BMW E39 M62 4" Silicone Intake Boot is engineered to enhance air flow and performance compared to the factory corrugated rubber boot. Designed by Turner Motorsport, this intake boot features smooth contours and stepped flanges to ensure a seamless transition from the air box to the throttle body. The single-piece construction simplifies installation, offering a straightforward replacement for the stock two-piece design.

• Improved Air Flow: Smooth contours enhance air flow compared to the OE corrugated rubber boot.
• Seamless Transition: Stepped flanges maintain a smooth internal diameter transition.
• Simplified Installation: One-piece design makes installation quick and easy.
• Durable Construction: Made from 5-ply reinforced silicone for enhanced durability and performance.
• Enhanced Resistance: Offers reduced thermal conductivity and superior resistance to ozone and UV degradation.

The stock rubber intake boot often fails due to its accordion section, leading to vacuum leaks, rough idle, and increased fuel consumption. Upgrading to the Turner Motorsport silicone intake boot will eliminate these issues and improve overall performance.

NOTE: This boot is a direct fit for the M62Tu (9/1998+). It will fit the non-TU (pre-9/1998) models with a slight relocation of the MAF sensor.

No more slow starts! Does your car feel old? Age may not be the issue at all, your throttle cable bushings are mostly likely worn out and your car has lost its pep!

Your throttle cable is the main connection you have from the gas pedal to the throttle body. Do you have hesitation or delayed pedal response? Think of when you are sitting at a stop light or making a turn into a flow of traffic, you may not realize it but if you haven't replaced your throttle cable and bushings this will require you to apply pressure to the gas pedal before getting feedback which can cause slow starts at stop lights and put you in danger when merging in traffic. These are not issues with old cars, they are issues related to your throttle response!

Symptoms to look for: lackluster/sloppy throttle actuation, deformed throttle cable appearance, and bushing condition. Your throttle cable bushings can be soft, cracked or even disintegrated by now.

Upgrade from failed rubber to new billet aluminum bushings for quick gas pedal response and a better engagement with your car.

This is a replacement air filter for your Dinan air intake. Replace your dirty, damaged, or lost filter to restore the performance you expect of Dinan and your BMW.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Experience the Eventuri S62 Carbon Fiber Plenum Lid

Introducing Eventuri's S62 Carbon Fiber Plenum Lid, a true masterpiece meticulously crafted from 100% prepreg carbon fiber. This plenum lid seamlessly replaces the standard plastic version, elevating the acoustic signature of the BMW S62 V8 engine. Although it doesn't provide a performance boost, it revolutionizes the auditory thrill of driving the M5/Z8, introducing a fresh dimension to the driving experience.

The resulting sound profile is a symphony of automotive excellence, featuring a deep, resonant tone at low RPMs that gradually ascends in pitch as acceleration intensifies. As you reach higher RPMs, this plenum lid imparts a sound reminiscent of the iconic CSL, creating an intoxicating driving experience. Eventuri's journey involved experimenting with different carbon thicknesses to fine-tune the sound, resulting in a plenum lid that not only increases volume but also produces a melodious induction sound.

Please note that this product does not include the M-Badge or M-Power Strip.

Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.

When it comes to styling a vehicle the proper look is one that compliments not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. 

Made from 100% prepreg carbon fiber of the highest quality, the workmanship on the housing is second to none. This encapsulates the filter and is mated to an anodized aluminum inlet cowl to ensure a smooth inlet flow path. The filter itself is a deep pleated, high flow double cone configuration which is dry to avoid damaging the MAF sensor. Finally, the assembly is then mated to an aluminum heat shield which effectively shrouds the intake from engine bay heat and captures the ambient air being diverted from the scoop. Also, notice the rubber spacer on the mount of the heat shield - this is for the headlight module to sit on so that it remains at the right height - small details are important! 

100% Prepreg carbon fiber with a CNC machined collar - the air scoop forces ambient air directly into the filter opening. This scoop simply clicks into place in the front right-hand brake duct and effectively saturates the mouth of the intake with cold air. It has been designed to take up half the height of the duct in order to allow airflow to still continue through the duct for the brakes. The scoop is so effective that even after a hard drive, the aluminum cowl at the mouth of the intake will still feel cold to touch! 

Each intake system includes:

• Prepreg Carbon Fiber Venturi Housing
• High Flow Double Cone Air Filter
• Aluminum Cowl for smooth airflow entry
• Prepreg Carbon Fibre Intake Tube with integrated MAF Sensor Mount
• Prepreg carbon Fibre Air Scoop
• Laser Cut Intake Duct
• Laser Cut Stainless Steel Brackets
• High-quality Silicon couplers with BMW specification hose clamps

This part fits the following BMWs:
1998 - 2004 E39 M5

The rubber hoses and oil separator can crack or become faulty, leading to vacuum leaks or oil leaks. This is caused by the stress the components are exposed to during heating and cooling cycles, especially if the vehicle is not brought up to operating temperature during driving in cold weather climates.

This kit includes the needed hoses, oil separator, mounting grommet, and hardware.

Fits the following BMWs:
1998-2003 E39 BMW M5

If you're seeking to eradicate vacuum leaks and enhance the overall airflow of your intake system, look no further than this comprehensive kit.

The M52TU/M54 air intake boots have gained notoriety for their tendency to crack, resulting in vacuum leaks, triggering check engine lights, and causing various performance issues. The soft rubber boots are constantly exposed to high temperatures from the engine, leading them to become brittle and prone to cracking over time. These cracks permit unmeasured air intake beyond the airflow meter, resulting in rough idling, sputtering, or even engine stalls.

This kit offers a solution by providing both lower and upper air intake boots/hoses for a complete repair. Additionally, as a bonus, the kit includes an ECS Exact-Fit High-Flow Air Filter to optimize your vehicle's intake tract.

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

• Enhances performance and efficiency for BMW and MINI vehicles
• Maximizes power output while ensuring engine safety
• Internal MAP sensor for precise control
• 35PSI maximum pressure capacity for reliability
• Improves horsepower, torque, and fuel economy