BMW Intake Parts for BMW 5 Series E61 (2006-2010)

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

A faulty throttle body can cause poor engine operation or even complete failure to function. Replace your malfunctioning throttle body with a high quality OEM VDO unit to restore proper engine operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Turbosmart GenV Raceport BOV (Fits competitors 50mm / female style flange. No weld flange included)

The Race Port is renowned for its exceptional compactness and lightweight design tailored for turbocharged competition-level engines. With its innovative collar design and internal flow structures, this BOV stands out as 50% lighter and 25% smaller than competing models, yet it boasts an impressive flow rate of 330 CFM, making it the market's top-performing BOV in its category.

Fits Chargepipes With Tial/Turbosmart Flange

This dual-cone intake for the 135/335/535 is similar to the enclosed carbon fiber intake but without the surrounding air box. If you love the look of the open filters and high-tech carbon fiber, this is the kit for you. High-flow cotton air filters connect to CAD engineered carbon fiber intake tubes for an improvement in air flow. The open filter layout releases more intake roar than the stock muffled intake.

135/335/535 ECS open DCI intake features -

• Designed and engineered using CAD technology for optimal flow and fitment
• Washable/reusable high flow cotton filters (pre-oiled)
• Stainless steel hardware
• Direct replacement for stock air box; integrates seamlessly with stock intake piping
• Beautiful and functional carbon fiber/e-fiberglass construction

K&N's drop-in air intake filter is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance drop-in intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase! 

K&N's drop in air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!

• Covered by the K&N Million Mile Limited Warranty
• Washable and reusable
• Emissions legal in all 50 states
• Will not void vehicle warranty

K&N drop-in air filter for 335i and 335xi (E90, E91, E92, E93 chassis), 135i (E82 E88 chassis) and 2007-2010 535i & 535xi (E60 chassis). This filter drops into the air box in minutes, just as the stock air filter element does.

This K&N air filter fits the following BMWs::
2008-2010 E82/E88 1 series 135i
2011 E82 1 series 1M
2007-2010 E90 3 series sedan - 335i and 335xi sedan (N54)
2007-2010 E92 3 series coupe - 335 & 335xi coupe
2010+ E92 3 series coupe - 335is
2007-2010 E93 3 series convertible - 335i convertibles
2007-2010 E60 5 series 535i & 535xi turbo sedan

Vargas Turbo has you covered when you are installing a custom turbo setup. With all of the adapters you need and all the valves necessary, the only real limiting factor is your imagination!

The VTT PCV Flapper delete is used to get rid of the factory flapper, and add a -10 fitting on N54 powered vehicles. This will allow you to run a single or dual external catch can, or your own custom set up.

This fitting is made from 6061-T6 aircraft aluminum anodized black and comes with O-ring, and a stainless steel holding clip.

This part fits the following BMW engines:
2006-2012 N54

This is the replacement mass air sensor to fit the M54 and N52 engine used in the E9x 325i, 330i, E60 525i 530i and Z4 with N52 engine. This HFM is manufactured by OEM supplier Siemens/VDO and is a direct replacement for the stock HFM. The mass air sensor/meter measures the volume of air being fed into the engine so that the fuel levels can be adjust for optimal performance. A faulty sensor can lead to improper fuel mixture and rough idle and poor performance and gas mileage. Replace your faulty sensor with a high quality OEM VDO sensor to restore normal operation. 

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2006-2006 E90 BMW 325i 325xi 330i 330xi - Sedan
2006 E91 BMW 325xi - Wagon
2004-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si