Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E61 Fuel System Parts

BMW E61 Fuel System Parts Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.
You're currently viewing parts for your (E61) 5-Series Touring 2006-2010. Reset your chassis
For accurate results, specify your model below.
Fuel-It! Stage 2 LPFP Upgrade - N54 E6X

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

  • Trade-in:
    • This option allows you to receive a rebuilt/upgraded stock bucket with a new Walbro 450 pump, filter, and fittings to swap out your stock LPFP assembly.  A $150 core deposit is included in the price that will be refunded when we receive your *stock bucket.
  • New Build:
    • This option includes a new LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit is required but you are eligible for a core refund of $50 should you elect to return your *stock bucket.

Both options include the following:

  • A complete plug and play solution by simply replacing your stock bucket
  • A new E85 compatible Walbro 450 pump
  • A new Walbro filter
  • A custom fitting that is tuned to optimize the venturi and pump output
  • Spare vent tube clip
  • Flow testing prior to shipping
  • Recommended accessories:
    • Lock Ring Removal Tool 

 To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning) 

+ International customers:  Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection.  For this reason, we are no longer sending the top hat to international customers as this often causes confusion.  Those customers will simply re-use their current top hat when installing their Stage 2 pump.

 

- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.

Fuel-It!
Part #: BMW-S2LPFP-E6X
Price: $810.00 (USD) 
Direct Ship
Quantity:   
Genuine BMW N54 / N63 Fuel Injector - E9x 335i, E60 535i & more Replace your faulty N54 / N63 engine's high pressure fuel injector with this latest generation Genuine BMW part. This part replaces 13537585261 and 13537565138 and has improved filtering and thermo compensating oil than previous versions. Sold individually!

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E92 BMW 335is - Coupe
2007-2010 E93 BMW 335i - Convertible
2010-2013 E93 BMW 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
2010-2012 F07 BMW 550i GT, 550i xDrive GT
2011-2012 F10 BMW 550i 550i xDrive
2012 F12 BMW 650i 650i xDrive
2009-2012 F01 BMW 740i 740li 740li xDrive 750i 750li 750i xDrive 750li xDrive 760li
2009-2012 F01 BMW 760li
2011-2013 E70 BMW X5 xDrive50i
2010-2013 E70 BMW X5M
2008-2010 E71 BMW X6 xDrive35i X6 xDrive50i X6M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
Genuine BMW
Part #: 13538616079
Price: $249.95 (USD) 
$326.40 (23% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
Genuine BMW Rubber Seal B10 - 16146750467 - E63,E65,E83,E60 M5,E63 M6

Genuine BMW Rubber Seal - B10
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63,E65,E83 X3

Fits BMW Engines including:
M54,N52,N52N,N54,N62,N73,S85,N62N

Genuine BMW
Part #: 16146750467
Price: $9.23 (USD) 
Ships in 6 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
URO
Part #: 16146750467
Price: $5.13 (USD) 
Ships on Aug 1, 2018
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Gas Cap - Most BMWs 2000+ This gas cap fits the model year 2000+ BMW E46 E39 E9X E82 E60 E63 E65 E83 E70 E71. This fuel cap is an original BMW product. A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2000-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006+ E9X BMW 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3
2000-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 535i 535xi 545i 550i M5
2004+ E63 BMW 645ci 650i M6
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 750i 750li
2004-2011 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i X5 M X5 xDrive35d
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6 M
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2002-2006 R50 MINI MINI Cooper
2005-2008 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-2006 R53 MINI MINI Cooper S
2007+ R56 MINI MINI Cooper, MINI Cooper S
2007+ R55 MINI MINI Cooper Clubman, MINI Cooper S Clubman
2007+ R57 MINI MINI Cooper Convertible, MINI Cooper S Convertible,
Genuine BMW
Part #: 16117222391
Price: $23.89 (USD) 
$30.97 (23% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW High Pressure Fuel Pump - 135i, 335i, 535i

This is the updated high-pressure fuel pump for BMW's with the N54 or N55 turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Includes a $169.50 refundable core charge


This item fits the following BMWs:
2008-3/2012 E82 BMW 135i 1M Coupe
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-3/2012 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-3/2012 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
2010-3/2012 F07 BMW 535i GT, 535i xDrive GT
2011-3/2012 F10 BMW 535i 535i xDrive
2009-2011 F01 BMW 740i 740l
2011-4/2012 F25 BMW X3 xDrive35i
2007-4/2012 E70 BMW X5 xDrive35i
2008-4/2012 E71 BMW X6 xDrive35i
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

Genuine BMW
Part #: 13517616170
Price: $903.79 (USD) 
Ships in 6 days
Free Shipping Free Shipping
Quantity:   
Genuine BMW Fuel Filter - E60/61 N54

This is an OEM replacement fuel filter. BMW recommends changing the fuel filter every 60,000 miles to keep your fuel injection system clean.

Genuine BMW FUEL FILTER
Fits BMW Engines including:
N54

Genuine BMW
Part #: 16147373523
Price: $126.32 (USD) 
$153.06 (17% off MSRP)
Ships in 6 days
Free Shipping Free Shipping
Quantity:   
Low Fuel Pressure Sensor - E82, E9x, E60, F01, F10, F12 This Genuine BMW low pressure fuel sensor is commonly a cause of a "Increased Emissions" warning on the idrive and for check engine (SES) lights on BMW's with the N54 6 cylinder turbo engine or the S65 V8 engine in the M3. It will also fit a limited number of cars with the N55 engine.

This sensor can be traced to a number of drivability issues, including cold start running problems, misfires, stumbling, hesitations, and overall rough running. You will likely have a code for the misfires, rich condition, or for the sensor itself. In some cases, the combination of codes can bring about a limp mode. Replacing this sensor is an easy and inexpensive first step if you're having any of these issues.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2008-2013 E9X BMW M3
2004-2010 E60 BMW 535i 535xi 535i xDrive
2010-2011 F07 BMW 535i GT, 535i xDrive GT
2011 F10 BMW 535i 535i xDrive
>9/2011 F12 BMW 640i
2009+ F01 BMW 740i 740li
2008-2010 E71 BMW X6 xDrive35i
Genuine BMW
Part #: 13537614317
Price: $88.19 (USD) 
$102.69 (14% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Fuel-It! E-Series Direct Port Meth Injection Kit - E-Series N54/N55

Are you running meth or planning to run meth but want better control, distribution, and additional capacity?  If so, this kit is for you. 

Our Direct Port Meth Injection (DPMI) kits have six individually controlled methanol compatible injectors that are boost and RPM referenced so the days of on/off meth control or trying to control meth flows by varying the power signal to the pump are gone.

What is direct port meth injection?

Direct port meth injection is a kit that is installed between your intake manifold and the cylinder head to provide you with better control and more flow potential to each individual cylinder.  If you are currently running meth this provides more accurate distribution and control than standard charge pipe injection.  In addition, our standard kit will connect to your existing 1/4" methanol line if it's already installed.

What does the kit include?

Our DPMI it includes the following:

  • Direct Port Methanol Injection Spacer featuring:
    • 100% Billet aluminum construction
    • Anodized aluminum hardware for compatibility with methanol
    • Six 500cc methanol compatible injectors
    • Additional ports on the methanol rail to supply charge pipe injection should you choose
  • Six OEM gaskets to install the new spacer
  • Seven extended bolts to mount the spacer and intake manifold
  • 36" Stainless Steel braided -6an methanol line
  • -6an to 1/4" tube adapter

What additional components will I need?  (If you don't currently have a methanol kit, we'd suggest purchasing one from Burger Tuning)

  • Methanol tank
  • Methanol pump
  • FSB (Pump controller)
  • 1/4" methanol line
  • Methanol Port Injection Controller

Do I need a solenoid?

No, not for a standard installation.  If you wish to run a small meth nozzle in the charge pipe for IAT suppression, you can do so with the addition of a solenoid, meth line, adapter at the meth rail, and nozzle in the charge pipe.  If you choose to do this, we'd recommend a very small nozzle such as a CM5 or CM7. 

Will this fit my car?

If you are driving an E-Series N54 or N55, yes. 

 

*These kits are available for off-road use only

*All Direct Port Methanol Injection kits are built to order.

Fuel-It!
Part #: BMW-EDPMI
Price: $1199.95 (USD) 
Direct Ship
Quantity:   
OEM Bosch Fuel Pressure Sensor - N54 N55 N63 S55 S63 S65

This sensor monitors the pressure of the fuel coming from the high pressure fuel pump, looking for low pressure, to determine if your HPFP is functioning correctly.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This part works with the following engines:
N54, N55, N63, S55, S63, S65

Bosch
Part #: 13537622231
Price: $49.49 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW N54/N63/S63 Fuel Injector - E9x 335i, E60 535i & more

Replace your faulty N54 / N63 engine's high pressure fuel injector with this latest generation Genuine BMW part. This part replaces 13537585261, 13537565138, and 13538616079 via service bulletin SIB 13 08 15 at a much lower cost and has improved filtering and thermo-compensating oil than previous versions. Sold individually!

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

It is recommended to replace all fuel injectors at once to ensure all are up to date and perform optimally.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E92 BMW 335is - Coupe
2007-2010 E93 BMW 335i - Convertible
2010-2013 E93 BMW 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
2010-2012 F07 BMW 550i GT, 550i xDrive GT
2011-2012 F10 BMW 550i 550i xDrive
2012 F12 BMW 650i 650i xDrive
2009-2012 F01 BMW 740i 740li 740li xDrive 750i 750li 750i xDrive 750li xDrive 760li
2009-2012 F01 BMW 760li
2011-2013 E70 BMW X5 xDrive50i
2010-2013 E70 BMW X5M
2008-2010 E71 BMW X6 xDrive35i X6 xDrive50i X6M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

Genuine BMW
Part #: 13538648937
Price: $214.95 (USD) 
$316.90 (32% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Fuel Injector Decoupling Element N54 N63 N74 Engine FUEL INJECTOR DECOUPLING ELEMENT N54 N63 N74 ENGINE

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Fits BMW Engines including:
N54,N54T,N63,N63N,S63
Genuine BMW
Part #: 13537564751
Price: $8.13 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
N54 High Pressure Fuel Pump Replacement Kit

HPFP is a common failure component on the N54 engine, this kit contains every thing needed to replace the fuel pump and get you car back on the road.

Kit includes:

  • Re manufactured High pressure fuel pump with $50 core charge
  • Intake manifold gasket sets  
  • Throttle body gasket 
  • Low pressure fuel sensor 
  • High pressure fuel sensor 
Packaged by Turner
Part #: 13517616446rKT1
Price: $585.79 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Genuine BMW Fuel Supply Inlet Pip - 13537622751 - N54

Delivers fuel to the high pressure fuel pump.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Supply Line With Sensor
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

 

Genuine BMW
Part #: 13537622751
Price: $155.53 (USD) 
$183.62 (15% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
Fuel-It! Port Injection Kit - N54 E6X

Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?

Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.

What is port injection?

Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of.  It's a relatively easy system to install and does not require any permanent modification to your car.

Port injection kits are offered in five different packages to meet your needs:

Base port injection kit: (included in Bronze, Silver or Platinum Kits)

  • Fuel-It! custom black anodized spacer for the intake manifold
  • Fuel-It! custom black anodized fuel rail
  • Black anodized aluminum and stainless steel hardware
  • Dual fuel supply port for those that are running inlets in the stock location (email us for info)
  • Optional return port for those that will be running an upgraded fuel pressure regulator 
  • Six of the following:
    • Flow matched Bosch injectors (52#)
    • Extended length steel bolts for mounting your new spacer 
    • BMW OEM gaskets

Bronze kit includes:

  • Base port injection kit
  • Basic fuel line connection kit
    • Two custom Fuel-It! fittings to maintain your stock fuel line connections at the HPFP and the feed line as it enters the engine bay
    • -6an (3/8") upgraded fuel lines
    • High flow custom Fuel-It! "Y" adapter
    • -6an fuel rail connection

Silver kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line

Platinum kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line​
  • Integrated ethanol sensor​
  • Bluetooth and JB4 compatible ethanol analyzer
    • JB4 integration compatible 0-5volt
    • Bluetooth (iPhone or Android app must be purchased to use this feature)

*These kits are available for off-road use only

*All port injection kits are built to order.

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.

 

Fuel-It!
Part #: FIEPIK2
Price: $1598.95 (USD) 
Direct Ship
Right Fuel Level Sensor - E60, E60 M5, E63, E63 M6 This Fuel Level Sensor fits BMW E60 5 series and E63 6 series. This sensor is located in the fuel tank and can be accessed under the rear seat. If your fuel gauge is not functioning properly there is a good chance this item is the culprit. This sensor is the one located on the right (passenger) side and mounts on the fuel pump.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2004-2010 E63 BMW 645ci 650i M6
Genuine BMW
Part #: 16146765824
Price: $107.73 (USD) 
$120.99 (11% off MSRP)
Ships in 6 days
Free Shipping Free Shipping
Quantity:   
Elring Fuel Injector O-Ring - N52 3.0L

These o-rings need to be replaced any time that the fuel injectors are pulled. These have a habit of swelling and can tear or suffer other damage when being reinstalled or when removed. If the seal is not tight, this could lead to a fuel leak or worse.This Elring o-ring will ensure the seal is nice and tight

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
N52 3.0L

Elring
Part #: 13647531313
Price: $2.19 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity: