If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

The water pumps in BMW N54 models are known for failure near 80,000 miles. This is a very common issue that often times leaves the owner stranded. This kit provides a single stop for the water pump and thermostat replacement to save the search and get you back on the road.

Included in this kit:

Thermostat
Water pump
Genuine BMW coolant
Mounting hardware required for both the thermostat and water pump

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Mahle-Behr thermostat
• Geba water pump
• Vaico coolant
• Mounting hardware required for the water pump
• O-rings for the thermostat housing

This item fits the following BMWs:
2005+ E60 BMW M5
2005+ E63 BMW M6

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Mahle-Behr thermostat with gasket
• Thermostat mounting hardware
• 1 liter of coolant

Applications:
1999-2003 E39 528i, 525i, 530i sedan, touring wagon (M52TU engine, M54 engine)
1999-2005 E46 323, 328, 325, 330 sedan, coupe, cabrio, touring wagon (M52TU engine, M54 engine)
2004-2005 E60 525i, 530i sedan, touring wagon (M54 engine)
2001-2006 E53 X5 3.0 (M54 engine)
2004-2006 E83 X3 2.5i X3 3.0i (M54 engine)
1999-2002 Z3 2.3. Z3 2.5i, 2.8 Z3 3.0i (M54 engine)
2003-2005 Z4 2.5i, Z4 3.0 (M54 engine)

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 2008-2010 E60 528i/528xi models with an automatic transmission (N52 engine).

Much of the later E60 cooling system is strong and reliable compared to the previous generation 5-series models. But there is still the potential for serious cooling system and engine-related failures. On the N52 engine the electric water pump is the weakest link. It will fail without much warning and shut down the engine. Preventative replacement is the best course of action and the water pump and thermostat should be done before they reach 60,000 miles. Several other cooling components are due for replacement by 100,000 miles to prevent other breakdowns. A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system.

Our base kit comes with the OEM Behr thermostat, Original BMW electric water pump with mounting screws, and the u-shaped hose between the pump and thermostat. From there you can add additional items to complete the overhaul - radiator, expansion tank, cap, and new radiator hoses..

E60 528i Automatic Radiator Options. There are two styles of radiators for the E60 6-cylinder and automatic transmission: original and updated. You can use either radiator as long as you have the correct corresponding parts to go with it. Both radiators are still available from BMW or the OE supplier Behr. If it were up to us we would prefer the updated style because it won't cause any confusion down the road and it reduces the number of potential leak points by eliminating an unnecessary fitting.

• Original, BMW #17117534914. This setup has an extra fitting for the engine oil heat exchanger along with a hose that attaches to the water pump pipe and heat exchanger. In order to use this radiator you must use the corresponding hose. This was the original setup as the car was built at the factory and is pictured in the radiator image to the right. At some point BMW stopped listing this part number in their official diagrams and used the 209 number below.
• Updated, BMW #17117519209. This is the updated style from BMW. If your radiator was replaced at some point after 2010 it most likely has this radiator style. On this radiator they did away with the extra fitting for the heat exchanger. When looking at the ETK or RealOEM diagrams it will only list this radiator but with a note saying you also need two compensators (spacer blocks, #17117520335) and the hose (11537519494).

Click here for diagrams of both E60 radiator options.

E60 528i Cooling Hoses. There are a lot of hoses on the N52 engine. Not all of them need to be replaced during an overhaul but it would be a good idea. The hoses themselves don't wear but the metal spring clips on the connector lose their tension over time and that can lead to a leak. It's worse when re-using a hose after it's already been disconnected. Since our package includes the thermostat, water pump, and radiator we offer all of the hoses related to those components. Use the diagram on the right to see where each is connected in the engine bay. Evaluate your current hoses and then decide which ones to replace. One note about the lower radiator hose: when ordering a new hose you must order a new temp sensor. Do not reuse the original temp sensor as it will leak on the new hose.

This item fits the following BMWs:
2008-2010 E60 BMW 528i 528xi with automatic transmission

The cooling system is one of the major weak points on the N62 engine in the 550i/650i. The water pump itself won't last more than 100,000 miles in most cases and the engine itself is prone to coolant leaks from multiple locations. So a major 550i cooling system overhaul should be planned before the 100,000 mile mark. Aside from obvious leaks the 550i water pump will also squeal or screech indicating the bearings inside have worn. This package covers the water pump, thermostat, and radiator for the 2006-2010 E60 550i and E63 650i with a manual transmission.

The entire cooling system on the 550i is susceptible to leaks and poor performance. The condition of the rest of the cooling system should be considered along with the water pump and thermostat. Replacing the water pump will expose the front of the V8 engine where more problem areas may appear so plan accordingly. The biggest problem is the V8 valley pan gaskets and inner coolant tube seals. The tube carrying coolant through the valley is prone to leaking and replacement is a major job (see our valley pan pipe kit here). Additional items recommended to be replaced during the water pump job are: cooling hoses, expansion tank and cap, temp sensors, drive belts, and pulleys and tensioners.

Base 550i/650i Cooling Package includes:

• OEM Behr radiator (17117519210)
• OEM water pump (11517586779)
• water pump pipe (back of pump to engine block) (11511439976)
• OEM thermostat (11537586885)
  
• BUY AS A PACKAGE AND SAVE $$!
  
  This item fits the following BMWs:
  2006-2010 E60 BMW 550i with manual transmission
  2006-2011 E63 BMW 650i with manual transmission

Enhance the flexibility of your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting. Ideal for applications such as single turbo setups or forward-facing intake manifolds, this fitting provides extra clearance and versatile hose routing options.

Key Benefits:

• Allows hose to run straight down, increasing clearance
• Made of durable 6061-T6 aluminum for long-lasting performance
• Anodized black finish for enhanced durability and corrosion resistance
• Includes fitting and clamp for easy installation

Upgrade your BMW's coolant system with the Vargas Turbo Technologies 90-Degree Coolant Tank Fitting for improved performance and versatility.

Ensure your BMW's optimal performance by replacing a failing water pump with this high-quality replacement. Detectable by symptoms like coolant leaks or whining noises from under the hood, a failing water pump can lead to overheating issues. Don't risk engine damage; keep an eye out for warning signs and promptly replace the water pump. This replacement kit includes one-time-use aluminum mounting bolts for a secure installation.

Product Benefits:

• Prevents coolant leaks
• Eliminates whining noises from the engine
• Avoids overheating issues
• Includes one-time-use aluminum mounting bolts for secure installation

Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN

Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.

The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.   

Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.  

For vehicles with plastic thermostat housing 

Replacement stock MAP thermostat with plastic housing and gasket for E46, E39, E60, X5, Z4 - M54 engine, M52TU engine. Your car may still operate fine according the instrument display but the electrically-operated thermostat may be going bad. This new thermostat includes the thermostat gasket, ready to install in your BMW.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

Applications:
1999-2003 E39 528i, 525i, 530i sedan, touring wagon (M52TU engine, M54 engine)
1999-2005 E46 323, 328, 325, 330 sedan, coupe, cabrio, touring wagon (M52TU engine, M54 engine)
2004-2005 E60 525i, 530i sedan, touring wagon (M54 engine)
2001-2006 E53 X5 3.0 (M54 engine)
2004-2006 E83 X3 2.5i X3 3.0i (M54 engine)
1999-2002 Z3 2.3. Z3 2.5i, 2.8 Z3 3.0i (M54 engine)
2003-2005 Z4 2.5i, Z4 3.0 (M54 engine)

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Bavarian Autosport Water Pump (11517632426)