Upgrade to wheel studs from bolts for an enhanced connection and easier wheel installation. Racing entities often require wheel studs for better wheel-to-hub contact, offering improved confidence during high-speed performance. Turner Motorsport's wheel studs are designed to accommodate various spacer widths effortlessly, simplifying the setup process. Discover why this switch from bolts to studs can make a significant difference:

• Simplifies spacer usage with a single application designed for various spacer widths
• Wheel studs act as a wheel hanger, easing wheel installation
• Reduces constant wheel bolt removal, minimizing wear on wheel hubs
• Facilitates quick and easy tire changes as the studs stay in the hub
• Recommended torque of 15Nm with thread-locking compound during installation
• Compatible with spacers up to 20mm in size

Angel eyes are an important aspect in the styling of your BMW, giving it a unique and aggressive appearance. Unfortunately, the halogen bulbs used to illuminate the angel eye rings tend to fade over time, making the rings look dull and yellow. Ziza Performance LED bulbs are the perfect upgrade to not only increase the brightness by 3 times, but also give the rings a more crisp, white light and a longer life span. In addition, these bulbs will not give you a bulb out warning, a common problem with poor quality alternatives.

LED angel eye features:

• 600 Lumen light output 
• 6000K light color 
• Up to 30,000 hour life span 
• OEM installation 
• Error code free
• Up to 3 times brighter then OEM

Fits the following BMWs:
2004-2006 E60 BMW 525i/xi 530i/xi 545i 550i M5 Pre-LCI
2004-2006 E61 BMW 530xi
2004-2007 E63/4 BMW 645Ci Pre-LCI
2002-2008 E65/6 BMW 745i/Li 750i/Li 760i/Li B7 Alpina
2007-2010 E83 BMW X3 N52 3.0L
2003-2006 E53 BMW X5 M54 3.0L
2004-2006 E53 BMW X5 N62 4.4L 4.8L
09/2000-2003 E39 BMW 525i 530i 540i M5

**This non-DOT approved product is for Off-road/Track use only. Not approved for legal street use**

Perfect for DIY enthusiasts, this all-in-one kit has everything you need to refresh your ignition system! With just one click, you'll get high-quality, matching replacement parts, making it simpler than ever to service and restore your ignition system.

If you're noticing misfires, poor fuel economy, reduced engine performance, or ignition-related diagnostic trouble codes (DTCs), a failing ignition coil is likely the cause. Late-model BMWs, such as the E60 M5, E63 M6, and E64 M6, use a coil-on-plug ignition system, where each cylinder has its own coil and spark plug for efficient ignition. When a coil fails, the affected cylinder won't receive a spark and will misfire. Even if the misfire doesn’t trigger a DTC, you’ll still feel the difference in engine performance—rough idling, hesitation during acceleration, or a strong fuel smell. To avoid these issues, we recommend replacing your ignition coils every 40,000-60,000 miles.

The S85's MSS65 DME uses a unique ignition system known as Ionic Current Control. BMW engineers developed this system to more accurately detect pre-ignition and misfires in the high-revving, ten-cylinder S85. Instead of relying on conventional knock sensors, the system uses each spark plug as a current probe, applying a low voltage to the electrode immediately after the power stroke and sending the resulting current to the Ionic Current Control Unit (ISS) for evaluation. This allows for precise monitoring of combustion events. To support this, the S85’s ignition coils are specially designed with a modified “pencil” shape and lack the typical Zener diode in the secondary winding, allowing for accurate current measurements without triggering fault codes in the engine control unit (DME). Bavarian Autosport ignition coils are manufactured to the exact specifications of the OE Ionic Current Control-compatible ignition coils, and will not trigger ignition-related fault codes in the DME.

Bavarian Autosport ignition coils are engineered for reliability, delivering a consistent, long-lasting spark. These high-quality OE replacement coils are specifically designed for your S85-powered E60 M5, E63 M6, or E64 M6. Constructed with durable, heat-resistant plastic and featuring premium rubber spark plug boots, each boot is pre-lubricated with dielectric grease to ensure smooth installation and prevent corrosion.

Features & Benefits:

Bavarian Autosport Ignition Coils - Set of Ten Durable, temperature-resistant plastic construction is designed to withstand extreme heat and harsh conditions, ensuring long-lasting performance. High-quality rubber spark plug boots are pre-lubricated with dielectric grease to prevent moisture intrusion and potential corrosion. Built to meet or exceed OE manufacturing standards, guaranteeing a perfect fit, reliable performance, and seamless installation. NGK 4471 LKR8AP Spark Plugs - Set of Ten Multi-ground electrodes improve ignition capability and are less sensitive to increased voltage use with gap growth. Corrugated ribs prevent flashover. Copper core aids in heat removal. Pre-gapped to 0.035" (0.9mm) OEM-specified spark plug for all S85 applications.

Elevate Your Vehicle's Lighting with Ziza Pure Yellow H8 Bulbs

Upgrade your vehicle's lighting with Ziza Pure Yellow H8 bulbs, meticulously designed to replace your stock bulbs. These bulbs emit a rich yellow light, effectively improving anti-glare visibility in challenging weather conditions such as rain and low-light situations.

Ziza, a prominent manufacturer and distributor of performance automotive lighting products, proudly presents a new line of products that push the boundaries of automotive lighting.

Key Features:

• Ziza Pure Yellow H8 replacement bulbs
• Rich yellow light for enhanced visibility in adverse weather
• Significantly improves anti-glare performance

Please be aware that this product is specifically intended for off-road and track use and is not approved for legal street use.

BMW LED License Plate Bulbs - Pair: Upgrade Your BMW's License Plate Lighting

• Provides brighter and more energy-efficient lighting
• Enhances the appearance of your BMW's license plate
• Easy plug-and-play installation process
• Long-lasting performance for years to come

Upgrade your BMW's license plate lighting with the BMW LED License Plate Bulbs - Pair. These bulbs provide brighter and more energy-efficient lighting for your BMW's license plate, enhancing its appearance and visibility. With an easy plug-and-play installation process, you can quickly upgrade your BMW's lighting without any hassle. Plus, these bulbs offer long-lasting performance, ensuring years of reliable use.

Upgrade your vehicle's lighting with Ziza Pure Yellow 9006 bulbs, designed to enhance your visibility in low light conditions. These bulbs will replace your stock ones and emit a rich yellow light, improving anti-glare visibility, especially during rain and low light situations.

• Ziza Pure Yellow 9006 bulbs for enhanced visibility.
• Non-DOT approved product for off-road and track use.
• Replaces stock bulbs for improved performance.
• Ideal for challenging weather conditions.
• From a trusted manufacturer of automotive lighting products.

Ziza presents a range of high-performance automotive lighting solutions, including LED bulbs, HID bulbs, clear lens side markers, and smoked lens side markers. Their Pure Yellow 9006 bulbs are engineered to provide the brightness and visibility you need in adverse weather, making them perfect for off-road and track use.

Please note that this product is non-DOT approved and is intended for off-road and track use only. It is not approved for legal street use.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Rod bearings should be replaced as a preventative measure before 80,000 miles. This package is the most complete rod bearing overhaul kit available and includes not just the latest BMW rod bearings and connecting rod bolts, but also everything else that should be replaced with the oil pan and front subframe off the car.

Rod bearings continue to be a sore subject among M3, M5, and M6 owners. The rod bearings in the S85 V10 have been known to fail within 60,000 miles. There could be a number of reasons for premature failure with a lot of finger-pointing as to the real cause. Whatever the reason, rod bearings are wearing out sooner than expected and their replacement should be considered a required preventative maintenance item. We suggest a replacement interval of between 60,000-80,000 miles with frequent engine oil analysis done along the way*. Driving moderately and allowing the engine to warm up before hard use will also extend rod bearing life.

After doing so many rod bearing replacements in our own service shop we have put together this comprehensive overhaul package. Our package includes -

Genuine BMW rod bearings
- 11247841703, upper bearings - latest design from BMW (either original or WPC treated**)
- 11247841702, upper bearings - latest design from BMW (either original or WPC treated**)
- 11247834522, connecting rod bolts
- Red Line engine assembly lube

Oil Pan
- 11137836361, oil pan gasket
- 07119905485, oil pan screws (required by BMW)
- 07129905600, oil pan screws (required by BMW)
- 11137836568, oil pan screws
- 07119963129, seal washers
- 11417836233, auxiliary oil pump gaskets
- 11121304174, oil pickup tube o-ring

Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).

* BMW released an updated rod bearing around 2011 that uses different materials than the original design. The old rod bearings were constructed with several layers or metal, including copper and lead. If an engine oil analysis revealed high levels of these specific metals then it was a sure sign that the rod bearings were nearing replacement. However, the new BMW bearings do not use copper or lead so an oil analysis will not alert you to heavy bearing wear. The new bearings are also a harder material which prolonged the life of the bearing but increased the liklihood of crankshaft damage if a bearing failed. Even though the bearing theoretically lasts longer it's even more important to preventativly replace them before they damage the crankshaft.

** These WPC-treated bearings are the best we have seen for the S85. WPC is a shot-peening treatment at a microscopic level. It's perfect for sensitive surfaces like bearings. The WPC treatment removes imperfections and high spots, while creating a surface that retains oil better than the original surface. This greatly reduces friction. The bearings in this kit are factory BMW bearings that are sent to WPC for treatment. The treated bearings are stronger with less metal fatigue and less friction than buying off-the-shelf bearings from the dealer.

***BE Bearings is another top pick when considering which bearing kit to choose. Working with Clevite, an OE bearing supplier, their design allows for a bit more clearance than stock, allowing better oil circulation and reducing friction. The material is also made from the original bearing composition of lead-copper, not the updated tin-aluminum used in factory BMW bearings which was excessively hard, potentially damaging the crankshaft when high friction occurred. This softer metal composition can also be tested for via oil analysis, allowing you to see high bearing wear, something the tin-aluminum bearings don't give you the ability to do.

Internal VANOS Pressure Line
One of the VANOS oil lines runs along the inside of the timing chain cover and into the oil pan. It can only be replaced with the oil pan removed. If you have sluggish performance or VANOS fault codes this is one of the common causes and now is the perfect time to replace it. If it fails down the line the oil pan will have to be removed again.

Front Subframe Hardware
Our preferred procedure for accessing the engine block is by disconnecting the control arms and steering rack and then removing the front subframe altogether. This hardware is not required but may be a good idea, especially if your original subframe bolts are rusty. Hardware includes:
31106760222, front subframe mounting bolts
31106770256, front subframe mounting bolts
33326760668, front wishbone collar nut

Tie Rod Boots
32106765782, tie rod boot kit

Motor Mounts with Hardware
22116762607, left motor mount
22116762608, right motor mount
07129904088, motor mount bolts
07129904865, motor mount nuts

Engine Oil Change
Liqui Moly GT1 10w-60 engine oil
11427840594, OEM oil filter.

This package fits the following BMWs:
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6

BMW E60 E61 Master LED Interior Lighting Kit: Illuminate Your BMW's Interior

• Enhances visibility inside the car
• Provides a modern and stylish lighting upgrade
• Energy-efficient LEDs for longer lifespan
• Easy plug-and-play installation

Illuminate your BMW's interior with the BMW E60 E61 Master LED Interior Lighting Kit. This comprehensive kit is designed specifically for BMW E60 and E61 models, providing a modern and stylish lighting upgrade for your car's interior. The energy-efficient LEDs not only enhance visibility inside the car but also offer a longer lifespan compared to traditional bulbs. With an easy plug-and-play installation process, upgrading your BMW's interior lighting has never been easier.

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Mahle-Behr thermostat
• Geba water pump
• Vaico coolant
• Mounting hardware required for the water pump
• O-rings for the thermostat housing

This item fits the following BMWs:
2005+ E60 BMW M5
2005+ E63 BMW M6

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Upgrade your vehicle's lighting with Ziza Platinum White 9006 bulbs, replacing stock bulbs with a clean white light for enhanced visibility. As a leading manufacturer and distributor of performance automotive lighting products, Ziza brings innovation to LED bulbs, HID bulbs, clear lens side markers, smoked lens side markers, and more. Take your automotive lighting to the next level with Ziza's high-quality products.

This non-DOT approved product is for Off-road/Track use only. Not approved for legal street use

Illuminate your car's interior with the ZiZa 8 chip 42mm white LED festoon bulb. This high-quality LED bulb provides brilliant white light, enhancing visibility and style in your vehicle's interior. Upgrade to ZiZa LEDs for a crisp, modern lighting solution.

39mm White CANBUS LED Festoon Bulb

Illuminate your vehicle with the 39mm White CANBUS LED Festoon Bulb, the perfect upgrade for your car's interior or exterior lighting. This energy-efficient LED bulb emits a bright white light, providing superior visibility and a modern, sleek look.

Designed with CANBUS technology, it ensures compatibility and prevents errors in most vehicle models. Easy to install, this festoon bulb offers long-lasting durability, making it a reliable choice for enhancing your car's lighting system.

Upgrade to the 39mm White CANBUS LED Festoon Bulb and experience improved illumination and style for your vehicle.

Upgrade your BMW's lighting with the ZiZi Twist-In White LED Bulb from Turner Motorsport. This versatile bulb offers compatibility with various models, including 53, 57, 182, 257, and more. Please note that this non-DOT approved product is intended for off-road/track use only and is not approved for legal street use.

• Enhance visibility and style with bright white LED lighting
• Versatile compatibility with multiple bulb interchange numbers
• Ideal for off-road and track use, not legal for street use