BMW Drivetrain Parts for BMW 5 Series E39 (1996-2003)

The Powerflex Rear Sway Bar Bushing - 18.5 mm Street for the BMW X3 (2003-2010) is a premium suspension upgrade designed to replace the factory rubber bushings with high-performance polyurethane. This bushing specifically fits rear sway bars with a 18.5 mm diameter, providing better durability and handling for street-focused driving.

Product Features:

1. The Powerflex Rear Diff Front Mount Bushing - Flat Type for the BMW E38 7 Series and E39 5 Series is a premium suspension component designed to replace the factory rubber bushing in the front mount position of the rear differential. This high-performance polyurethane bushing is engineered to enhance drivetrain stability and improve overall vehicle performance, making it an ideal upgrade for drivers seeking longevity and sharper handling.

   Product Details:

   1. Flat-Type Design: This bushing is built with a flat-type design, which ensures a direct replacement fit for the factory-installed bushing in the front mount of the rear differential. It aligns perfectly with the BMW E38 and E39 chassis, providing an accurate and secure fit without the need for modifications.

   2. Polyurethane Material: Powerflex bushings are constructed from high-quality polyurethane, which offers superior durability compared to traditional rubber. This material is highly resistant to wear, heat, and degradation from oils and road contaminants, ensuring that the bushing remains effective for a much longer period under both normal and performance driving conditions.

   3. Enhanced Drivetrain Control: The rear diff front mount bushing plays a critical role in controlling the movement of the rear differential during acceleration, deceleration, and cornering. Powerflex's polyurethane bushing limits excessive movement and reduces drivetrain flex, leading to more consistent power delivery, reduced differential "clunking," and a smoother, more precise ride.

   4. Improved Handling: By stiffening the front mount of the rear differential, this bushing enhances the stability and control of the rear suspension, particularly during aggressive driving. Drivers will notice a reduction in body movement and improved handling characteristics, allowing for more confident cornering and better overall vehicle dynamics.

   5. Direct Replacement for OEM Bushings: Designed to replace the original rubber bushing without any additional modifications, this bushing fits seamlessly into the existing suspension setup of the BMW E38 7 Series and E39 5 Series. Installation is straightforward, and the bushing is engineered to match the factory specifications while offering a significant performance upgrade.

   6. Long-Lasting Durability: Polyurethane bushings are designed to withstand harsh conditions and prolonged use, far outlasting the OEM rubber components. This bushing resists cracking, warping, and deterioration over time, ensuring that it maintains its structural integrity and performance even after years of use.

   Advantages:

   • Increased Drivetrain Stability: Reduces differential movement, providing a smoother and more stable power transfer to the rear wheels.
   • Better Handling Response: Enhances rear-end control during acceleration, deceleration, and cornering, improving overall vehicle dynamics.
   • Long-Lasting Material: Outlasts rubber bushings, offering a cost-effective, long-term suspension upgrade.
   • Direct OEM Fitment: Simple replacement with no modification required, ensuring an easy installation process.

   Fitment:

   • BMW E38 7 Series (1994-2001)
   • BMW E39 5 Series (1995-2003)

   Key Benefits:

   • Reduced Drivetrain Slack: Minimizes play in the rear differential, eliminating clunks and improving overall ride quality.
   • Durable and Resilient: Made from high-performance polyurethane that resists damage from road debris, oils, and extreme temperatures.
   • Perfect for Daily or Performance Driving: Balances improved handling with everyday comfort, making it a suitable upgrade for both street and spirited driving.

   For BMW E38 7 Series and E39 5 Series owners looking for a reliable, long-lasting upgrade, the Powerflex Rear Diff Front Mount Bushing - Flat Type delivers improved handling, enhanced drivetrain control, and a more responsive driving experience. This is a vital upgrade for maintaining the performance and reliability of your rear suspension system.

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version.

• FX400 (Stage 4)

• High performance street system

• Holding capacity 70% over stock

• Heavy-Duty reinforced pressure plate

• Hi-Leverage™ pressure ring design

• Sprung hub/cushioned disc

• Steel-backed Ceramic Lined Sprung Disc friction material

*This clutch kit does not include a flywheel. Requires use of single mass flywheel 

The Powerflex Rear Differential Rear Mount Bushings for the BMW E39 5 Series are designed to provide a significant upgrade to the vehicle's rear differential system by replacing the stock rubber bushings with high-performance polyurethane. This enhancement leads to improved handling, stability, and durability.

Key Benefits:

1. Enhanced Differential Control: The stiffer polyurethane material reduces unwanted movement and flex in the differential mount, ensuring better alignment and stability under load. This translates to improved power delivery and handling during cornering and acceleration.

2. Increased Longevity: These bushings are crafted to resist wear and degradation from oil, heat, and road debris, offering superior durability compared to traditional rubber bushings. This longevity ensures that the performance benefits are maintained over time.

3. Improved Driver Feedback: By minimizing movement in the rear differential, these bushings enhance the connection between the vehicle and the driver. This results in better feedback and control, allowing for a more engaging driving experience.

4. Direct Fit for Easy Installation: Designed specifically for the E39 5 Series, these bushings fit directly into the existing differential mounts, facilitating a hassle-free installation process without the need for modifications.

This upgrade is perfect for BMW E39 5 Series enthusiasts who want to improve their vehicle's handling and performance, making it suitable for both daily driving and spirited performance applications. The Powerflex Rear Differential Rear Mount Bushings provide a reliable solution to enhance the overall effectiveness of the rear suspension system.

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

• Reduced mass equals increased acceleration
• CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
• CM uses an OE steel ring gear secured by bolts
• CM offers a limited lifetime warranty
• CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

Performance clutch installation kit includes everything you need for a stage one clutch upgrade. Dampened Disc version. 

• FX300 (Stage 3)

• High performance street system

• Holding capacity 70% over stock

• Heavy-Duty reinforced pressure plate

• Hi-Leverage™ pressure ring design

• Ridged hub/cushioned disc

• Steel-backed Sprung Hub Segmented Kevlar Disc friction material

*Does not include flywheel. requires use of single mass flywheel  

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel 

All sets of 12 now 10% off regular price!

Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. ATF D4 is similar to Red Line's MTL formula and can be used in many BMW manual transmissions where MTF or MTF-LT2 is called for. The D4 ATF provides significantly improved gear protection than most OEM oils. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.

Features:

• Provides G-4 level gear protection (suitable for transmissions and transaxles, like the Corvette T-56).
• Provides smooth and consistent shifts.
• More stable than petroleum fluids; suitable for extended drain intervals.
• Does not varnish at high temperatures.
• Improved cold weather characteristics.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

BMW E39 M5 Stage 3 Daily Clutch Kit is the ultimate upgrade for your BMW E39 M5, offering enhanced performance and durability for daily driving. This high-performance clutch kit is engineered to handle increased power and torque, providing a smooth and responsive driving experience. Designed specifically for the BMW E39 M5, it ensures a perfect fit and seamless integration with your vehicle's transmission system.

Upgrading to the Stage 3 Daily Clutch Kit is ideal for drivers seeking improved clutch engagement and longevity without sacrificing comfort. This kit is built to withstand the demands of both spirited driving and everyday use, making it the perfect choice for BMW enthusiasts.

• Enhanced performance and durability for daily driving
• Smooth and responsive clutch engagement
• Handles increased power and torque
• Perfect fit and seamless integration with BMW E39 M5
• Built to withstand demands of spirited and everyday driving