspension
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:598641
Part#: 36-129171
In Stock
$ 76.00 USD
Free Shipping
$ 76.00 USD
Free Shipping
BMW has tuned a comfortable yet performance oriented suspension system across their model offering. The springs used are a very sophisticated design with both tapered wire diameter and progressive spring rates to ensure the best possible ride quality under varying loads and conditions. Due to environmental conditions, the original coating is commonly compromised thus creating a weak point which yields to failure (cracked springs). Replace your cracked springs with replacement parts from Bilstein.
Show More Show Less

Febi Rear Subframe Bushing - E39
For touring models only
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363104
Part#: 33311094036
Ships in 2 Business Days
$ 64.60

This product was last offered at the strikethrough price on
05-29-2026

$ 57.37 USD
Free Shipping on orders $49 and up
$ 57.37 USD
Free Shipping on orders $49 and up
Used on all four corners of the rear subframe
Genuine BMW - Corporate Logo
T#:360863
Part#: 33171093008
Ships in 2 Business Days
2% off MSRP $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 50.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:20395
Part#: 31351090548
Ships in 2 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up


Genuine BMW Stabilizer Support
This item fits the following BMW Chassis:
E39 M5,E38,E39



Genuine BMW Front Bump Stop
For vehicles without M sport suspension For vehicles with production date from 10/1995. For vehicles without M sport suspension
Genuine BMW - Corporate Logo
T#:368105
Part#: 31331140140
In Stock
Sale - Save 8% $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.65 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 40.99

This product was last offered at the strikethrough price on
08-26-2026

$ 37.65 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:360824
Part#: 31351095664
Ships in 2 Business Days
3% off MSRP $ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 74.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping on orders $49 and up
Bilstein - Corporate Logo
T#:380803
Part#: 35-114093KT
In Stock
$ 678.00

This product was last offered at the strikethrough price on
05-26-2026

$ 598.00 USD
Free Shipping
$ 598.00 USD
Free Shipping

The Bilstein B8 Performance Plus Kit includes two front struts. These shocks are for use with lowered springs such as from H&R or Eibach. We do not recommend that you use them with any factory spring, including factory sport package springs. With the increased damping rates from stock you will have much more control over body motions. These will give a much more buttoned down and taut feeling with lowering springs compared to stock shocks.


These shocks fit the following BMWs:

1997-2003 E39 540i
1997-2003 E39 540i Wagon

Show More Show Less

Bilstein - Corporate Logo
T#:384735
Part#: 35-114093KT1
In Stock
$ 1,008.00

This product was last offered at the strikethrough price on
05-26-2026

$ 928.00 USD
Free Shipping
$ 928.00 USD
Free Shipping

The Bilstein B8 Performance Plus Kit includes two front struts and two rear shocks. These shocks are for use with lowered springs such as from H&R or Eibach. We do not recommend that you use them with any factory spring, including factory sport package springs. With the increased damping rates from stock you will have much more control over body motions. These will give a much more buttoned down and taut feeling with lowering springs compared to stock shocks.


These shocks fit the following BMWs:

1997-2003 E39 540i sedan/wagon
2000-2003 E39 M3

Show More Show Less

Genuine BMW Bump Stop
For vehicles with sport suspension
Genuine BMW - Corporate Logo
T#:368102
Part#: 31331138814
Ships in 2 Business Days
5% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:54700
Part#: 31321090890
In Stock
$ 20.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 20.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up


Genuine BMW Protection Cap -
This item fits the following BMW Chassis:
E38,E39


Rear Spring - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with standard suspension
Bilstein - Corporate Logo
T#:598642
Part#: 36-225859
In Stock
$ 33.00 USD
Free Shipping
$ 33.00 USD
Free Shipping
Bilstein B3 OE Replacement coil springs are designed to replace your vehicle's original springs. These coil springs are manufactured to meet all the OE dimensions, spring rates, and design types (such as miniblock or central force design). With Bilstein B3 OE Replacement coil springs, you are restoring your vehicle's suspension system function and safety to factory specifications.
Show More Show Less
Genuine BMW Upper Spring Plate
For vehicles with EDC
Genuine BMW - Corporate Logo
T#:25182
Part#: 31332283038
In Stock
5% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up


Genuine BMW Support
This item fits the following BMW Chassis:
E60 M5,E63 M6,E82 1M Coupe,E85 Z4M,E38,E39,E63,E65,E82,E85 Z4,E86 Z4,E90,E92,E93


Bilstein - Corporate Logo
T#:1961
Part#: VE3-B406-H1
In Stock
$ 289.00 USD
Free Shipping
$ 289.00 USD
Free Shipping
Position: Front, left or right
Setting: Performance, for stock suspensions

Front Bilstein B6 Performance shock. Performance shocks are for cars with the standard, factory suspension. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. Includes top nut. Price is per shock.

This Bilstein B6 Performance Front shock fits the following BMWs:
1997-2003 E39 525i, 528i, 530i
1997-2003 E39 525i Wagon, 528i Wagon, 530i Wagon
Show More Show Less

Coil Spring - Front - Priced Each
For vehicles with standard suspension
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:581957
Part#: 36-266722
Ships on Jan 12, 2027
$ 57.00 USD
Free Shipping
$ 57.00 USD
Free Shipping
Bilstein B3 OE Replacement coil springs are designed to replace your vehicle's original springs. These coil springs are manufactured to meet all the OE dimensions, spring rates, and design types (such as miniblock or central force design). With Bilstein B3 OE Replacement coil springs, you are restoring your vehicle's suspension system function and safety to factory specifications.
Show More Show Less
B4 Rear Shock - Priced Each
For sedan models only
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:344363
Part#: 19-067346
Ships in 3 Business Days
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping
Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Show More Show Less
KMAC - Corporate Logo
T#:389661
Part#: 193616-1J
Ships on Sep 28, 2026
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
Show More Show Less