BMW Intake Parts for BMW 5 Series E39 (1996-2003)

BMW E39 M62 4" Silicone Intake Boot is engineered to enhance air flow and performance compared to the factory corrugated rubber boot. Designed by Turner Motorsport, this intake boot features smooth contours and stepped flanges to ensure a seamless transition from the air box to the throttle body. The single-piece construction simplifies installation, offering a straightforward replacement for the stock two-piece design.

• Improved Air Flow: Smooth contours enhance air flow compared to the OE corrugated rubber boot.
• Seamless Transition: Stepped flanges maintain a smooth internal diameter transition.
• Simplified Installation: One-piece design makes installation quick and easy.
• Durable Construction: Made from 5-ply reinforced silicone for enhanced durability and performance.
• Enhanced Resistance: Offers reduced thermal conductivity and superior resistance to ozone and UV degradation.

The stock rubber intake boot often fails due to its accordion section, leading to vacuum leaks, rough idle, and increased fuel consumption. Upgrading to the Turner Motorsport silicone intake boot will eliminate these issues and improve overall performance.

NOTE: This boot is a direct fit for the M62Tu (9/1998+). It will fit the non-TU (pre-9/1998) models with a slight relocation of the MAF sensor.

No more slow starts! Does your car feel old? Age may not be the issue at all, your throttle cable bushings are mostly likely worn out and your car has lost its pep!

Your throttle cable is the main connection you have from the gas pedal to the throttle body. Do you have hesitation or delayed pedal response? Think of when you are sitting at a stop light or making a turn into a flow of traffic, you may not realize it but if you haven't replaced your throttle cable and bushings this will require you to apply pressure to the gas pedal before getting feedback which can cause slow starts at stop lights and put you in danger when merging in traffic. These are not issues with old cars, they are issues related to your throttle response!

Symptoms to look for: lackluster/sloppy throttle actuation, deformed throttle cable appearance, and bushing condition. Your throttle cable bushings can be soft, cracked or even disintegrated by now.

Upgrade from failed rubber to new billet aluminum bushings for quick gas pedal response and a better engagement with your car.

Due to weak plastic construction, the factory plastic crankcase ventilation breather hose is known to fail. After years of exposure to piping-hot engine bay temperatures and chemical-laden oil vapors, the corrugated plastic tubing can crack, crumble, or fail altogether.

We set out to bulletproof your M52/S52 CCV system with a durable silicone breather hose, designed to provide a comprehensive upgrade and permanent replacement for the factory plastic hose. By replacing the flimsy, heat-hardened OEM plastic hose with a four-ply fluorosilicone hose, you'll experience peace of mind knowing your M52 or S52 is free from the inevitable return of oil leaks, vacuum leaks, and drivability concerns that would have been.

This breather hose is found at the front of the engine, and is used to connect the cyclone separator to the valve cover. It replaces OEM part number 11151703775.

Features:

Silicone construction ensures a durable replacement that is sure to outlast OE plastic Designed as a direct replacement for the factory breather hose - not too short like many aftermarket alternatives, and does not require cutting to fit Works seamlessly with the OEM OBDII valve cover and cyclone separator, as well as the Turner Motorsport Billet Aluminum Valve Cover (T#26238386) Design:

Three-ply wire-reinforced fluorosilicone hose is designed to resist degradation due to exposure to oil vapors O-rings are pre-installed in OE Norma connectors for a lasting seal Includes pre-installed 430 stainless steel hose clamps for durability and corrosion-resistance Product Development:

Our Silicone CCV Hose Upgrade was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E36 3 series: 323i 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1992-1998
E46 3 series: 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 1999-2005
E39 5 series : 525i 528i 530i 1997-2003
E85 X3 : X3 2.5i X3 3.0i 2004-2006
Z3 : Z3 2.3 2.5 2.8 3.0 1997-2002
E85 Z4 : Z4 2.5i Z4 3.0i M54 engine 2004-2006

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

The TMS E36/Z3 6cyl Intake Tube Plug is intended to be used in a variety of applications ranging from ASC delete, deleting the idle control valve in a car with a aftermarket engine management system, re-routing the PCV hose to a catch can, aftermarket supercharged engines, or simply plugging one of the hose provisions in the E36 6cyl intake tubes. It also works great as a coolant hose plug. The diameter of the tip is 20mm (just over 3/4"). A low profile Oetker compression clamp is included. The plug can be drilled and tapped for a small air temp/water temp sensor, pre throttle body vacuum/boost/MAP sensor barb, or water alcohol/nitrous/methanol injector or barb. Works with M50, M50TU S52, M52, S52 throttle boots and may work in other applications with a 20mm hose.

Installation Instructions / More Details

This intake tube plug can be used in a variety of ways on these BMWs:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic
1999-1999 E36 328is, 328ic
1995-1999 E36 M3 coupe, sedan & convertible
1997-1999 Z3 2.8 liter
1992-1995 M50 engine (2.5 liter)
1996-1999 M52 engine (2.8 liter)
1995-1995 S50 engine (3.0 liter / US engine)
1996-1999 S52 engine (3.2 liter / US engine)

AFE Summer Rebate Form

"Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

This aFe Intake kit fits the following BMWs:

E39 5 series: BMW 525i 528i 1997-2003

Clickhere for installation instructions.

Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)

Clickhere for installation instructions.

Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

This part fits the following BMWs:
1998 - 2004 E39 525i 528i 

AFE Summer Rebate Form

"Oil-Free" ProDry S Filter

This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By converting your stock intake air boxes, you are improving the most restrictive portion of your M5's intake system, increasing horse power by 10 hp, torque by 10 lb/ft, improving acceleration as well as throttle response.

10hp max gain, 10 lb/ft torque max gain

Clickhere for installation instructions.