BMW Engine Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Eldor - Corporate Logo
T#:641259
Part#: 12138657273
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
Used in a wide variety of BMW engines to ensure proper spark plug operation.
Eldor - Corporate Logo
T#:29234309
Part#: 12138616153
In Stock
$ 43.99 USD
Free Shipping on orders $49 and up

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

Show More Show Less
OEM Rein Oil Pan Bolt Set - M54 N52 N54 N55
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:379282
Part#: 11132210959
In Stock
$ 44.89 USD
Free Shipping on orders $49 and up

This is a replacement set of bolts for the oil pan on your BMW equipped with an M54, N52, N54, or N55. The stock bolts are easy to strip, break, or even lose. Replace your missing or damaged bolts with all new hardware from OEM Rein to ensure a tight seal all around your oil pan and prevent oil leaks.

Check fitment with our guide above to ensure these are the oil pan bolts required for your vehicle.

Show More Show Less

BMW M20 M50 M52 M54 Oil Pan Gasket - Elring
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:579621
Part#: 424.51
In Stock
$ 23.99 USD
Free Shipping on orders $49 and up

Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 205.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
Elring - Corporate Logo
T#:2859
Part#: 11611436631
In Stock
$ 32.99

This product was last offered at the strikethrough price on
08-04-2026

$ 32.95 USD
Free Shipping on orders $49 and up
$ 32.95 USD
Free Shipping on orders $49 and up
This intake manifold gasket set fits BMW E46 323i 323ci 325i 325ci 325xi 330i 330ci 330xi - E39 528i 525i 530i -1999-2003 - E60 525i 525xi 530i 530xi 2004-2005 - X3 2.5i 3.0i - X5 3.0i - Z3 2.5i 2.8i 3.0i 1999-2002 - Z4 2.5i 3.0i 2003-2006.
With more than 100 years in the industry, Elring is one of the oldest names in the European autoparts segment. Delivering OE-quality you can rest assured the job will be done right the first time.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2006 E46 BMW 325i 325ci 325xi only with M54 engine
1999-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.5i Z3 2.8 Z3 3.0i
2003-2006 Z4 BMW Z3 2.5i Z3 3.0i
Show More Show Less

N54/N55 Low Temp Oil Thermostat Kit - 70c
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:52621839
Part#: 008731KT1
In Stock
New Item
Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD
Free Shipping on orders $49 and up

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:​

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less
Ina - Corporate Logo
T#:2045
Part#: 11281748131
In Stock
$ 20.25 USD
Free Shipping on orders $49 and up
$ 20.25 USD
Free Shipping on orders $49 and up

This is an OEM INA tensioner pulley, also known as the adjusting pulley and lower pulley. This pulley is mounted on the belt tensioner near the center of the belt assembly. The upper and lower pulleys are known to be the primary sources for 'belt squealing'. This pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

This pulley is mounted along with the hydraulic belt tensioner but can be replaced on its own. It is used for the main drive belt on the M50-M54 family engines (M50, M50TU, M52, S52, M52TU, M54, M56, and S54 engines). This is the same belt that covers the water pump/alternator/power steering systems. Replacement is a very easy procedure (requires fan removal) and will have your engine purring in no time. Belt replacement is strongly recommended at the same time. If you have a mechanical belt tensioner, the pulley can only be replaced with a new tensioner.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

If you need the hydraulic belt tensioner, click here.

This item is 70mm Diameter. Please check the diameter before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i - Only for Hydraulic Tensioner
1999-2000 E46 323i, 323Ci, 328i, 328Ci - Only for Hydraulic Tensioner
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi - Only for Hydraulic Tensioner
2001-2006 E46 M3 coupe & convertible - Only for Hydraulic Tensioner
2000-2006 X5 3.0 liter (E53 chassis)
2004 E60 525i, 530i (M54 engine)
1997-2002 Z3 & MZ3 2.5, 2.8, 3.0, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

Show More Show Less

Elring Crankshaft Seal (90 X 110 X 12)
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:402004
Part#: 11142249533
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up

VANOS Solenoid Valve Kit - N52 N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:25805743
Part#: 11367585425TKT
In Stock
Sale - Save 25% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 112.55 USD
Free Shipping on orders $49 and up
Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
Show More Show Less
Elring Valve Cover Gasket - N54 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362693
Part#: 11127565286
In Stock
$ 36.99 USD
Free Shipping on orders $49 and up

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N54 3.0L

Show More Show Less
Packaged by Turner - Corporate Logo
T#:15677580
Part#: 11427540759-KT
In Stock
Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.34 USD
Free Shipping on orders $49 and up
This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)


Elring Oil Pan Gasket - N52 N54 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:376168
Part#: 11137548031
In Stock
$ 37.99 USD
Free Shipping on orders $49 and up

If oil is leaking from the seal at the oil pan and block, you will need a new oil pan gasket. It is also wise to change this any time you have to pull the oil pan gasket.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L
N54 3.0L

Show More Show Less
Elring Rear Crankshaft Seal
For vehicles with production date up to 01/2009
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:591493
Part#: 11117584398
In Stock
$ 23.99 USD
Free Shipping on orders $49 and up
$ 23.99 USD
Free Shipping on orders $49 and up
90x110x12mm - usually replaced when servicing the timing chains
Elring Valve Cover Gasket Set - N52 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362566
Part#: 11127582245
In Stock
$ 33.99 USD
Free Shipping on orders $49 and up

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

  • Valve cover gasket
  • Spark plug seals

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L

Show More Show Less

N54 Valve Cover Upgrade Kit - BMW N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:25772568
Part#: 11127565284MTKT
In Stock
Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
Sale - Save 23%
$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD
Free Shipping on orders $49 and up
The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.
Show More Show Less

Elring Oil Pan Gasket - S85, E60 M5, E63 M6, E64 M6
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:387854
Part#: 11137836361
In Stock
$ 36.99

This product was last offered at the strikethrough price on
08-14-2026

$ 36.89 USD
Free Shipping on orders $49 and up
$ 36.89 USD
Free Shipping on orders $49 and up

If oil is leaking from the seal at the oil pan and block, you will need a new oil pan gasket. It is also wise to change this any time you have to pull the oil pan gasket.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
S85 5.0L

Show More Show Less
Ignition Service Kit - E60 M5, E63/E64 M6 S85 5.0L
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:39261787
Part#: 056059LA02KT3
In Stock
Sale - Save 22% $ 587.99

This product was last offered at the strikethrough price on
05-03-2026

$ 459.43 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 587.99

This product was last offered at the strikethrough price on
05-03-2026

$ 459.43 USD
Free Shipping on orders $49 and up

Perfect for DIY enthusiasts, this all-in-one kit has everything you need to refresh your ignition system! With just one click, you'll get high-quality, matching replacement parts, making it simpler than ever to service and restore your ignition system.

If you're noticing misfires, poor fuel economy, reduced engine performance, or ignition-related diagnostic trouble codes (DTCs), a failing ignition coil is likely the cause. Late-model BMWs, such as the E60 M5, E63 M6, and E64 M6, use a coil-on-plug ignition system, where each cylinder has its own coil and spark plug for efficient ignition. When a coil fails, the affected cylinder won't receive a spark and will misfire. Even if the misfire doesn’t trigger a DTC, you’ll still feel the difference in engine performance—rough idling, hesitation during acceleration, or a strong fuel smell. To avoid these issues, we recommend replacing your ignition coils every 40,000-60,000 miles.

The S85's MSS65 DME uses a unique ignition system known as Ionic Current Control. BMW engineers developed this system to more accurately detect pre-ignition and misfires in the high-revving, ten-cylinder S85. Instead of relying on conventional knock sensors, the system uses each spark plug as a current probe, applying a low voltage to the electrode immediately after the power stroke and sending the resulting current to the Ionic Current Control Unit (ISS) for evaluation. This allows for precise monitoring of combustion events. To support this, the S85’s ignition coils are specially designed with a modified “pencil” shape and lack the typical Zener diode in the secondary winding, allowing for accurate current measurements without triggering fault codes in the engine control unit (DME). Bavarian Autosport ignition coils are manufactured to the exact specifications of the OE Ionic Current Control-compatible ignition coils, and will not trigger ignition-related fault codes in the DME.

Bavarian Autosport ignition coils are engineered for reliability, delivering a consistent, long-lasting spark. These high-quality OE replacement coils are specifically designed for your S85-powered E60 M5, E63 M6, or E64 M6. Constructed with durable, heat-resistant plastic and featuring premium rubber spark plug boots, each boot is pre-lubricated with dielectric grease to ensure smooth installation and prevent corrosion.

Features & Benefits:

Bavarian Autosport Ignition Coils - Set of Ten Durable, temperature-resistant plastic construction is designed to withstand extreme heat and harsh conditions, ensuring long-lasting performance. High-quality rubber spark plug boots are pre-lubricated with dielectric grease to prevent moisture intrusion and potential corrosion. Built to meet or exceed OE manufacturing standards, guaranteeing a perfect fit, reliable performance, and seamless installation. NGK 4471 LKR8AP Spark Plugs - Set of Ten Multi-ground electrodes improve ignition capability and are less sensitive to increased voltage use with gap growth. Corrugated ribs prevent flashover. Copper core aids in heat removal. Pre-gapped to 0.035" (0.9mm) OEM-specified spark plug for all S85 applications.

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
Ships in 1 Business Day
$ 29.99

This product was last offered at the strikethrough price on
09-02-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up
BMW N54 3.0L Blow-By Vent Hose
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:594297
Part#: 11157553949
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up
This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. When installing one of our N54 Oil Catch Cans the connections on this hose will often break. We recommend replacing this hose at the same time as your catch can. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Show More Show Less

Glyco - Corporate Logo
T#:375825
Part#: 11241284849
Ships in 1 Business Day
$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 85.59 USD
Free Shipping on orders $49 and up
$ 85.59 USD
Free Shipping on orders $49 and up
Standard bore - 45mm

Elring Valve Cover Gasket Set - M54 2.5L 3.0L (09/2002+)
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362106
Part#: 11120030496
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

  • Valve cover gasket
  • Spark plug seals

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M54 2.5L 3.0L (09/2002+)

Show More Show Less
Rein - Corporate Logo
T#:370783
Part#: 11131437237
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up
Metal / Rubber gasket
OEM INA Idler / Deflection Pulley - E9x E82 E83 E60 E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:12945
Part#: 11287535860
In Stock
$ 23.28 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


For cars with the N52 6 cylinder engine.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2007-2010 E70 BMW X5 3.0si
2007-2010 E83 BMW X3 3.0i X3 3.0si

Show More Show Less


Elring - Corporate Logo
T#:340679
Part#: 11117587168
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N20
N52
N54
N55
S55

Show More Show Less
Ina - Corporate Logo
T#:19307
Part#: 11287556251
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
BMW E6X / E8X / E9X - N52 Replacement Starter Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777314
Part#: SR0492NKT2-KT
In Stock
Sale - Save 4% $ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Sale - Save 4%
$ 284.99

This product was last offered at the strikethrough price on
08-14-2026

$ 273.79 USD
Free Shipping on orders $49 and up
Is your car having trouble starting? Does your starter click when you turn the key? Sounds like it's time for a new starter motor! Includes new starter with no core charge, intake gaskets, throttle body gasket and hardware.
Show More Show Less

Ina - Corporate Logo
T#:403662
Part#: 11311738700
In Stock
$ 56.20

This product was last offered at the strikethrough price on
07-23-2026

$ 47.99 USD
Free Shipping on orders $49 and up
$ 47.99 USD
Free Shipping on orders $49 and up
Guide used to tension the timing chain

Elring Valvetronic Camshaft Adjuster Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:587127
Part#: 11127552280
In Stock
$ 28.79 USD
Free Shipping on orders $49 and up
Sits between the adjuster and the cylinder head
Elring Crankshaft Seal - Front
For vehicles with a production date up to 02/2011
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:362853
Part#: 11117547842
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
65x79x10 - Usually replaced when servicing the timing chains

Rein Alternator Mounting Screw Set
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:14795
Part#: 12310392568
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up


BMW Set Of Alu. Screws Generator -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less
Packaged by Turner - Corporate Logo
T#:22130432
Part#: 11287530314TKT
In Stock
Sale - Save 18% $ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 127.99

This product was last offered at the strikethrough price on
05-03-2026

$ 104.71 USD
Free Shipping on orders $49 and up
Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belt, tensioner assembly, and idler pulley. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
Show More Show Less

BMW M54 2.5L 3.0L Ultimate Valve Cover gasket Kit
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:379298
Part#: 11120030496KT
In Stock
$ 61.99 USD
Free Shipping on orders $49 and up

High-Quality Valve Cover Replacement for BMW Vehicles

Ensure peak engine performance with this specially designed valve cover replacement crafted for BMW vehicles. Engineered to prevent oil leaks and maintain optimal oil levels between intervals, this valve cover is an indispensable safeguard for your engine.

  • Prevents oil leaks and maintains optimal oil levels
  • Durable materials ensure reliable protection against gasket degradation
  • Safeguards the engine from potential damage due to oil leaks

Don't compromise on engine health. Replace your valve cover today to keep your BMW running smoothly and efficiently.

Show More Show Less

Genuine BMW Oil Change Kit / Inspection I - N52, N54, N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15511870
Part#: 832123659460KT
In Stock
$ 132.86 USD
Free Shipping on orders $49 and up
This oil change kit has everything you need for an easy oil change, including seven liters of oil, an oil filter, and a drain plug.
BMW N52 Valve Cover & PCV Valve Refresh Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:21735875
Part#: VALVECVRN52KT
In Stock
Sale - Save 11% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD
Free Shipping on orders $49 and up
Sale - Save 11%
$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD
Free Shipping on orders $49 and up
Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose
Show More Show Less
Ina - Corporate Logo
T#:19306
Part#: 11287557851
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less


OEM INA Deflection Pulley -- N62 E60/1 E63/4 E65/6/7 E53
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362736
Part#: 11287549557
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Elring Timing Cover Output Shaft Seal
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:591588
Part#: 11147647380
In Stock
$ 23.99 USD
Free Shipping on orders $49 and up
Seals the timing case on the front of the engine.
Turbo Coolant Line Kit - E60, E82, E88
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:42099865
Part#: 11537558900TKT
In Stock
Sale - Save 22% $ 253.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.79 USD
Free Shipping on orders $49 and up
Sale - Save 22%
$ 253.99

This product was last offered at the strikethrough price on
05-03-2026

$ 198.79 USD
Free Shipping on orders $49 and up
Prevent overheating issues and protect your turbo system with the Turbo Coolant Line Kit, the complete solution for keeping your N54 engine running at peak performance.

N54 Turbocharger Installation Kit - Front And Rear
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15511873
Part#: 114275634530KT
In Stock
Sale - Save 12% $ 299.95

This product was last offered at the strikethrough price on
05-03-2026

$ 264.60 USD
Free Shipping on orders $49 and up
Sale - Save 12%
$ 299.95

This product was last offered at the strikethrough price on
05-03-2026

$ 264.60 USD
Free Shipping on orders $49 and up
Ensure proper sealing when installing the turbos on your N54. Kit includes: 16 - ASA M7x39 studs 16 - Flange nuts All required gaskets and o-rings Water pump install hardware Replacement vacuum hose T-bolt clamps Helpful hints: For complete installation instructions, refer to Haynes Service Manual (ES2500921). Both downpipes must be removed to remove either front or rear turbo. Tie rod end may need to be separated from knuckle for clearance. Steering rack may also need to be rotated away from subframe for access. Valve cover heat shield will need to loosened and pushed upward to get clearance for turbo manifold removal. If studs back out of cylinder head and nuts are seized to studs, replace studs. Thread studs in to head by hand to prevent cross threading. When installing the new studs in the cylinder head, use a high temperature loctite in the cylinder head side, and copper anti-seize on the nut side. To make more room for access to the front turbo, remove the rubber line running in front of the subframe that attaches to the back of the map thermostat and remove the clip. Cut off the OEM clamp and replace it with a new hose clamp as well. Complete removal of the water pump is not required. Detach the water pump from the side of the block and push it out of the way to make more room for access to the front turbo. If water pump is unbolted from the block, the aluminum bolts must be replaced. Torque specs: Bracket to cylinder head: 9Nm Coolant supply line to crankcase: 9Nm Coolant return line to crankcase: 8Nm Coolant return line to turbo: 8Nm Coolant supply line to supply line: 8Nm Exhaust manifold heat shield: 8Nm Oil supply line to crankcase: 20Nm Oil pressure line to turbo: 8Nm Oil return line to crankcase: 8Nm Oil return line to turbo: 8Nm Turbo manifold to head: 20Nm
Show More Show Less

Elring Valve Cover Gasket Set - N52 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:348107
Part#: 11127581215
In Stock
$ 43.99 USD
Free Shipping on orders $49 and up

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes the following Seals:

  • Valve cover gasket
  • Spark plug seals

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L

Show More Show Less
Elring - Corporate Logo
T#:596447
Part#: 11217838071
In Stock
$ 43.92

This product was last offered at the strikethrough price on
09-04-2026

$ 38.99 USD
Free Shipping on orders $49 and up
$ 38.99 USD
Free Shipping on orders $49 and up

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56038085
Part#: 11137600482KT4
In Stock
New Item
$ 131.99 USD
Free Shipping on orders $49 and up
This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak
Show More Show Less
Ina - Corporate Logo
T#:42301978
Part#: ZC0286
In Stock
$ 26.99 USD
Free Shipping on orders $49 and up
Turner Motorsport offers this genuine OEM INA Engine Timing Chain (Upper) as a reliable solution to maintain BMW engine integrity and performance, ensuring your vehicle runs like new.

OEM Rein Valve Cover Assembly - BMW N52
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:45997479
Part#: VCE0102
In Stock
$ 292.99

This product was last offered at the strikethrough price on
04-26-2026

$ 248.99 USD
Free Shipping on orders $49 and up
$ 248.99 USD
Free Shipping on orders $49 and up
Rein OE Quality valve covers are designed and manufactured to be direct replacements for OE units. Rein valve covers have identical dimensions as genuine valve covers. Rein valve covers are manufactured to strict engineering standards using high quality materials to prevent leaks and warping.
Show More Show Less

Elring Valve Stem Seal Kit - E60 E63 E64 E90 E92 E93
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:596449
Part#: 11340032548
In Stock
$ 36.72

This product was last offered at the strikethrough price on
08-26-2026

$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up
WPC-Treated Performance Rod Bearing Replacement Kit - S85
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:36066212
Part#: 11247841703-KT2
In Stock
$ 1,283.99 USD
Free Shipping on orders $49 and up

The S85 engine has a known history of rod bearing failure. If your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing, a failure that has the potential to trash your crankshaft.

What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service!

Kit Includes:

Turner Motorsport "Race Series" WPC-Treated Rod Bearing Shells (20) Genuine BMW Connecting Rod Bolts (20) OEM MANN Oil Filter Kit Castrol Edge Euro Car Engine Oil (10w-60) - 9 Quarts Genuine BMW Oil Drain Plug Turner Oil Change Decal Elring Oil Pan Gasket Permatex Ultra Slick Engine Assembly Lube (4 oz.)

Show More Show Less
Elring - Corporate Logo
T#:373977
Part#: 11127501304
In Stock
$ 54.99 USD
Free Shipping on orders $49 and up

The head gasket is exposed to high pressure and heat for extremely long periods of time. Over a long period of time, these may develop a slight oil leak and must be replaced ASAP to prevent damage to the engine. It should also be replaced any time that the engine head is removed to ensure the best seal possible.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M52 2.5L 2.8L, M54 2.5L 3.0L

Show More Show Less


BMW Oil Pan Gasket
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15081515
Part#: 24117572618
In Stock
$ 51.99

This product was last offered at the strikethrough price on
04-15-2026

$ 36.99 USD
Free Shipping on orders $49 and up
$ 36.99 USD
Free Shipping on orders $49 and up
A pretty tell-tale sign that you may need a new oil pan gasket is if you notice leaking oil around or on the bottom of your oil pan. Act quickly and replace your oil pan gasket to prevent this from getting any worse!
Show More Show Less
Elring Cylinder Head Bolt Set
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:377135
Part#: 11127548799
Ships in 1 Business Day
$ 46.99 USD
Free Shipping on orders $49 and up
Head bolts are one time use, and under no circumstance should be reused. Head bolts stretch when torqued, and do not return to a non-stretched state.