Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Don't take your car's cooling system for granted. A waterpump failure can cost you an engine, which is why preventatively replacing your BMWs waterpump and refreshing the cooling system every 60,000 miles. The water pump is a weak point is the cooling system. Replacing your waterpump will go a long way for keeping your car on the road and operating properly. This water pump fits many 2006 and newer BMW 6 cylinder engines, specifically all the BMWs with the N51, N52, N53 engines. You will also need to purchase replacement aluminum screws Part #11510392553 

Pierburg pumps are some of the most trusted and widely used on the market. From fuel, water, air and vacuum Pierburg has you covered with OE quality and reliable performance year after year.

This water pump fits the following BMWs:
2008-20xx E82 128i
2006-2006 E90 325i sedan, 330i sedan, 325xi sedan, 330xi sedan
2007-2012 E90 328i sedan, 328xi sedan, 328i xDrive sedan
2007-2012 E92 328i coupe, 328xi coupe, 328i xDrive coupe
2007-2012 E93 328i Convertible
2006-2006 E60 525i, 525xi, 530i, 530xi
2007-2010 E60 528i, 528xi, 528i xDrive
2007-2010 E83 X3 3.0i X3 3.0si
2007-20xx E70 X5 3.0si X5 xDrive30i 
2006-2008 E85 Z4 3.0si
2009-20xx E89 Z4 sDrive30i

Ensure your BMW's optimal performance by replacing a failing water pump with this high-quality replacement. Detectable by symptoms like coolant leaks or whining noises from under the hood, a failing water pump can lead to overheating issues. Don't risk engine damage; keep an eye out for warning signs and promptly replace the water pump. This replacement kit includes one-time-use aluminum mounting bolts for a secure installation.

Product Benefits:

• Prevents coolant leaks
• Eliminates whining noises from the engine
• Avoids overheating issues
• Includes one-time-use aluminum mounting bolts for secure installation

If your tank is cracked or leaking, this OE BMW expansion tank is the perfect option to get rid of the leak and prevent coolant loss.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Expansion Tank-
Fits the following BMW chassis's:
E60,E61,E62,E63

Introducing Mishimoto's Universal Oil Cooler (19 row with Thermostat)

In pursuit of optimal engine lubrication, even under ideal driving conditions, is paramount for BMW owners. Elevated oil temperatures can compromise oil pressure and hinder efficient lubrication. Turner Motorsport's new oil cooler offers a solution to maintain cool oil temperatures, ensuring your engine functions at its best. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter.

Key Features:

• Effective Heat Dissipation: The oil cooler efficiently dissipates heat, keeping oil temperatures within the optimal range for peak engine performance.
• Comprehensive Kit: This kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, providing everything you need for a seamless installation.
• Precise Temperature Control: Equipped with a thermostat for fine temperature and flow control, ensuring the ideal oil temperature is maintained.
• Proposition 65 Compliant: This product complies with Proposition 65, a California law that ensures product safety.

Elevate your BMW's engine performance and protect it from the effects of elevated oil temperatures. Turner Motorsport has the solution you need.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, see: www.P65Warnings.ca.gov.

The N5X family of engines marked the start of a new era for BMW. The all-new aluminum block powerplants featured a host of technical upgrades, aiding in power output, reliability, and performance. Among these technological advances is an external electronic water pump, which removed load from the engine's accessory drive and allowed for advanced pulse-width-modulated (PWM) control.

From factory, the N52's electronic water pump is limited to a measly 200W output—strong enough for daily driving, but lacking in performance applications. Recognizing this shortcoming, ECS engineers set out to create a high-flow water pump upgrade that doesn't break the bank. Their high-quality adapter wiring harness and bracket allow you to install a 400W N54 water pump without any modification, an effortless, yet effective upgrade that doubles the output of the factory water pump!

By increasing coolant flow capacity, the 400W pump improves heat extraction from the cylinder head and engine block during high-load operation. This added thermal headroom is particularly beneficial for modified engines, sustained aggressive driving, track use, or operation in elevated ambient temperatures where the factory pump can operate near its limits. Improved circulation helps maintain more stable coolant temperatures and reduces the risk of localized hot spots.

Features & Benefits:

Upgrades to the more powerful 400W N54 water pump for increased coolant flow and improved engine cooling efficiency Sealed adaptor harness ensures secure connections and optimal operation under demanding conditions The N54 pump's higher power output offers longer-lasting, more effective cooling compared to the stock N52 pump Design:

40A fused power wire safely handles the increased power demands of the N54 pump, providing consistent and stable performance Sealed and robust construction, designed to withstand heat and moisture, ensuring reliability in even the most challenging environments Plug-and-play compatibility is designed for easy integration with the N52 engine and N54 water pump, minimizing installation time and complexity Kit Contents:

ECS N54 Water Pump Adapter Kit Conversion wiring harness Aluminum bracket Installation hardware Bavarian Autosport Water Pump (11517632426)

The perfect upgrade for your connection between your thermostat and cylinder head. Designed using durable silicone and billet aluminum to greatly outlast the OE rubber and plastic combination.

Some of the weakest point of the cooling systems in BMW's can come down to the OE plastic fittings breaking down from the constant changes in temperature softening these plastic components. When this happens even simply moving the hose slightly could cause the fitting to crack causing the coolant to leak all over. The ECS design silicone hose with billet aluminum adapter retains OE fitment with superior strength to not only handle the performance, but stand up to the wear and tear of a daily driver.

Features: 

• Manufactured from billet 6061-T6 with type III anodize for exceptional durability and corrosion resistance.

  • Much stronger part than OEM plastic

  • Will not become brittle and fatigue over time due thermal cycling.  This will prevent the part from breaking during removal and re-installation.

• Constructed of 4-Ply reinforced silicone for improved durability over the failure prone OE rubber hose.
• Flourosilicone lined internal layer for exceptional chemical resistance.
• Silicone offers reduced thermal conductivity as well as improved resistance to ozone and UV degradation for improved performance and durability.
• Follows OEM form for perfect fitment.
• Utilizes OEM O-ring 11537545278 to ensure a proper seal.